Searching minima of an N-dimensional surface: A robust valley following method

AbstractA procedure is proposed to follow the “minimum path” of a hypersurface starting anywhere in the catchment region of the corresponding minimum. The method uses a modification of the so-called “following the reduced gradient” [1]. The original method connects points where the gradient has a constant direction. In the present letter, this is replaced by the successive directions of the tangent of the searched curve. The resulting pathway is that valley floor gradient extremal which belongs to the smallest (absolute) eigenvalue of the Hessian. The new method avoids third derivatives of the objective function. The effectiveness of the algorithm is demonstrated by using a polynomial test, the notorious Rosenbrock function in two, 20, and in 100 dimensions

Integrated thermal treatment system study -- Phase 2 results. Revision 1

This report presents the second phase of a study on thermal treatment technologies. The study consists of a systematic assessment of nineteen thermal treatment alternatives for the contact-handled mixed low-level waste (MLLW) currently stored in the US Department of Energy complex. The treatment alternatives consist of widely varying technologies for safely destroying the hazardous organic components, reducing the volume, and preparing for final disposal of the MLLW. The alternatives considered in Phase 2 were innovative thermal treatments with nine types of primary processing units. Other variations in the study examined the effect of combustion gas, air pollution control system design, and stabilization technology for the treatment residues. The Phase 1 study examined ten initial thermal treatment alternatives. The Phase 2 systems were evaluated in essentially the same manner as the Phase 1 systems. The alternatives evaluated were: rotary kiln, slagging kiln, plasma furnace, plasma gasification, molten salt oxidation, molten metal waste destruction, steam gasification, Joule-heated vitrification, thermal desorption and mediated electrochemical oxidation, and thermal desorption and supercritical water oxidation. The quantities, and physical and chemical compositions, of the input waste used in the Phase 2 systems differ from those in the Phase 1 systems, which were based on a preliminary waste input database developed at the onset of the Integrated Thermal Treatment System study. The inventory database used in the Phase 2 study incorporates the latest US Department of Energy information. All systems, both primary treatment systems and subsystem inputs, have now been evaluated using the same waste input (2,927 lb/hr). 28 refs., 88 figs., 41 tabs

Process modeling for the Integrated Thermal Treatment System (ITTS) study

This report describes the process modeling done in support of the integrated thermal treatment system (ITTS) study, Phases 1 and 2. ITTS consists of an integrated systems engineering approach for uniform comparison of widely varying thermal treatment technologies proposed for treatment of the contact-handled mixed low-level wastes (MLLW) currently stored in the U.S. Department of Energy complex. In the overall study, 19 systems were evaluated. Preconceptual designs were developed that included all of the various subsystems necessary for a complete installation, from waste receiving through to primary and secondary stabilization and disposal of the processed wastes. Each system included the necessary auxiliary treatment subsystems so that all of the waste categories in the complex were fully processed. The objective of the modeling task was to perform mass and energy balances of the major material components in each system. Modeling of trace materials, such as pollutants and radioactive isotopes, were beyond the present scope. The modeling of the main and secondary thermal treatment, air pollution control, and metal melting subsystems was done using the ASPEN PLUS process simulation code, Version 9.1-3. These results were combined with calculations for the remainder of the subsystems to achieve the final results, which included offgas volumes, and mass and volume waste reduction ratios

Interplay between the Gentlest Ascent Dynamics Method and Conjugate Directions to Locate Transition States

An algorithm to locate transition states on a potential energy surface (PES) is proposed and described. The technique is based on the GAD method where the gradient of the PES is projected into a given direction and also perpendicular to it. In the proposed method, named GAD-CD, the projection is not only applied to the gradient but also to the Hessian matrix. Then, the resulting Hessian matrix is block diagonal. The direction is updated according to the GAD method. Furthermore, to ensure stability and to avoid a high computational cost, a trust region technique is incorporated and the Hessian matrix is updated at each iteration. The performance of the algorithm in comparison with the standard ascent dynamics is discussed for a simple two dimensional model PES. Its efficiency for describing the reaction mechanisms involving small and medium size molecular systems is demonstrated for five molecular systems of interest

Quantum Zermelo problem for general energy resource bounds

A solution to the quantum Zermelo problem for control Hamiltonians with general energy resource bounds is provided. Interestingly, the energy resource of the control Hamiltonian and the control time define a pair of conjugate variables that minimize the energy-time uncertainty relation. The resulting control protocol is applied to a single qubit as well as to a two-interacting qubit system represented by a Heisenberg spin dimer. For these low-dimensional systems, it is found that physically realizable control Hamiltonians exist only for certain, quantized, energy resources.Comment: 13 pages, 1 figur

Integrated thermal treatment system study. Phase 2. Addendum system A8

This is an addendum to the Integrated Treatment System Study - Phase 2 Results report. This addendum describes the technology and the operation of System A-8, Rotary Kiln, Air Combustion Gas, Dry-Wet APC, and Grout Stabilization. A process flow diagram, functional allocation diagrams, and plan views and perspective views for this system are attached. Detailed cost information for this subsystem is reported in Appendix A of this addendum

Depleted uranium plasma reduction system study

A system life-cycle cost study was conducted of a preliminary design concept for a plasma reduction process for converting depleted uranium to uranium metal and anhydrous HF. The plasma-based process is expected to offer significant economic and environmental advantages over present technology. Depleted Uranium is currently stored in the form of solid UF{sub 6}, of which approximately 575,000 metric tons is stored at three locations in the U.S. The proposed system is preconceptual in nature, but includes all necessary processing equipment and facilities to perform the process. The study has identified total processing cost of approximately $3.00/kg of UF{sub 6} processed. Based on the results of this study, the development of a laboratory-scale system (1 kg/h throughput of UF6) is warranted. Further scaling of the process to pilot scale will be determined after laboratory testing is complete

USNRC-OECD Halden Project fuel behavior test program: experiment data report for test assemblies IFA-226 and IFA 239

The experimental data which were obtained from the IFA-226 and IFA-239 test assemblies during operation in the Halden Boiling Water Reactor are reported. Included are cladding elongation, fuel centerline temperature, internal gas pressure, and power history data from IFA-226 which were obtained from November 1971 through April 1974, and cladding elongation, diametral profile, and power history data from IFA-239 covering the period from March 1973 through April 1974. The data, presented in the form of composite graphs, have been analyzed only to the extent necessary to assure that they are reasonable and correct. A description of these mixed oxide fuel test assemblies and their instrumentation is presented. Test pin fabrication history, instrument calibration data, assembly power calibration methods, and the neutron detector data reduction technique are included as appendices. (auth

Integrated nonthermal treatment system study

This report presents the results of a study of nonthermal treatment technologies. The study consisted of a systematic assessment of five nonthermal treatment alternatives. The treatment alternatives consist of widely varying technologies for safely destroying the hazardous organic components, reducing the volume, and preparing for final disposal of the contact-handled mixed low-level waste (MLLW) currently stored in the US Department of Energy complex. The alternatives considered were innovative nonthermal treatments for organic liquids and sludges, process residue, soil and debris. Vacuum desorption or various washing approaches are considered for treatment of soil, residue and debris. Organic destruction methods include mediated electrochemical oxidation, catalytic wet oxidation, and acid digestion. Other methods studied included stabilization technologies and mercury separation of treatment residues. This study is a companion to the integrated thermal treatment study which examined 19 alternatives for thermal treatment of MLLW waste. The quantities and physical and chemical compositions of the input waste are based on the inventory database developed by the US Department of Energy. The Integrated Nonthermal Treatment Systems (INTS) systems were evaluated using the same waste input (2,927 pounds per hour) as the Integrated Thermal Treatment Systems (ITTS). 48 refs., 68 figs., 37 tabs

Role of biomechanics in the understanding of normal, injured, and healing ligaments and tendons

Ligaments and tendons are soft connective tissues which serve essential roles for biomechanical function of the musculoskeletal system by stabilizing and guiding the motion of diarthrodial joints. Nevertheless, these tissues are frequently injured due to repetition and overuse as well as quick cutting motions that involve acceleration and deceleration. These injuries often upset this balance between mobility and stability of the joint which causes damage to other soft tissues manifested as pain and other morbidity, such as osteoarthritis