1,030 research outputs found
Analysis of road traffic crashes in the State of Qatar
Road traffic crashes (RTCs) are globally acknowledged as increasing threat to society, because they can affect many lives when they result in severe injury or fatality. In the State of Qatar RTCs are getting more awareness and attention, aiming to improve the traffic safety in the country. This study is an exploratory research providing different analyses of the crash data for seven consecutive years, ranging from 2010 to 2016, which is obtained from the Traffic Department in the Ministry of Interior for the State of Qatar. The objectives aim to evaluate the trend of RTC rate over time and create understanding of the influencing factors related to RTC frequency. Time series analyses show an increasing trend of RTCs leading to severe injury and a slight decreasing trend for fatal RTCs. Secondly, different RTC severity levels are related to diverse RTC causes. Furthermore, the results revealed that crashes with severe injuries or fatality for drivers as well as pedestrians are found to be significantly affected by seasonal weather variations, with the highest vulnerability in winter and autumn season. This study therefore suggests the implementation of strategies to prioritize the traffic safety of road users during the crash-prone winter and autumn seasons. - 2019, - 2019 Informa UK Limited, trading as Taylor & Francis Group.This publication was made possible by the NPRP award [NPRP 9-360-2-150] from the Qatar National Research Fund (a member of The Qatar Foundation). The statements made herein are solely the responsibility of the authors.Scopu
Latent heat thermal storage of nano-enhanced phase change material filled by copper foam with linear porosity variation in vertical direction
Data Availability Statement: Data is contained within the article.Copyright: © 2021 by the authors. The melting flow and heat transfer of copper-oxide coconut oil in thermal energy storage filled with a nonlinear copper metal foam are addressed. The porosity of the copper foam changes linearly from bottom to top. The phase change material (PCM) is filled into the metal foam pores, which form a composite PCM. The natural convection effect is also taken into account. The effect of average porosity; porosity distribution; pore size density; the inclination angle of enclosure; and nanoparticles’ concentration on the isotherms, melting maps, and the melting rate are investigated. The results show that the average porosity is the most important parameter on the melting behavior. The variation in porosity from 0.825 to 0.9 changes the melting time by about 116%. The natural convection flows are weak in the metal foam, and hence, the impact of each of the other parameters on the melting time is insignificant (less than 5%).Funding: This research received no external funding
Recommended from our members
Effect of the quasi-petal heat transfer tube on the melting process of the nano-enhanced phase change substance in a thermal energy storage unit
Data Availability Statement: The data will be available on request.Copyright: © 2021 by the authors. The melting heat transfer of nano-enhanced phase change materials was addressed in a thermal energy storage unit. A heated U-shape tube was placed in a cylindrical shell. The cross-section of the tube is a petal-shape, which can have different amplitudes and wave numbers. The shell is filled with capric acid with a fusion temperature of 32 °C. The copper (Cu)/graphene oxide (GO) type nanoparticles were added to capric acid to improve its heat transfer properties. The enthalpy-porosity approach was used to model the phase change heat transfer in the presence of natural convection heat transfer effects. A novel mesh adaptation method was used to track the phase change melting front and produce high-quality mesh at the phase change region. The impacts of the volume fraction of nanoparticles, the amplitude and number of petals, the distance between tubes, and the angle of tube placements were investigated on the thermal energy rate and melting-time in the thermal energy storage unit. An average charging power can be raised by up to 45% by using petal shape tubes compared to a plain tube. The nanoadditives could improve the heat transfer by 7% for Cu and 11% for GO nanoparticles compared to the pure phase change material.Funding: This research received no external funding
Impact of Tube Bundle Placement on the Thermal Charging of a Latent Heat Storage Unit
The melting process of a multi-tube’s thermal energy storage system in the existence of free convection effects is a non-linear and important problem. The placement of heated tubes could change the convective thermal circulation. In the present study, the impact of the position of seven heat exchanger tubes was systematically investigated. The energy charging process was numerically studied utilizing liquid fraction and stored energy with exhaustive temperature outlines. The tubes of heat transfer fluid were presumed in the unit with different locations. The unit’s heat transfer behavior was assessed by studying the liquid fraction graphs, streamlines, and isotherm contours. Each of the design factors was divided into four levels. To better investigate the design space for the accounted five variables and four levels, an L16 orthogonal table was considered. Changing the location of tubes could change the melting rate by 28%. The best melting rate was 94% after four hours of charging. It was found that the tubes with close distance could overheat each other and reduce the total heat transfer. The study of isotherms and streamlines showed the general circulation of natural convection flows at the final stage of melting was the most crucial factor in the melting of top regions of the unit and reduces the charging time. Thus, particular attention to the tubes’ placement should be made so that the phase change material could be quickly melted at both ends of a unit.</jats:p
Effect of twisted fin array in a triple-tube latent heat storage system during the charging mode
Data Availability Statement: The data will be available on request.Copyright: © 2021 by the authors. This study aims to assess the effect of adding twisted fins in a triple-tube heat exchanger used for latent heat storage compared with using straight fins and no fins. In the proposed heat exchanger, phase change material (PCM) is placed between the middle annulus while hot water is passed in the inner tube and outer annulus in a counter-current direction, as a superior method to melt the PCM and store the thermal energy. The behavior of the system was assessed regarding the liquid fraction and temperature distributions as well as charging time and energy storage rate. The results indicate the advantages of adding twisted fins compared with those of using straight fins. The effect of several twisted fins was also studied to discover its effectiveness on the melting rate. The results demonstrate that deployment of four twisted fins reduced the melting time by 18% compared with using the same number of straight fins, and 25% compared with the no-fins case considering a similar PCM mass. Moreover, the melting time for the case of using four straight fins was 8.3% lower than that compared with the no-fins case. By raising the fins’ number from two to four and six, the heat storage rate rose 14.2% and 25.4%, respectively. This study presents the effects of novel configurations of fins in PCM-based thermal energy storage to deliver innovative products toward commercialization, which can be manufactured with additive manufacturing.Funding: This research received no external funding
Recommended from our members
Thermal charging optimization of a wavy-shaped nano-enhanced thermal storage unit
Data Availability Statement: Data is contained within the article.Copyright: © 2021 by the authors. A wavy shape was used to enhance the thermal heat transfer in a shell-tube latent heat thermal energy storage (LHTES) unit. The thermal storage unit was filled with CuO–coconut oil nano-enhanced phase change material (NePCM). The enthalpy-porosity approach was employed to model the phase change heat transfer in the presence of natural convection effects in the molten NePCM. The finite element method was applied to integrate the governing equations for fluid motion and phase change heat transfer. The impact of wave amplitude and wave number of the heated tube, as well as the volume concertation of nanoparticles on the full-charging time of the LHTES unit, was addressed. The Taguchi optimization method was used to find an optimum design of the LHTES unit. The results showed that an increase in the volume fraction of nanoparticles reduces the charging time. Moreover, the waviness of the tube resists the natural convection flow circulation in the phase change domain and could increase the charging time.Funding: This research received no external funding
Recommended from our members
Intensifying the charging response of a phase-change material with twisted fin arrays in a shell-and-tube storage system
Data Availability Statement: Data is contained within the article.Copyright: © 2021 by the authors. A twisted-fin array as an innovative structure for intensifying the charging response of a phase-change material (PCM) within a shell-and-tube storage system is introduced in this work. A three-dimensional model describing the thermal management with charging phase change process in PCM was developed and numerically analyzed by the enthalpy-porosity method using commercial CFD software. Efficacy of the proposed structure of fins for performing better heat communication between the active heating surface and the adjacent layers of PCM was verified via comparing with conventional longitudinal fins within the same design limitations of fin material and volume usage. Optimization of the fin geometric parameters including the pitch, number, thickness, and the height of the twisted fins for superior performance of the proposed fin structure, was also introduced via the Taguchi method. The results show that a faster charging rate, higher storage rate, and better uniformity in temperature distribution could be achieved in the PCMs with Twisted fins. Based on the design of twisted fins, it was found that the energy charging time could be reduced by up to 42%, and the energy storage rate could be enhanced up to 63% compared to the reference case of straight longitudinal fins within the same PCM mass limitations.Funding: This research received no external funding
Final Report: SIREV - Development of a Functional Model
Die Entwicklung eines Funktionsmodells für ein vorausschauendes Radarsystem einschließlich der Integration der Hardware in einen DLR-Hubschrauber und die Entwicklung geeigneter Algorithmen und Software für die Prozessierung wurde durchgeführt. Mit STN Atlas GmbH hat das DLR das System "Sector Imaging Radar for Enhanced Vision" (SIREV) mit IHE Karlsruhe und AeroSensing entwickelt. / Preis: 36,80
Toward an MRI-based nomogram for the prediction of transperineal prostate biopsy outcome: A physician and patient decision tool
PURPOSE: To develop and internally validate a nomogram using biparametric magnetic resonance imaging (B-MRI)-derived variables for the prediction of prostate cancer at transperineal sector-guided prostate biopsy (TPSB). SUBJECTS/PATIENTS AND METHODS: Consecutive patients referred to our institution with raised prostate-specific antigen (PSA), abnormal prostate examination, or persistent suspicion of prostate cancer after previous transrectal biopsy between July 2012 and November 2015 were reviewed from a prospective database. All patients underwent prebiopsy B-MRI with T2-weighted and diffusion-weighted imaging sequences, followed by 24 to 40 core TPSB with additional targeted cores using cognitive registration. Univariable and multivariable logistic regression analysis was used to determine predictors of prostate cancer outcomes. Multivariable coefficients were used to construct 2 MRI-based nomograms to predict any and significant (Gleason 4 or maximum cancer core length ≥6mm) prostate cancer at TPSB. Bootstrap resamples were used for internal validation. Accuracy was assessed by calculating the concordance index. RESULTS: In total, 615 men were included in the study. Prostate cancer was diagnosed in 317 (51.5%) men with significant cancer diagnosed in 237 (38.5%) men. Age, Prostate Imaging Reporting and Data System (PI-RADS) score, PSA, PSA density, and primary biopsy were predictors of prostate cancer at TPSB on univariable analysis (P<0.0001). PSA showed strong correlation with PSA density and was excluded. The remaining variables were all independent predictors of prostate cancer on multivariable analysis (P<0.0001) and used to generate the nomograms. Both nomograms showed good discrimination for prostate cancer, with a concordance index of 87% for any cancer and 92% for significant disease. Using a nomogram-derived probability threshold of<15%, 111 (18.0%) biopsies can be saved, at the expense of 3 missed significant prostate cancers. CONCLUSIONS: These internally validated MR-based nomograms were able to accurately predict TPSB outcomes for prostate cancer, especially significant disease. Our findings support the combination of prebiopsy MRI results and clinical factors as part of the biopsy decision-making process
- …