Titanium-Oxygen Reactivity Study

A program has been conducted at Astronautics to investigate the likelihood of occurrence of the catastrophic oxidation of titanium alloy sheet under conditions which simulate certain cases of accidental failure of the metal while it is in contact with liquid or gaseous oxygen. Three methods of fracturing the metal were used; they consisted of mechanical puncture, tensile fracture of welded joints, and perforation by very high velocity particles. The results of the tests which have been conducted provide further evidence of the reactivity of titanium with liquid and gaseous oxygen. The evidence indicates that the rapid fracturing of titanium sheet while it is in contact with oxygen initiates the catastrophic oxidation reaction. Initiation occurred when the speed of the fracture was some few feet per second, as in both the drop-weight puncture tests and the static tensile fracture tests of welded joints, as well as when the speed was several thousand feet per second, as in the simulated micrometeoroid penetration tests. The slow propagation of a crack, however, did not initiate the reaction. It may logically be concluded that the localized frictional heat of rapid fracture and/or spontaneous oxidation (exothermic) of minute particles emanating from the fracture cause initiation of the reaction. Under conditions of slow fracture, however, the small heat generated may be adequately dissipated and the reaction is not initiated. A portion of the study conducted consisted of investigating various means by which the reaction might be retarded or prevented. Providing a "barrier" at the titanium-oxygen interface consisting of either aluminum metal or a coating of a petroleum base corrosion inhibitor appeared to be only partially effective in retarding the reaction. The accidental puncturing or similar rupturing of thin-walled pressurized oxygen tanks on missiles and space vehicle will usually constitute loss of function, and may sometimes cause their catastrophic destruction by explosive decompression regardless of the type of material used for their construction. In the case of tanks constructed of titanium alloys the added risk is incurred of catastrophic burning of the tanks. In view of this it is recommended that thin-walled tanks constructed of titanium alloys should not be used to contain liquid or gaseous oxygen

Control of the Colorado Potato Beetle (Coleoptera: Chrysomelidae) on Tomatoes with \u3ci\u3eBacillus Thuringiensis\u3c/i\u3e Var. \u3ci\u3eThuringiensis\u3c/i\u3e

(excerpt) The Colorado potato beetle, Leptinotarsa decemlineata (Say), is a serious pest of tomatoes grown in this country. This beetle is also developing resistance to several classes of chemical insecticides including most of the carbamates, chlorinated hydrocarbons, and organophosphates (Forgash 1981). and most recently to the pyrethroids. According to figures in a report released by Schwartz and Klassen (1981). the value of the tomato crop in the CSA in 1978 was placed at $914,121,000 and crop loss due to Colorado potato beetle (CPB) damage alone would be 93% of its value if no control were undertaken. These figures along with the fact that the CPB is developing resistance dictate the need for. and development of, alternative control measures

Manganese bismuth films with narrow transfer characteristics for Curie-point switching

Manganese bismuth films having improved characteristics for recording information in analogue form, can be produced by a vacuum deposition of Bi and Mn with an atomic ratio of Mn to Bi between 2 and 3.5 or 1.4 and 1.6, followed by a specialized heat treatment which includes very brief exposure to a temperature between about 275 deg and 300 C. Similar MnBi films can be produced more reliably and reproducibly if the initial Bi layer is annealed prior to deposition of the Mn layer. Such an annealing step renders most other factors of the processing relatively non-critical. Deposition of both initial layers is preferably carried out in a vacuum approaching 10 to the -8th power Torr

Method of detecting and counting bacteria

An improved method is provided for determining bacterial levels, especially in samples of aqueous physiological fluids. The method depends on the quantitative determination of bacterial adenosine triphosphate (ATP) in the presence of nonbacterial ATP. The bacterial ATP is released by cell rupture and is measured by an enzymatic bioluminescent assay. A concentration technique is included to make the method more sensitive. It is particularly useful where the fluid to be measured contains an unknown or low bacteria count

Closed-cycle gas dynamic laser design investigation

A conceptual design study was made of a closed cycle gas-dynamic laser to provide definition of the major components in the laser loop. The system potential application is for long range power transmission by way of high power laser beams to provide satellite propulsion energy for orbit changing or station keeping. A parametric cycle optimization was conducted to establish the thermodynamic requirements for the system components. A conceptual design was conducted of the closed cycle system and the individual components to define physical characteristics and establish the system size and weight. Technology confirmation experimental demonstration programs were outlined to develop, evaluate, and demonstrate the technology base needed for this closed cycle GDL system

A stable static Universe?

Starting from the assumption that general relativity might be an emergent phenomenon showing up at low-energies from an underlying microscopic structure, we re-analyze the stability of a static closed Universe filled with radiation. In this scenario, it is sensible to consider the effective general-relativistic configuration as in a thermal contact with an "environment" (the role of environment can be played, for example, by the higher-dimensional bulk or by the trans-Planckian degrees of freedom). We calculate the free energy at a fixed temperature of this radiation-filled static configuration. Then, by looking at the free energy we show that the static Einstein configuration is stable under the stated condition.Comment: 6 pages, no figures; uses revtex4; version accepted for publication; some phrasing changed; wrong coefficient correcte

Hemodynamic studies of the legs under weightlessness

Following exposure to weightlessness, alterations in the return of blood from the legs play a crucial role in orthostatic tolerance and may be an important factor in work tolerance. To investigate some of the hemodynamic mechansism involved, an experiment was performed on the Skylab 3 and Skylab 4 missions to study arterial blood flow, venous compliance, and muscle pumping of blood. Skylab 4 results indicated that the most likely cause of increased blood flow was an increase in cardiac output secondary to increased central venous pressure caused by blood redistribution. Changes in venous compliance are thought to be primarily changes in somatic musculature which is postulated to primarily determine venous compliance of the legs. This was also thought to be demonstrated by the changes in muscle pumping. It is thought that these compliance changes, when taken with the decreased blood volume; provide a basis for the changes seen in orthostatic tolerance, work capacity and lower body negative pressure response

Thermomagnetic recording and magneto-optic playback system having constant intensity laser beam control

A system is developed for maintaining the intensity of a laser beam at a constant level in a thermomagnetic recording and magneto-optic playback system in which an isotropic film is heated along a continuous path by the laser beam for recording. As each successive area of the path is heated locally to the vicinity of its Curie point in the presence of a controlled magnetic field, a magneto-optic density is produced proportional to the amplitude of the controlled magnetic field. To play back the recorded signal, the intensity of the laser beam is reduced and a Faraday or Kerr effect analyzer is used, with a photodetector, as a transducer for producing an output signal