A laser velocimeter flow survey above a stalled wing

A laser velocimeter operating in the backscatter mode was used to survey the flow about a stalled wing installed in the Langley V/STOL tunnel. Mean velocities and magnitudes of velocity fluctuations were calculated from measurements of two orthogonal components of velocity. Free shear mixing layers above and below a large separated flow region were defined. Velocity power spectra were calculated at two points in the flow field. The flow-field survey was carried out about a rectangular aspect-ratio-8 wing with an airfoil section. The wing angle of attack was 19.4 deg, the Mach number was 0.148, and the nominal Reynolds number was 1 x 1 million

Correlation of laser velocimeter measurements over a wing with results of two prediction techniques

The flow field at the center line of an unswept wing with an aspect ratio of eight was determined using a two dimensional viscous flow prediction technique for the flow field calculation, and a three dimensional potential flow panel method to evaluate the degree of two dimensionality achieved at the wing center line. The analysis was made to provide an acceptable reference for comparison with velocity measurements obtained from a fringe type laser velocimeter optics systems operating in the backscatter mode in the Langley V/STOL tunnel. Good agreement between laser velocimeter measurements and theoretical results indicate that both methods provide a true representation of the velocity field about the wing at angles of attack of 0.6 and 4.75 deg

Epitaxial strain modulated electronic properties of interface controlled nickelate superlattice

Perovskite nickelate heterostructure consisting of single unit cell of EuNiO$_3$ and LaNiO$_3$ have been grown on a set of single crystalline substrates by pulsed laser interval deposition to investigate the effect of epitaxial strain on electronic and magnetic properties at the extreme interface limit. Despite the variation of substrate in-plane lattice constants and lattice symmetry, the structural response to heterostructuring is primarily controlled by the presence of EuNiO$_3$ layer. In sharp contrast to bulk LaNiO$_3$ or EuNiO$_3$, the superlattices grown under tensile strains exhibit metal to insulator transition (MIT) below room temperature. The onset of magnetic and electronic transitions associated with the MIT can be further separated by application of large tensile strain. Furthermore, these transitions can be entirely suppressed by very small compressive strain. X-ray resonant absorption spectroscopy measurements reveal that such strain-controlled MIT is directly linked to strain induced self-doping effect without any chemical doping.Comment: Accepted in Phys. Rev.

Epitaxial growth of (111)-oriented LaAlO3_3/LaNiO3_3 ultra-thin superlattices

The epitaxial stabilization of a single layer or superlattice structures composed of complex oxide materials on polar (111) surfaces is severely burdened by reconstructions at the interface, that commonly arise to neutralize the polarity. We report on the synthesis of high quality LaNiO$_3$/mLaAlO$_3$ pseudo cubic (111) superlattices on polar (111)-oriented LaAlO$_3$, the proposed complex oxide candidate for a topological insulating behavior. Comprehensive X-Ray diffraction measurements, RHEED, and element specific resonant X-ray absorption spectroscopy affirm their high structural and chemical quality. The study offers an opportunity to fabricate interesting interface and topology controlled (111) oriented superlattices based on ortho-nickelates