3,996 research outputs found
Competitiveness of Broiler Producers in North America Under Alternative Free Trade Scenarios
International Relations/Trade,
Spatial Equilibrium Analysis of the World Durum Industry Under Alternative Export Policies
International Relations/Trade,
United States and Canadian Free Trade Agreement: Economic Implications
International Relations/Trade,
Comparison of Material Properties and Microstructure of Specimens Built Using the 3D Systems Vanguard HS and Vanguard HiQ+HSSLS Systems
The HiQ upgrade to the 3D Systems Vanguard selective laser sintering (SLS) machine incorporates a revised thermal calibration system and new control software. The paper compares
the tensile modulus, tensile strength, elongation at break, flexural modulus, Izod impact resistance and microstructure of two batteries of standard specimens built from recycled Duraform
PA (Nylon 12). The first set is built on a Vanguard HS system and the second on the same
system with the HiQ upgrade installed. The upgrade reduces user intervention, decreases total build time and improves surface finish. However, using the default processing parameters,
tensile, flexure and impact properties are all found to decline after the upgrade is installed.Mechanical Engineerin
Spin-lattice order in frustrated ZnCr2O4
Using synchrotron X-rays and neutron diffraction we disentangle spin-lattice
order in highly frustrated ZnCrO where magnetic chromium ions occupy
the vertices of regular tetrahedra. Upon cooling below 12.5 K the quandary of
anti-aligning spins surrounding the triangular faces of tetrahedra is resolved
by establishing weak interactions on each triangle through an intricate lattice
distortion. The resulting spin order is however, not simply a N\'{e}el state on
strong bonds. A complex co-planar spin structure indicates that antisymmetric
and/or further neighbor exchange interactions also play a role as ZnCrO
resolves conflicting magnetic interactions
Evidences of a consolute critical point in the Phase Separation regime of La(5/8-y)Pr(y)Ca(3/8)MnO(3) (y = 0.4) single crystals
We report on DC and pulsed electric field sensitivity of the resistance of
mixed valent Mn oxide based La(5/8-y)Pr(y)Ca(3/8)MnO(3) (y = 0.4) single
crystals as a function of temperature. The low temperature regime of the
resistivity is highly current and voltage dependent. An irreversible transition
from high (HR) to a low resistivity (LR) is obtained upon the increase of the
electric field up to a temperature dependent critical value (V_c). The
current-voltage characteristics in the LR regime as well as the lack of a
variation in the magnetization response when V_c is reached indicate the
formation of a non-single connected filamentary conducting path. The
temperature dependence of V_c indicates the existence of a consolute point
where the conducting and insulating phases produce a critical behavior as a
consequence of their separation.Comment: 5 pages, 6 figures, corresponding author: C. Acha ([email protected]
Recommended from our members
Intumescent Flame Retardant Polyamide 11 Nanocomposites
Current polyamide 11 and 12 are lacking in fire retardancy and high strength/high heat
resistance characteristics for a plethora of fabricated parts that are desired and required
for performance driven applications. The introduction of selected nanoparticles such as
surface modified montmorillonite (MMT) clay or carbon nanofibers (CNFs), combined
with a conventional intumescent flame retardant (FR) additive into the polyamide
11/polyamide 12 (PA11/PA12) by melt processing conditions has resulted in the
preparation of a family of intumescent polyamide nanocomposites. These intumescent
polyamide 11 and 12 nanocomposites exhibit enhanced polymer performance
characteristics, i.e., fire retardancy, high strength and high heat resistance and are
expected to expand the market opportunities for polyamide 11 and polyamide 12 polymer
manufacturers.
The objective of this research is to develop improved polyamide 11 and 12 polymers with
enhanced flame retardancy, thermal, and mechanical properties for selective laser
sintering (SLS) rapid manufacturing (RM). In the present study, a nanophase was
introduced into the polyamide 11 and combining it with a conventional intumescent FR
additive via twin screw extrusion. Arkema RILSAN® polyamide 11 molding polymer
pellets were examined with two types of nanoparticles: chemically modified
montmorillonite (MMT) organoclays, and carbon nanofibers (CNFs); and Clairant’s
Exolit® OP 1230 intumescent FR additive were used to create a family of FR
intumescent polyamide 11 nanocomposites.
Transmission electron microscopy (TEM) was used to determine the degree of
nanoparticles dispersion. Injection molded specimens were fabricated for physical,
thermal, and flammability measurements. Thermal stability of these intumescent
polyamide 11 nanocomposites was examined by TGA. Flammability properties were
obtained using the Cone Calorimeter at an external heat flux of 35 kW/m
2
and UL 94
Test Method. Heat deflection temperatures (HDT) were also measured. TEM
micrographs, physical, thermal, and flammability properties are presented. FR
intumescent polyamide 11 nanocomposites properties are compared with polyamide 11
baseline polymer. Based on flammability and mechanical material performance, selective
polymers including polyamide 11 nanocomposites and control polyamide 11 will be
cryogenically ground into fine powders for SLS RM processing. SLS specimens will be
fabricated for thermal, flammability, and mechanical properties characterization.Mechanical Engineerin
Anisotropic strains and magnetoresistance of La_{0.7}Ca_{0.3}MnO_{3}
Thin films of perovskite manganite La_{0.7}Ca_{0.3}MnO_{3} were grown
epitaxially on SrTiO_3(100), MgO(100) and LaAlO_3(100) substrates by the pulsed
laser deposition method. Microscopic structures of these thin film samples as
well as a bulk sample were fully determined by x-ray diffraction measurements.
The unit cells of the three films have different shapes, i.e., contracted
tetragonal, cubic, and elongated tetragonal for SrTiO_3, MgO, and LaAlO_3
cases, respectively, while the unit cell of the bulk is cubic. It is found that
the samples with cubic unit cell show smaller peak magnetoresistance than the
noncubic ones do. The present result demonstrates that the magnetoresistance of
La_{0.7}Ca_{0.3}MnO_{3} can be controlled by lattice distortion via externally
imposed strains.Comment: Revtex, 10 pages, 2 figure
- …