The effect of silicon on the glass forming ability of the Cu47Ti34Zr11Ni8 bulk metallic glass forming alloy during processing of composites

Composites of the Cu47Ti34Zr11Ni8 bulk metallic glass, reinforced with up to 30 vol % SiC particles are synthesized and characterized. Results based on x-ray diffraction, optical microscopy, scanning Auger microscopy, and differential scanning calorimetry (DSC) are presented. During processing of the composites, a TiC layer forms around the SiC particles and Si diffuses into the Cu47Ti34Zr11Ni8 matrix stabilizing the supercooled liquid against crystallization. The small Si addition between 0.5 and 1 at. % increases the attainable maximum thickness of glassy ingots from 4 mm for Cu–Ti–Zr–Ni alloys to 7 mm for Cu–Ti–Zr–Ni–Si alloys. DSC analyses show that neither the thermodynamics nor the kinetics of the alloy are affected significantly by the Si addition. This suggests that Si enhances the glass forming ability by chemically passivating impurities such as oxygen and carbon that cause heterogeneous nucleation in the melt

Mechanical properties of Zr_(57)Nb_5Al_(10)Cu_(15.4)Ni_(12.6) metallic glass matrix particulate composites

To increase the toughness of a metallic glass with the nominal composition Zr_(57)Nb_5Al_(10)Cu_(15.4)Ni_(12.6), it was used as the matrix in particulate composites reinforced with W, WC, Ta, and SiC. The composites were tested in compression and tension experiments. Compressive strain to failure increased by more than 300% compared with the unreinforced Zr_(57)Nb_5Al_(10)Cu_(15.4)Ni_(12.6), and energy to break of the tensile samples increased by more than 50%. The increase in toughness came from the particles restricting shear band propagation, promoting the generation of multiple shear bands and additional fracture surface area. There was direct evidence of viscous flow of the metallic glass matrix within the confines of the shear bands

Impact of intrinsic biophysical diversity on the activity of spiking neurons

We study the effect of intrinsic heterogeneity on the activity of a population of leaky integrate-and-fire neurons. By rescaling the dynamical equation, we derive mathematical relations between multiple neuronal parameters and a fluctuating input noise. To this end, common input to heterogeneous neurons is conceived as an identical noise with neuron-specific mean and variance. As a consequence, the neuronal output rates can differ considerably, and their relative spike timing becomes desynchronized. This theory can quantitatively explain some recent experimental findings.Comment: 4 pages, 5 figure

Processing of carbon-fiber-reinforced Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 bulk metallic glass composites

Carbon-fiber-reinforced bulk metallic glass composites are produced by infiltrating liquid Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 into carbon fiber bundles with diameter of the individual fiber of 5 mum. Reactive wetting occurs by the formation of a ZrC layer around the fibers. This results in a composite with a homogeneous fiber distribution. The volume fraction of the fibers is about 50% and the density of the composite amounts to 4.0 g/cm(^3)

Calibration of YSZ Sensors for the Measurement of Oxygen Concentration in Liquid Pb-Bi Eutectic

Although liquid lead-bismuth eutectic (LBE) is a good candidate for coolant in the subcritical transmutation blanket, it is known to be corrosive to stainless steel, the material of the carrying tubes and containers. Such longterm corrosion problem can be prevented by producing and maintaining a protective oxide layer on the exposed surface of stainless steel. For this purpose, it is required to accurately control the concentration of oxygen dissolved in LBE. Currently, YSZ (Yttria Stabilized Zirconia) oxygen sensors, based on an existing automotive oxygen sensor, with molten bismuth saturated with oxygen as the reference, have been selected for oxygen-concentration measurement. The oxygen concentration difference across the solid electrolyte and the resultant oxygen ion conduction inside the electrolyte establishes an electromagnetic force that is used to measure the ppb level concentration of oxygen dissolved in liquid LBE. A set of calibration curves of voltage vs. temperature ranging from 300 0C to 500 0C under various oxygen concentrations in liquid LBE for the YSZ oxygen sensor has been obtained and is presented in this paper. Although the current calibration strategy using the direct injection of hydrogen and oxygen is still inadequate to determine the oxygen concentration in the system, we have found a good candidate for our purpose, which is varying hydrogen to water steam ratio in the system

Ferromagnetic Alloys in the System Cu-Mn-Zn

The purpose of this investigation is to determine whether ferromagnetic alloys exist in the ternary sys­tem Cu-Mn-Zn analogous to the other Heusler alloys. The work in this thesis is a preliminary investi­gation on these alloys using a common metallographic re­search technique and augmented with X-ray methods

Recommended Practice for Pressure Measurements and Calculation of Effective Pumping Speeds During Electric Propulsion Testing

The electric propulsion community has been implored to establish and implement a set of universally applicable test standards during the research, development, and qualification of electric propulsion systems. Variability between facility-to-facility and more importantly ground-to-flight performance can result in large margins in application or aversion to mission infusion. Performance measurements and life testing under appropriate conditions can be costly and lengthy. Measurement practices must be consistent, accurate, and repeatable. Additionally, the measurements must be universally transportable across facilities throughout the development, qualification, spacecraft integration, and on-orbit performance. A recommended practice for making pressure measurements, pressure diagnostics, and calculating effective pumping speeds with justification is presented

A comparison of emergency department utilization by elderly and younger adult patients presenting to three hospitals in Hong Kong

Background The elderly population is increasing in absolute and relative terms in most developed countries, and this is protected to have a major impact on the delivery of health care, particularly acute and emergency services. The aim of this study is to describe the pattern of utilization of emergency department (ED) services in Hong Kong by the elderly and to compare it to the utilization by younger adults. Methods Data on ED visits to three acute hospitals in the eastern New Territories were retrieved from a central computerized database of ED attendances. Data on all adult patients (aged ≥15 years) who attended the three EDs in 2006 were analyzed retrospectively. Patients aged 15 to 64 years were defined as younger adults; patients aged ≥65 years were defined as elderly. The attendance rate, ED consultation process, hospital admission rate and disease pattern of the two age groups were compared. Results Elderly patients required significantly more emergency care resources than younger adults. Elderly ED patients were brought to hospital more frequently by ambulance (42.8% vs. 14.8%, p < 0.0001) and required hospital admission more often (45.0% vs. 15.5%, p < 0.0001) than younger adults. A significantly higher proportion of elderly patients were triaged as being in the critical, emergency or urgent categories compared to younger adults (44.4% vs. 18.2%, p < 0.0001). Laboratory tests, radiography and CT scanning were performed on elderly patients more frequently than on younger adults (p < 0.0001), and their lengths of stay in EDs and emergency wards were significantly longer (p < 0.0001). Neurological symptoms and chest pain were the most common presenting symptoms in elderly ED patients. Conclusion With the foreseeable rapid growth of the elderly population, ED utilization by the elderly will increase. Health service delivery, including that in the ED, needs to take account of the specific features and requirements of the elderly population in each locale

Dynamics of sliding mechanisms in nanoscale friction

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2002.Includes bibliographical references.Nanotribology is the study of friction and wear at the nanoscale, with relevance to such applications as micromechanical systems (MEMS) and thin, hard coatings. For these systems, classical laws of friction are inappropriate due to the small dimensions of the sliding elements and the lack of excessive plastic deformation. This thesis presents a theoretical investigation of friction at the sliding interface by Molecular Dynamics (MD) simulations of ideal Lennard-Jones solids. The effect of the interfacial structure on the frictional behavior is investigated by simulating a variety of interface configurations: commensurate, noncommensurate (or grain boundary), and amorphous. The effect of adhesion on the frictional behavior is also explored through a parametric study. For the commensurate interface, the degree of adhesion determines whether sliding occurs in the frictional or "frictionless" regime; the former is distinguishable by the presence of jump phenomena, the principal mechanism of friction in the MD model. The Sigma-5 [100](310) symmetric tilt grain boundary exhibits three distinct sliding regimes which are, in the order of increasing adhesion, frictionless sliding, frictional sliding, and sliding coupled with grain boundary migration. Twist grain boundaries of the (111) plane exhibit frictionless sliding for all degrees of adhesion. Among the structures simulated, the grain boundary systems have the lowest friction due to the intrinsic misorientation at the sliding interface. In the amorphous system, sliding occurs by a series of random local slips due to the individual atomic motion associated with the disordered structure.(cont.) Increasing the adhesion leads to the initiation of a shear-induced crystallization process followed by an extremely rapid growth of the crystalline cluster. Friction in the amorphous system increases with adhesion only up to a certain limit due to the onset of bulk deformation. Similar trends have been observed in AFM measurements of the friction of thin, hard coatings.by Shon W. Yim.Ph.D