14,008 research outputs found
United States Government Publications
There has never been a time in the history of this country when
United States Government publications have been in as much demand
or were being used as extensively as they are today. The fact that requests
made to our Office show an increase of 300 per cent over those
received twenty years ago is due in an overall sense to the greater
recognition of the value which these publications have in so many of
the activities involved in working and living in the modern world. Primary
credit for this development must go, of course, to the government
agencies which are the authors of these publications of such importance
to our citizens and which cooperate with the Government
Printing Office to produce a design and format both modern and attractive.
We must not, however, overlook the increasingly fine job
being done by librarians everywhere to foster a greater awareness of
the almost limitless ways in which government publications can be
utilized. Traditionally, these publications have been regarded as a
sort of "ugly duckling" in relation to the library collection generally.
They are, however, here to stay, and while it is well that some of the
awe with which they have long been regarded is now being dispelled,
it is also necessary that certain of their specialized features should
be recognized in order that they can be utilized most effectively.published or submitted for publicatio
Dynamic mechanical analysis and organization/storage of data for polymetric materials
Dynamic mechanical analysis was performed on a variety of temperature resistant polymers and composite resin matrices. Data on glass transition temperatures and degree of cure attained were derived. In addition a laboratory based computer system was installed and data base set up to allow entry of composite data. The laboratory CPU termed TYCHO is based on a DEC PDP 11/44 CPU with a Datatrieve relational data base. The function of TYCHO is integration of chemical laboratory analytical instrumentation and storage of chemical structures for modeling of new polymeric structures and compound
Recommended from our members
Ctenosaura palearis
Number of Pages: 3Integrative BiologyGeological Science
Scanning-electron-microscope used in real-time study of friction and wear
Small friction and wear apparatus built directly into scanning-electron-microscope provides both dynamic observation and microscopic view of wear process. Friction and wear tests conducted using this system have indicated that considerable information can readily be gained
Effect of strain hardening on friction behavior of iron lubricated with benzyl structures
Sliding friction experiments were conducted with iron, copper, and aluminum in contact with iron in various states of strain. The surfaces were examined in dry sliding and with various benzyl compounds applied as lubricants. Friction experiments were conducted with a hemispherical rider contacting a flat disk at loads of from 50 to 600 grams with a sliding speed of 0.15 cm/min. Results indicate that straining increases friction for dry sliding and for surfaces lubricated with certain benzyl structures such as dibenzyl disulfide. With other benzyl compounds (e.g., benzyl formate), friction coefficients are lower for strained than for annealed iron
Friction and wear of metals in contact with pyrolytic graphite
Sliding friction experiments were conducted with gold, iron, and tantalum single crystals sliding on prismatic and basal orientations of pyrolytic graphite in various environments, including vacuum, oxygen, water vapor, nitrogen, and hydrogen bromide. Surfaces were examined in the clean state and with various adsorbates present on the graphite surfaces. Auger and LEED spectroscopy, SEM, and EDXA were used to characterize the graphite surfaces. Results indicate that the prismatic and basal orientations do not contain nor do they chemisorb oxygen, water vapor, acetylene, or hydrogen bromide. All three metals exhibited higher friction on the prismatic than on the basal orientation and these metals transferred to the atomically clean prismatic orientation of pyrolytic graphite. No metal transfer to the graphite was observed in the presence of adsorbates at 760 torr. Ion bombardment of the graphite surface with nitrogen ions resulted in the adherence of nitrogen to the surface
Dynamic SEM wear studies of tungsten carbide cermets
Dynamic friction and wear experiments were conducted in a scanning electron microscope. The wear behavior of pure tungsten carbide and composite with 6 and 15 weight percent cobalt binder was examined, and etching of the binder was done to selectively determine the role of the binder in the wear process. Dynamic experiments were conducted as the tungsten carbide (WC) and bonded WC cermet surfaces were transversed by a 50 micron radiused diamond stylus. These studies show that the predominant wear process in WC is fracture initiated by plastic deformation, and the wear of the etched cermets is similar to pure WC. The presence of the cobalt binder reduces both friction and wear. The cementing action of the cobalt reduces granular separation, and promotes a dense polished layer because of its low shear strength film-forming properties. The wear debris generated from unetched surface is approximately the same composition as the bulk
Ion plating seals microcracks or porous metal components
Description of ion plating process is given. Advantage of this process is that any plating metal or alloy can be selected, whereas, for conventional welding, material selection is limited by compatability
- …