Stochastic method for in-situ damage analysis

Based on the physics of stochastic processes we present a new approach for structural health monitoring. We show that the new method allows for an in-situ analysis of the elastic features of a mechanical structure even for realistic excitations with correlated noise as it appears in real-world situations. In particular an experimental set-up of undamaged and damaged beam structures was exposed to a noisy excitation under turbulent wind conditions. The method of reconstructing stochastic equations from measured data has been extended to realistic noisy excitations like those given here. In our analysis the deterministic part is separated from the stochastic dynamics of the system and we show that the slope of the deterministic part, which is linked to mechanical features of the material, changes sensitively with increasing damage. The results are more significant than corresponding changes in eigenfrequencies, as commonly used for structural health monitoring.Comment: This paper is accepted by European Physical Journal B on November 2. 2012. 5 pages, 5 figures, 1 tabl

Trace gas monitoring with infrared laser-based detection schemes

The success of laser-based trace gas sensing techniques crucially depends on the availability and performance of tunable laser sources combined with appropriate detection schemes. Besides near-infrared diode lasers, continuously tunable midinfrared quantum cascade lasers and nonlinear optical laser sources are preferentially employed today. Detection schemes are based on sensitive absorption measurements and comprise direct absorption in multi-pass cells as well as photoacoustic and cavity ringdown techniques in various configurations. We illustrate the performance of several systems implemented in our laboratory. These include time-resolved multicomponent traffic emission measurements with a mobile CO2-laser photoacoustic system, a diode-laser based cavity ringdown device for measurements of impurities in industrial process control, isotope ratio measurements with a difference frequency (DFG) laser source combined with balanced path length detection, detection of methylamines for breath analysis with both a near-IR diode laser and a DFG source, and finally, acetone measurements with a heatable multipass cell intended for vapor phase studies on doping agents in urine sample

Wind Energy and the Turbulent Nature of the Atmospheric Boundary Layer

Wind turbines operate in the atmospheric boundary layer, where they are exposed to the turbulent atmospheric flows. As the response time of wind turbine is typically in the range of seconds, they are affected by the small scale intermittent properties of the turbulent wind. Consequently, basic features which are known for small-scale homogeneous isotropic turbulence, and in particular the well-known intermittency problem, have an important impact on the wind energy conversion process. We report on basic research results concerning the small-scale intermittent properties of atmospheric flows and their impact on the wind energy conversion process. The analysis of wind data shows strongly intermittent statistics of wind fluctuations. To achieve numerical modeling a data-driven superposition model is proposed. For the experimental reproduction and adjustment of intermittent flows a so-called active grid setup is presented. Its ability is shown to generate reproducible properties of atmospheric flows on the smaller scales of the laboratory conditions of a wind tunnel. As an application example the response dynamics of different anemometer types are tested. To achieve a proper understanding of the impact of intermittent turbulent inflow properties on wind turbines we present methods of numerical and stochastic modeling, and compare the results to measurement data. As a summarizing result we find that atmospheric turbulence imposes its intermittent features on the complete wind energy conversion process. Intermittent turbulence features are not only present in atmospheric wind, but are also dominant in the loads on the turbine, i.e. rotor torque and thrust, and in the electrical power output signal. We conclude that profound knowledge of turbulent statistics and the application of suitable numerical as well as experimental methods are necessary to grasp these unique features (...)Comment: Accepted by the Journal of Turbulence on May 17, 201

Electronic transport in high magnetic fields of thin film MnSi

We present a study of the magnetoresistivity of thin film MnSi in high magnetic fields.Weestablish that the magnetoresistivity can be understood in terms of spin fluctuation theory, allowing us to compare our data to studies of bulk material. Despite of a close qualitative resemblance of bulk and thin film data, there are clear quantitative differences.Wepropose that these reflect a difference of the spin fluctuation spectra in thin film and bulk material MnSi, and discuss possible causes

CEDIM Risk Explorer ? a map server solution in the project "Risk Map Germany"

International audienceThe project "Risk Map Germany" at the Center for Disaster Management and Risk Reduction Technology (CEDIM) aims at visualizing hazards, vulnerabilities and risks associated with natural and man made hazards. CEDIM as an interdisciplinary project unified various expertise like earthquake, storm and flood disaster research. Our aim was to visualize the manifold data exploration in thematic maps. The implemented Web-GIS solution "CEDIM Risk Explorer" represents the map visualizations of the different risk research. This Web-GIS integrates results from interdisciplinary work as maps of hazard, vulnerability and risk in one application and offers therefore new cognitions to the user by enabling visual comparisons. The present paper starts with a project introduction and a literature review of distributed GIS environments. Further the methods of map realization and visualization in the selected technical solution is worked out. Finally, the conclusions give the perspectives for future developments to the "CEDIM Risk Explorer"

Physikalische Verfahren zur Behandlung von Saatgut im ökologischen Landbau

A variety of physical treatment methods are able to kill pathogens on and in seeds non-selectively. In all cases, the application of these methods requires optimisation of the relevant treatment parameters such as temperature, treatment time or energy dose. The optimum treatment effect is achieved when the selected parameters induce a maximum reduction of infestation without relevant impairment of germination capac-ity and plant growth. It has been confirmed that different physical measures can be used for the control of seed-borne pathogens. The “classical” hot water treatment method is suitable for a wide range of seeds. Further procedures like the hot air seed treatment method “Thermoseed®”, the vacuum-steam treatment method Steamlab, and others are also suitable

Strategien zur Bekämpfung von Streifen- und Netzfleckenkrankheit der Gerste im Ökologischen Landbau

Barley leaf stripe (Drechslera graminea) and net blotch (Drechslera teres) are important seed transmitted diseases in organic barley cultivation in Europe. In the poster different measures and agents to control both diseases are investigated and discussed. Our research reveals that barley leaf stripe as well as net blotch can be sufficiently controlled in organic farming by physical methods (warm water and hot air treatment) or by the alcoholic plant strengtheners Lebermooser and - less effectively - by Milsana®. The plant protection product Cedomon® was not always sufficiently effective to control barley leaf stripe and net blotch. Depending on the imposed measure and on the barley type (hulless, hulled), variety and seed origin more or less adverse side effects on germination were observed and should thus be considered

Strategien zur Bekämpfung von Brandkrankheiten bei Getreide im Ökologischen Landbau

Getreidebrände als saatgutübertragbare Erkrankungen der Ähre haben im Ökologischen Landbau stärkere Bedeutung erlangt, weil eine Beizung mit hochwirksamen Fungiziden unterbleibt. Eine Bekämpfung ist jedoch zwingend notwendig, weil in der Regel Ertragseinbußen eintreten und die Sporen toxikologisch bedenklich sind. Zudem droht der Saatgutvermehrung Schaden, denn bereits mehr als drei bzw. fünf befallene Pflanzen pro 150 m² führen zur Aberkennung des Basis- bzw. Z-Saatgutes. Resistente Sorten stehen kaum zur Verfügung, denn wegen der Saatbeizung bestand für die Züchtung seit Jahrzehnten keine Notwendigkeit, sich einer Resistenzzüchtung zu widmen. Das spiegelt sich auch in den Zulassungskriterien des Bundessortenamtes wider, wo die Anfälligkeit der Sorten auf Brandkrankheiten nicht berücksichtigt wird. Bei den relevanten Brandkrankheiten handelt es sich bei allen Triticum-Arten um Steinbrand (Tilletia tritici), Zwergsteinbrand (Tilletia controversa) und Flugbrand (Ustilago tritici), bei Gerste um Flugbrand (U. nuda) und Hartbrand (U. hordei) sowie bei Hafer um Flugbrand (U. avenae). Die Bekämpfung der Getreidebrände im Öko-Landbau ist spätestens seit der EU-Verordnung Nr. 1452/2003, welche die Verwendung von Saatgut aus ökologischem Anbau vorschreibt, eine vordringliche Aufgabe der Forschung. In Deutschland werden derzeit verschiedene Forschungsvorhaben zu dieser Problematik durchgeführt (Wilbois et al. 2005; Spieß 2006)