11 research outputs found
Design of Practical Superconducting DC Power Cable With REBCO Coated Conductors
critical current density of a superconductor in a parallel magnetic field. It was expected that a cable with a high current-carrying capacity could be realized with REBa2Cu3O7-σ (REBCO) coated conductors. However, the critical current density in most commercial coated conductors does not increase but slightly decreases with increasing parallel magnetic field. Nevertheless, the critical current density in the parallel magnetic field is remarkably higher than that in a normal in-plane magnetic field, and it is possible to construct a dc cable with a higher current-carrying capacity using this characteristic in comparison with conventional superconducting cables. In this paper, we propose a new design of dc power cable suitable for present commercial coated conductors. The optimal condition of the cable is discussed
Evaluation of trapped magnetic field properties in superconducting MgB2 bulk magnets by finite element method
The trapped magnetic field properties in superconducting MgB2 bulk magnets with various kinds of shape such as a disk, a ring and a pair of disks were calculated by the finite element method (FEM). For simplicity, field cool magnetization was replaced by a simple magnetization process at constant temperature to obtain equivalent distribution of magnetic field, and the thermal equation in FEM was omitted. It was confirmed that the result of FEM agreed well with the result by analytical method in infinite long cylinder. We compared the trapped magnetic field property between FEM result and experimental result in reference in order to research the simple evaluation method of the trapped magnetic field of MgB2 bulk magnet. It was found that the result of FEM agreed with the experimental result and it can explain the distribution of trapped magnetic field of superconducting MgB2 bulk magnet. From these results, it was found that it was possible to be calculated in various kinds of shape with using simple evaluation by FEM. Therefore, the optimization of the maximum trapped magnetic field in superconducting MgB2 bulk magnet can be discussed.Proceedings of the 27th International Symposium on Superconductivity (ISS 2014) November 25-27, 2014, Tokyo, Japa
Fabrication of 1 T Bi-2223 Superconducting Magnet with 92 mm Bore Diameter at 77 K
A Bi-2223 superconducting magnet for practical use in liquid nitrogen is designed and fabricated. Bi-2223 tapesprepared by ConTrolled Over Pressure (CT-OP) process are used for the winding, and the critical current at 77.3 K and self-field is in the range of 174–185 A. 28 double-pancake coils are resistively connected in series by copper terminals. Highcritical current tape is used for top and bottom double-pancake coils, since the magnetic field normal to the tape surface ishighest at the top and bottom of the magnet. Two iron plates at top and bottom of the magnet are used for reduction of thenormal component of magnetic field to the Bi-2223 tape, since the total performance of the magnet is determined by theminimum critical current at maximum normal magnetic field component to the tape. The inner bore diameter of the magnetis 92 mm. And the homogeneity of magnetic field of long-axis direction in 50 mmφ × 100 mm length is within 3%. Themaximum magnetic field at the center of the bore is over 1.0 T at 77.3 K.Proceedings of the Cryogenic Engineering Conference (2013) , June 17–21, 2013, Anchorage, Alaska, US
poST
Publisher Copyright: AuthorThis paper presents the core concepts for the poST language - a process-oriented extension of the IEC 61131-3 Structured Text (ST) language which intends to provide a conceptual consistency of the PLC source code with technological description of the plant operating procedure. The poST can be seamlessly used as a textual programming language for complex PLC software in the context of IEC 61131-3 (3rd Edition). The language combines the advantages of FSM-based programming with the conventional syntax of the ST language which would facilitate its adoption. The poST language assumes that a poST-program is a set of weakly connected concurrent processes, structurally and functionally corresponding to the technological description of the plant. Each process is specified by a sequential set of states. The states are specified by a set of the ST constructs, extended by TIMEOUT operation, SET STATE operation, and START / STOP / check state operations to communicate with other processes. The paper describes the basic syntax of the poST language, demonstrates the usage of the poST language by developing control software for an elevator, and compares the development in poST with pure Structured Text.Peer reviewe
Genetic landscape in Russian patients with familial left ventricular noncompaction
BackgroundLeft ventricular noncompaction (LVNC) cardiomyopathy is a disorder that can be complicated by heart failure, arrhythmias, thromboembolism, and sudden cardiac death. The aim of this study is to clarify the genetic landscape of LVNC in a large cohort of well-phenotyped Russian patients with LVNC, including 48 families (n=214).MethodsAll index patients underwent clinical examination and genetic analysis, as well as family members who agreed to participate in the clinical study and/or in the genetic testing. The genetic testing included next generation sequencing and genetic classification according to ACMG guidelines.ResultsA total of 55 alleles of 54 pathogenic and likely pathogenic variants in 24 genes were identified, with the largest number in the MYH7 and TTN genes. A significant proportion of variants −8 of 54 (14.8%) −have not been described earlier in other populations and may be specific to LVNC patients in Russia. In LVNC patients, the presence of each subsequent variant is associated with increased odds of having more severe LVNC subtypes than isolated LVNC with preserved ejection fraction. The corresponding odds ratio is 2.77 (1.37 −7.37; p <0.001) per variant after adjustment for sex, age, and family.ConclusionOverall, the genetic analysis of LVNC patients, accompanied by cardiomyopathy-related family history analysis, resulted in a high diagnostic yield of 89.6%. These results suggest that genetic screening should be applied to the diagnosis and prognosis of LVNC patients
AUTOMATA PROGRAMS CONSTRUCTION FROM SPECIFICATION WITH AN ANT COLONY OPTIMIZATION ALGORITHM BASED ON MUTATION GRAPH
The procedure of testing traditionally used in software engineering cannot guarantee program correctness;
therefore verification is used at the excess requirements to programs reliability. Verification makes it possible to check certain
properties of programs in all possible computational states; however, this process is very complex. In the model checking
method a model of the program is built (often, manually) and requirements in terms of temporal logic are formulated. Such
temporal properties of the model can be checked automatically. The main issue in this framework is the gap between the
program and its model. Automata-based programming paradigm gives the possibility to overcome this limitation. In this
paradigm, program logic is represented using finite-state machines. The advantage of finite-state machines is that their
models can be constructed automatically. The paper deals with the application of mutation-based ant colony optimization
algorithm to the problem of finite-state machine construction from their specification, defined by test scenarios and temporal
properties. The presented approach has been tested on the elevator doors control problem as well as on randomly generated
data. Obtained results show the ant colony algorithm is two-three times faster than the previously used genetic algorithm. The
proposed approach can be recommended for inferring control programs for critical systems
Evaluation of Trapped Magnetic Field Properties in Superconducting MgB2 Bulk Magnets by Finite Element Method
Synthesis and Electrochemical Properties of CMK-3 with Particles of Nickel, Cobalt and Copper
Методом темплатного синтеза получены мезоструктурированные углеродные материалы
СМК-3 для электродов электрохимических конденсаторов. С целью увеличения емкостных
характеристик проведено импрегнирование ионов металлов (Co, Ni и Cu) в структуру
мезопористого углерода СМК-3. Структура полученных материалов исследована методами
рентгеновской дифракции и газовой адсорбции. Исследование методом ПЭМ показало, что
высокодисперсные наноразмерные частицы металлов в образцах находятся в виде оксидов
Co, Ni и Cu, имеют размеры 30-50 нм и равномерно распределены в углеродном материале.
Электрохимические характеристики исследованы в водных электролитах (1M KCl и 1M KOH).
Установлено, что внедрение оксидов металлов приводит к увеличению удельной емкости
мезопористого углеродного материала примерно на 30 % (от 110 до 156 Ф/г) в среде KOHMesostructured carbon material CMK-3 for electrodes of electrochemical capacitors was obtained by
the method of template synthesis. In order to increase the capacitance characteristics, impregnation
of metal ions (Co, Ni, and Cu) into the structure of mesoporous carbon CMK-3 was carried out. The
structure of the obtained materials was studied by X-ray diffraction and gas adsorption. The study
by TEM showed that highly dispersed, nanosized particles are metal oxides Co, Ni and Cu with the
size of 30-50 nm. The particles are uniformly distributed inside the carbon material. Electrochemical
characteristics were studied in aqueous electrolytes (1M KCl and 1M KOH). It has been established
that the impregnation of metal ions increases in the specific capacity of the mesoporous carbon
material by about 30 % (from 110 to 156 F/g) in KO
Design of Practical Superconducting DC Power Cable With REBCO Coated Conductors
critical current density of a superconductor in a parallel magnetic field. It was expected that a cable with a high current-carrying capacity could be realized with REBa2Cu3O7-σ (REBCO) coated conductors. However, the critical current density in most commercial coated conductors does not increase but slightly decreases with increasing parallel magnetic field. Nevertheless, the critical current density in the parallel magnetic field is remarkably higher than that in a normal in-plane magnetic field, and it is possible to construct a dc cable with a higher current-carrying capacity using this characteristic in comparison with conventional superconducting cables. In this paper, we propose a new design of dc power cable suitable for present commercial coated conductors. The optimal condition of the cable is discussed