Electrochemical study of quercetin-DNA interaction: Part II

Abstract Quercetin interaction with dsDNA was investigated electrochemically using two types of DNA biosensor in order to evaluate the occurrence of DNA damage caused by oxidized quercetin. The results showed that quercetin binds to dsDNA where it can undergo oxidation. The radicals formed during quercetin oxidation cause breaks of the hydrogen bonds in the dsDNA finally giving rise to 8-oxoguanine since the DNA guanosine and adenosine nucleotides in contact with the electrode surface can easily be oxidized. A mechanism for oxidized quercetin-induced damage to dsDNA immobilized onto a glassy carbon electrode surface is proposed and the formation of 8-oxoguanine is explained. The importance of DNA-electrochemical biosensors in the determination of the interaction mechanism between DNA and quercetin is clearly demonstrated.

Immobilized Antibodies on Mercaptophenylboronic Acid Monolayers for Dual-Strategy Detection of 20S Proteasome

A dual strategy for the electrochemical detection for 20S proteasome (20S) is proposed, based on the oriented immobilization of a capture monoclonal antibody (Abβ) on a self-assembled monolayer of 4-mercaptophenylboronic acid (4-MPBA) on gold electrodes, which led to the Au/4-MPBA/Abβ immunosensor. The methodology comprises the correlation of 20S concentration with (i) its proteolytic activity toward the Z-LLE-AMC substrate, using the Au/4-MPBA/Abβ/20S, and (ii) the enzymatic activity of an alkaline phosphatase (AlkP) from the AlkP-labeled secondary antibody (Abcore-AlkP), which involves the conversion of aminophenylphosphate to the electroactive aminophenol using Au/4-MPBA/Abβ/20S/Abcore-AlkP. The step-by-step construction of the immunosensor and the interactions at its surface were evaluated by surface plasmon resonance and gravimetric analysis with quartz crystal microbalance, showing a high affinity between both antibodies and 20S. Morphological analysis by scanning electron microscopy demonstrated a pattern of parallel lines upon immobilization of Abβ on 4-MPBA and morphological changes to a well-organized granular structure upon binding of 20S. A voltametric and impedimetric characterization was performed after each step in the immunosensor construction. The two detection strategies were evaluated. It was shown that the immunosensor responds linearly with 20S concentration in the range between 5 and 100 µg mL−1, which corresponds to proteasome levels in serum in the case of diverse pathological situations, and LoD values of 1.4 and 0.2 µg mL−1 were calculated for the detection strategies. The immunosensor was applied to the detection of 20S in serum samples with recovery values ranging from 101 to 103%

Polypyrrole Actuator Based on Electrospun Microribbons

The development of soft actuators by using inexpensive raw materials and straightforward fabrication techniques, aiming at creating and developing muscle like micromanipulators, represents an important challenge nowadays. Providing such devices with biomimetic qualities, for example, sensing different external stimuli, adds even more complexity to the task. We developed electroactive polymer-coated microribbons that undergo conformational changes in response to external physical and chemical parameters. These were prepared following three simple steps. During the first step nylon-6/6 microribbons were fabricated by electrospinning. In a second step the microribbons were one side coated with a metallic layer. Finally, a conducting layer of polypyrrole was added by means of electrochemical deposition. Strips of polypyrrole-coated aligned microribbon meshes were tested as actuators responding to current, pH, and temperature. The electrochemical activity of the microstructured actuators was investigated by recording cyclic voltammograms. Chronopontentiograms for specific current, pH, and temperature values were obtained in electrolytes with different compositions. It was shown that, upon variation of the external stimulus, the actuator undergoes conformational changes due to the reduction processes of the polypyrrole layer. The ability of the actuator to hold and release thin wires, and to collect polystyrene microspheres from the bottom of the electrochemical cell, was also investigated

Polypyrrole Actuator Based on Electrospun Microribbons

The development of soft actuators by using inexpensive raw materials and straightforward fabrication techniques, aiming at creating and developing muscle like micromanipulators, represents an important challenge nowadays. Providing such devices with biomimetic qualities, for example, sensing different external stimuli, adds even more complexity to the task. We developed electroactive polymer-coated microribbons that undergo conformational changes in response to external physical and chemical parameters. These were prepared following three simple steps. During the first step nylon-6/6 microribbons were fabricated by electrospinning. In a second step the microribbons were one side coated with a metallic layer. Finally, a conducting layer of polypyrrole was added by means of electrochemical deposition. Strips of polypyrrole-coated aligned microribbon meshes were tested as actuators responding to current, pH, and temperature. The electrochemical activity of the microstructured actuators was investigated by recording cyclic voltammograms. Chronopontentiograms for specific current, pH, and temperature values were obtained in electrolytes with different compositions. It was shown that, upon variation of the external stimulus, the actuator undergoes conformational changes due to the reduction processes of the polypyrrole layer. The ability of the actuator to hold and release thin wires, and to collect polystyrene microspheres from the bottom of the electrochemical cell, was also investigated

Polypyrrole Actuator Based on Electrospun Microribbons

The development of soft actuators by using inexpensive raw materials and straightforward fabrication techniques, aiming at creating and developing muscle like micromanipulators, represents an important challenge nowadays. Providing such devices with biomimetic qualities, for example, sensing different external stimuli, adds even more complexity to the task. We developed electroactive polymer-coated microribbons that undergo conformational changes in response to external physical and chemical parameters. These were prepared following three simple steps. During the first step nylon-6/6 microribbons were fabricated by electrospinning. In a second step the microribbons were one side coated with a metallic layer. Finally, a conducting layer of polypyrrole was added by means of electrochemical deposition. Strips of polypyrrole-coated aligned microribbon meshes were tested as actuators responding to current, pH, and temperature. The electrochemical activity of the microstructured actuators was investigated by recording cyclic voltammograms. Chronopontentiograms for specific current, pH, and temperature values were obtained in electrolytes with different compositions. It was shown that, upon variation of the external stimulus, the actuator undergoes conformational changes due to the reduction processes of the polypyrrole layer. The ability of the actuator to hold and release thin wires, and to collect polystyrene microspheres from the bottom of the electrochemical cell, was also investigated

Palladium-Coated Submicron Electrospun Polymeric Fibers with Immobilized Uricase for Uric Acid Determination in Body Fluids

This work describes the development of a flexible uric acid (UA) biosensor based on palladium-coated submicrometer electrospun poly(methylmethacrylate) (PMMA) fibers metalized with gold and attached to polyethylene terephthalate substrate (Pd/Au/PMMA/PET). The morphological characterization conducted by scanning electron microscopy revealed nanoscale Pd dendritic structures. Electrochemical investigations in the absence and in the presence of redox probes demonstrated that these Pd nanostructures are responsible for a six-fold increase in the electroactive area and enhanced electron transfer kinetics when compared to the gold-coated electrospun fibers. The UA biosensor obtained by immobilizing the uricase enzyme (UrOx) onto the Pd/Au/PMMA/PET electrode surface, allowed UA detection with a sensitivity of 431 μA cm–2 mM–1 and a limit of detection of 12 μM. Investigation of the redox reactions of hydrogen peroxide (a product of the enzymatic oxidation of UA by UrOx) at the Pd/Au/PMMA/PET electrode demonstrated that the working principle of the biosensor is based on the reduction of PdO produced at the electrode surface during the spontaneous reduction of hydrogen peroxide on Pd. This allows a biosensor operating potential of −0.05 V (vs Ag/AgCl) with high selectivity. The UrOx/Pd/Au/PMMA/PET biosensor was applied for UA detection in body fluids (sweat, urine, and blood serum) with recovery values between 98 and 105%, which were validated by high-performance liquid chromatography analysis. The stability of the device was evaluated over a period of 3 months, retaining 78% of the initial sensitivity, and reproducibility with RSD = 4.9% was achieved. The analytical performance of the biosensor under harsh mechanical deformations and at physiological temperatures demonstrated the potential applications of the device to wearable sensing platforms

Carbon Inks-Based Screen-Printed Electrodes for Qualitative Analysis of Amino Acids

Due to the great significance of amino acids, a substantial number of research studies has been directed toward the development of effective and reliable platforms for their evaluation, detection, and identification. In order to support these studies, a new electrochemical platform based on PANI/ZnO nanowires’ modified carbon inks screen-printed electrodes was developed for qualitative analysis of electroactive amino acids, with emphasis on tyrosine (Tyr) and tryptophan (Trp). A comparative investigation of the carbon ink before and after modification with the PANI/ZnO was performed by scanning electron microscopy and by Raman spectroscopy, confirming the presence of PANI and ZnO nanowires. Electrochemical investigations by cyclic voltammetry and electrochemical impedance spectroscopy have shown a higher charge-transfer rate constant, which is reflected into lower charge-transfer resistance and higher capacitance values for the PANI/ZnO modified ink when compared to the simple carbon screen-printed electrode. In order to demonstrate the electrochemical performances of the PANI/ZnO nanowires’ modified carbon inks screen-printed electrodes for amino acids analysis, differential pulse voltammograms were obtained in individual and mixed solutions of electroactive amino acids. It has been shown that the PANI/ZnO nanowires’ modified carbon inks screen-printed electrodes allowed for tyrosine and tryptophan a peak separation of more than 100 mV, enabling their screening and identification in mixed solutions, which is essential for the electrochemical analysis of proteins within the proteomics research field