Influence of the annealing ambient on structural and optical properties of rare earth implanted GaN

GaN films were implanted with Er and Eu ions and rapid thermal annealing was performed at 1000, 1100 and 1200 ⁰C in vacuum, in flowing nitrogen gas or a mixture of NH₃ and N₂. Rutherford backscattering spectrometry in the channeling mode was used to study the evolution of damage introduction and recovery in the Ga sublattice and to monitor the rare earth profiles after annealing. The surface morphology of the samples was analyzed by scanning electron microscopy and the optical properties by room temperature cathodoluminescence (CL). Samples annealed in vacuum and N₂ already show the first signs of surface dissociation at 1000 ⁰C. At higher temperature, Ga droplets form, at the surface. However, samples annealed in NH₃+N₂ exhibit a very good recovery of the lattice along with a smooth surface. These samples also show the strongest CL intensity for the rare earth related emissions in the green (for Er) and red (for Eu). After annealing at 1200 ⁰C in NH₃+N₂ the Eu implanted sample reveals the channeling qualities of an unimplanted sample and a strong increase of CL intensity is observed

Optical doping of nitrides by ion implantation

A series of rare earth elements (RE) were implanted in GaN epilayers to study the lattice site location and optical activity. Rutherford backscattering spectrometry in the channeling mode(RBS/C) was used to follow the damage behavior in the Ga sublattice and the site location of the RE. For all the implanted elements (Ce, Pr, Dy, Er, and Lu) the results indicate the complete substitutionality on Ga sites after rapid thermal annealing at 1000°C for 2 min. The only exception occurs for Eu, which occupies a Ga displaced site. Annealing at 1200°C in nitrogen atmosphere at a pressure of IGPa is necessary to achieve the complete recovery of the damage in the samples. After annealing the recombination processes of the implanted samples were studied by above and below band gap excitation. For Er implanted samples besides the 1.54 μm emission green and red emissions are also observed. Red emissions from 5D0→7F2 and 3P0→3F2 transitions were found in Eu and Pr implanted samples even at room temperature

Implantation-induced amorphization of InP characterized with perturbed angular correlation

The perturbed angular correlation (PAC) technique has been used to characterize the implantation-induced crystalline-to-amorphous transformation in InP. Radioactive In-111 probes were first introduced in InP substrates which were then irradiated with Ge ions over an ion-dose range extending 2 orders of magnitude beyond that required for amorphization. Crystalline, disordered and amorphous probe environments were subsequently identified with PAC. The dose dependence of the relative fractions of the individual probe environments were determined, a direct amorphization process consistent with the overlap model was quantified and evidence for a second amorphization process via the overlap of disordered regions was observed. Given the ability to differentiate disordered and amorphous probe environments, a greater effective resolution was achieved with the PAC technique compared with other common analytical methodologies. (C) 1999 American Institute of Physics. [S0003-6951(99)02639-X]

Commissioning of the vacuum system of the KATRIN Main Spectrometer

The KATRIN experiment will probe the neutrino mass by measuring the beta-electron energy spectrum near the endpoint of tritium beta-decay. An integral energy analysis will be performed by an electro-static spectrometer (Main Spectrometer), an ultra-high vacuum vessel with a length of 23.2 m, a volume of 1240 m^3, and a complex inner electrode system with about 120000 individual parts. The strong magnetic field that guides the beta-electrons is provided by super-conducting solenoids at both ends of the spectrometer. Its influence on turbo-molecular pumps and vacuum gauges had to be considered. A system consisting of 6 turbo-molecular pumps and 3 km of non-evaporable getter strips has been deployed and was tested during the commissioning of the spectrometer. In this paper the configuration, the commissioning with bake-out at 300{\deg}C, and the performance of this system are presented in detail. The vacuum system has to maintain a pressure in the 10^{-11} mbar range. It is demonstrated that the performance of the system is already close to these stringent functional requirements for the KATRIN experiment, which will start at the end of 2016.Comment: submitted for publication in JINST, 39 pages, 15 figure

Reduction of stored-particle background by a magnetic pulse method at the KATRIN experiment

The KATRIN experiment aims to determine the effective electron neutrino mass with a sensitivity of 0.2 eV/c2 (%90 CL) by precision measurement of the shape of the tritium β-spectrum in the endpoint region. The energy analysis of the decay electrons is achieved by a MAC-E filter spectrometer. A common background source in this setup is the decay of short-lived isotopes, such as 219Rn and 220Rn, in the spectrometer volume. Active and passive countermeasures have been implemented and tested at the KATRIN main spectrometer. One of these is the magnetic pulse method, which employs the existing air coil system to reduce the magnetic guiding field in the spectrometer on a short timescale in order to remove low- and high-energy stored electrons. Here we describe the working principle of this method and present results from commissioning measurements at the main spectrometer. Simulations with the particle-tracking software Kassiopeia were carried out to gain a detailed understanding of the electron storage conditions and removal processes