268 research outputs found
Residence time distribution measurements in an external-loop airlift reactor: Study of the hydrodynamics of the liquid circulation induced by the hydrogen bubbles
A detailed study of the residence time distribution (RTD) analysis of liquid phase has been performed in an external-loop airlift reactor of 20 L nominal volume, regarded as a global unit and discriminating its different sections (riser, gas–liquid separator and downcomer) using the tracer response technique. The reactor was used as an electrochemical reactor in order to carry out the electrocoagulation/electroflotation (EC/EF). The gas phase created in the riser is the hydrogen produced by water electrolysis.In order to use this reactor for a continuous EC/EF, hydrodynamic studies were carried out to control the operating conditions and to help modelling the electrocoagulation. Current density, position of the electrodes in the riser and the volumetric liquid flow (inlet flow) are the key parameters for the hydrodynamics. The experimental results revealed that both in the downcomer and the riser–separator zones, the flow model is axial dispersion. Interesting results were obtained: –The superficial liquid velocity (ULd) at the downcomer, decreased when the volume inlet flow increased (0<QL<2 L/min). –The Peclet number obtained in the downcomer was correlated to the current density and the electrodes position. –In the riser–separator zone the Peclet number decreased with the superficial liquid velocity in the riser indicating that the dispersion increased with an increase of turbulence created in the separator by an increase of liquid velocity. –The percentage of flow that quits the reactor without reacting increased when the main flow increased and the current intensity decreased. The global RTD can be reconstituted by the signal resulting from the junction and that from riser–separator and downcomer zone by using the convolution technique. The experimental results confirm this reconstitution. The experiments confirm also that the liquid crosses the reactor without achieving loops in the case of the continuous flow
Defluoridation of drinking water by electrocoagulation/electroflotation in a stirred tank reactor with a comparative performance to an external-loop airlift reactor
Defluoridation using batch electrocoagulation/electroflotation (EC/EF) was carried out in two reactors for comparison purpose: a stirred tank reactor (STR) close to a conventional EC cell and an external-loop airlift reactor (ELAR) that was recently described as an innovative reactor for EC. The respective influences of current density, initial concentration and initial pH on the efficiency of defluoridation were investigated. The same trends were observed in both reactors, but the efficiency was higher in the STR at the beginning of the electrolysis, whereas similar values were usually achieved after 15 min operation. The influence of the initial pH was explained using the analyses of sludge composition and residual soluble aluminum species in the effluents, and it was related to the prevailing mechanisms of defluoridation. Fluoride removal and sludge reduction were both favored by an initial pH around 4, but this value required an additional pre-treatment for pH adjustment. Finally, electric energy consumption was similar in both reactors when current density was lower than 12 mA/cm2, but mixing and complete flotation of the pollutants were achieved without additional mechanical power in the ELAR, using only the overall liquid recirculation induced by H2 microbubbles generated by water electrolysis, which makes subsequent treatments easier to carry out
Kinetic study of defluoridation of drinking water by electrocoagulation/electroflotation in a stirred tank reactor and in an external-loop airlift reactor
A kinetic study of defluoridation of drinking water was carried out using the electrocoagulation/electroflotation process in two batch reactors of identical volume (20 L): a stirred tank reactor (STR) and an external-loop airlift reactor (ELALR). When the evolution of fluoride content was independent of stirring speed, experimental results showed that the kinetics of fluoride removal could be modelled using a variable-order-kinetic (VOK) approach coupled with a Langmuir–Freundlich adsorption model in the STR. Conversely, when mixing was less efficient, which is the case in the ELALR, experimental data could be fitted adequately only using a pseudo-first-order model. This constitutes however only an empirical approach based on a lumped parameter that accounts simultaneously for mass transfer, adsorption and electrochemical steps. In this case, only regression analysis could be used to establish a quantitative relationship between the kinetic constant and the operating conditions, such as current density and initial fluoride concentration
Defluoridation of Morocco drinking water by electrocoagulation/electroflottation in an electrochemical external-loop airlift reactor
An innovative application of external-loop airlift reactors as electrocoagulation/electroflotation cells with Al electrodes for defluoridation of drinking water was developed. Liquid overall recirculation and mixing were induced only by hydrogen microbubbles electrochemically generated from the cathode. This application was carried out in a 20 L external-loop air liftreactor both under semi-batch and continuous flow conditions. Results showed that liquid recirculation could be correlated to current density and gas–liquid dispersion height in the separator. Experimental data obtained at optimum conditions that favored simultaneously mixing and flotation confirmed that concentrations lower than 1.5 mg/L could be achieved when initial concentrations were between 10 and 20 mg/L. The effects of conductivity and pH agreed with the literature. Conversely, the low electrode surface vs. reactor volume ratio merged the formation of fluoroaluminum microflocs near the electrodes to fluoride adsorption on these particles in the riser and the separator sections, which differed from conventional EC cells. Consequently, defluoridation could be achieved at lower energy and electrode consumptions than in the literature. An optimum current density was defined at j = 6 mA/cm2 for pH 5, accounting simultaneously for mixing, reaction time, yield and operating costs. A promising attempt of transposition from batch to continuous process was also reported in this work, as flotation avoids the need for a downstream settling unit
Resonant metamaterial absorbers for infrared spectral filtering: quasimodal analysis, design, fabrication and characterization
We present a modal analysis of metal-insulator-metal (MIM) based
metamaterials in the far infrared region. These structures can be used as
resonant reflection bandcut spectral filters that are independent of the
polarization and direction of incidence because of the excitation of quasimodes
(modes associated with a complex frequency) leading to quasi-total absorption.
We fabricated large area samples made of chromium nanorod gratings on top of
Si/Cr layers deposited on silicon substrate and measurements by Fourier
Transform spectrophotometry show good agreement with finite element
simulations. A quasimodal expansion method is developed to obtain a reduced
order model that fits very well full wave simulations and that highlights
excitation conditions of the modes.Comment: 8 pages, 7 figure
The use of muscle strength assessed with handheld dynamometers as a non-invasive biological marker in myotonic dystrophy type 1 patients: a multicenter study
<p>Abstract</p> <p>Background</p> <p>Myotonic dystrophy type 1 (DM1) is a multisystem disorder that demonstrates variable symptoms and rates of progression. Muscle weakness is considered one of the main problems with a clinical picture that is characterized by distal weakness of the limbs progressing to proximal weakness. The main objective of this study was to characterize the maximal strength of ankle eversion and dorsiflexion in DM1 patients. Manual and handheld dynamometer (HHD) muscle testing were also compared.</p> <p>Methods</p> <p>The maximal strength of 22 patients from Quebec (mean age = 41,1 ± 13,8) and 24 from Lyon (mean age = 41,6 ± 10,2) were compared to 16 matched controls.</p> <p>Results</p> <p>With the use of HHD, an excellent reproducibility of the torque measurements was obtained for both centers in eversion (R<sup>2 </sup>= 0,94/Quebec; 0,89/Lyon) and dorsiflexion (R<sup>2 </sup>= 0,96/Quebec; 0,90/Lyon). The differences between 3 groups of DM1 (mild, moderate, severe) and between them and controls were all statistically significant (p < 0,001). No statistical differences between sites were observed (p > 0.05). The degree of muscle strength decline in dorsiflexion (eversion) were 60% (47%), 77% (71%), and 87% (83%) for DM1 with mild, moderate, and severe impairments, respectively. The smallest mean difference between all DM1 patients taking together was 2.3 Nm, a difference about twice than the standard error of measurement. There was a strong relationship between eversion and dorsiflexion strength profiles (R<sup>2 </sup>= 0,87;Quebec/0,80;Lyon). Using a 10-point scale, manual muscle testing could not discriminate between the 3 groups of DM1 patients.</p> <p>Conclusions</p> <p>The HHD protocol showed discriminative properties suitable for multicentre therapeutic trial. The present results confirmed the capacity of quantitative muscle testing to discriminate between healthy and DM1 patients with different levels of impairments. This study is a preliminary step for the implementation of a valid, reliable and responsive clinical outcome for the measurement of muscle impairments with this population.</p
Comparison of the cellular and biochemical properties of Plasmodium falciparum choline and ethanolamine kinases.
International audienceThe proliferation of the malaria-causing parasite Plasmodium falciparum within the erythrocyte is concomitant with massive phosphatidylcholine and phosphatidylethanolamine biosynthesis. Based on pharmacological and genetic data, de novo biosynthesis pathways of both phospholipids appear to be essential for parasite survival. The present study characterizes PfCK (P. falciparum choline kinase) and PfEK (P. falciparum ethanolamine kinase), which catalyse the first enzymatic steps of these essential metabolic pathways. Recombinant PfCK and PfEK were expressed as His6-tagged fusion proteins from overexpressing Escherichia coli strains, then purified to homogeneity and characterized. Using murine polyclonal antibodies against recombinant kinases, PfCK and PfEK were shown to be localized within the parasite cytoplasm. Protein expression levels increased during erythrocytic development. PfCK and PfEK appeared to be specific to their respective substrates and followed Michaelis-Menten kinetics. The Km value of PfCK for choline was 135.3+/-15.5 microM. PfCK was also able to phosphorylate ethanolamine with a very low affinity. PfEK was found to be an ethanolamine-specific kinase (Km=475.7+/-80.2 microM for ethanolamine). The quaternary ammonium compound hemicholinium-3 and an ethanolamine analogue, 2-amino-1-butanol, selectively inhibited PfCK or PfEK. In contrast, the bis-thiazolium compound T3, which was designed as a choline analogue and is currently in clinical trials for antimalarial treatment, affected PfCK and PfEK activities similarly. Inhibition exerted by T3 was competitive for both PfCK and PfEK and correlated with the impairment of cellular phosphatidylcholine biosynthesis. Comparative analyses of sequences and structures for both kinase types gave insights into their specific inhibition profiles and into the dual capacity of T3 to inhibit both PfCK and PfEK
Potent in vivo anti-malarial activity and representative snapshot pharmacokinetic evaluation of artemisinin-quinoline hybrids
BACKGROUND:Because Plasmodium falciparum displays increase tolerance against the recommended artemisinin combination therapies (ACT), new classes of anti-malarial drugs are urgently required. Previously synthesized artemisinin-aminoquinoline hybrids were evaluated to ascertain whether the potent low nanomolar in vitro anti-plasmodial activity would carry over in vivo against Plasmodium vinckei. A snapshot pharmacokinetic analysis was carried out on one of the hybrids to obtain an indication of the pharmacokinetic properties of this class of anti-malarial drugs. METHODS: In vitro activity of hybrids 2 and 3 were determined against the 3D7 strain of P. falciparum. Plasmodium vinckei-infected mice were treated with hybrids 1 - 3 for four days at a dosage of 0.8mg/kg, 2.5mg/kg, 7.5mg/kg or 15mg/kg intraperitoneally (ip), or orally (per os) with 2.7mg/kg, 8.3mg/kg, 25mg/kg or 50mg/kg. Artesunate was used as reference drug. A snapshot oral and IV pharmacokinetic study was performed on hybrid 2. RESULTS: Hybrids 1 - 3 displayed potent in vivo anti-malarial activity with ED50 of 1.1, 1.4 and <0.8mg/kg by the ip route and 12, 16 and 13mg/kg per os, respectively. Long-term monitoring of parasitaemia showed a complete cure of mice (without recrudescence) at 15mg/kg via ip route and at 50mg/kg by oral route for hybrid 1 and 2, whereas artesunate was only able to provide a complete cure at 30mg/kg ip and 80mg/kg per os. CONCLUSIONS: These compounds provide a new class of desperately needed anti-malarial drug. Despite a short half-life and moderate oral bioavailability, this class of compounds was able to cure malaria in mice at very low dosages. The optimum linker length for anti-malarial activity was found to be a diaminoalkyl chain consisting of two carbon atoms either methylated or unmethylated
Prognostic value of right ventricular dilatation on computed tomography pulmonary angiogram for predicting adverse clinical events in severe COVID-19 pneumonia
BackgroundRight ventricle dilatation (RVD) is a common complication of non-intubated COVID-19 pneumonia caused by pro-thrombotic pneumonitis, intra-pulmonary shunting, and pulmonary vascular dysfunction. In several pulmonary diseases, RVD is routinely measured on computed tomography pulmonary angiogram (CTPA) by the right ventricle-to-left ventricle (LV) diameter ratio > 1 for predicting adverse events.ObjectiveThe aim of the study was to evaluate the association between RVD and the occurrence of adverse events in a cohort of critically ill non-intubated COVID-19 patients.MethodsBetween February 2020 and February 2022, non-intubated patients admitted to the Amiens University Hospital intensive care unit for COVID-19 pneumonia with CTPA performed within 48 h of admission were included. RVD was defined by an RV/LV diameter ratio greater than one measured on CTPA. The primary outcome was the occurrence of an adverse event (renal replacement therapy, extracorporeal membrane oxygenation, 30-day mortality after ICU admission).ResultsAmong 181 patients, 62% (n = 112/181) presented RVD. The RV/LV ratio was 1.10 [1.05–1.18] in the RVD group and 0.88 [0.84–0.96] in the non-RVD group (p = 0.001). Adverse clinical events were 30% and identical in the two groups (p = 0.73). In Receiving operative curves (ROC) analysis, the RV/LV ratio measurement failed to identify patients with adverse events. On multivariable Cox analysis, RVD was not associated with adverse events to the contrary to chest tomography severity score > 10 (hazards ratio = 1.70, 95% CI [1.03–2.94]; p = 0.04) and cardiovascular component (> 2) of the SOFA score (HR = 2.93, 95% CI [1.44–5.95], p = 0.003).ConclusionRight ventricle (RV) dilatation assessed by RV/LV ratio was a common CTPA finding in non-intubated critical patients with COVID-19 pneumonia and was not associated with the occurrence of clinical adverse events
- …