MISAT: Designing a Series of Powerful Small Satellites Based upon Micro Systems Technology

MISAT is a research and development cluster which will create a small satellite platform based on Micro Systems Technology (MST) aiming at innovative space as well as terrestrial applications. MISAT is part of the Dutch MicroNed program which has established a microsystems infrastructure to fully exploit the MST knowledge chain involving public and industrial partners alike. The cluster covers MST-related developments for the spacecraft bus and payload, as well as the satellite architecture. Particular emphasis is given to distributed systems in space to fully exploit the potential of miniaturization for future mission concepts. Examples of current developments are wireless sensor and actuator networks with plug and play characteristics, autonomous digital Sun sensors, re-configurable radio front ends with minimum power consumption, or micro-machined electrostatic accelerometer and gradiometer system for scientific research in fundamental physics as well as geophysics. As a result of MISAT, a first nano-satellite will be launched in 2007 to demonstrate the next generation of Sun sensors, power subsystems and satellite architecture technology. Rapid access to in-orbit technology demonstration and verification will be provided by a series of small satellites. This will include a formation flying mission, which will increasingly rely on MISAT technology to improve functionality and reduce size, mass and power for advanced technology demonstration and novel scientific applications.

High quality ultrafast transmission electron microscopy using resonant microwave cavities

Ultrashort, low-emittance electron pulses can be created at a high repetition rate by using a TM$_{110}$ deflection cavity to sweep a continuous beam across an aperture. These pulses can be used for time-resolved electron microscopy with atomic spatial and temporal resolution at relatively large average currents. In order to demonstrate this, a cavity has been inserted in a transmission electron microscope, and picosecond pulses have been created. No significant increase of either emittance or energy spread has been measured for these pulses. At a peak current of $814\pm2$ pA, the root-mean-square transverse normalized emittance of the electron pulses is $\varepsilon_{n,x}=(2.7\pm0.1)\cdot 10^{-12}$ m rad in the direction parallel to the streak of the cavity, and $\varepsilon_{n,y}=(2.5\pm0.1)\cdot 10^{-12}$ m rad in the perpendicular direction for pulses with a pulse length of 1.1-1.3 ps. Under the same conditions, the emittance of the continuous beam is $\varepsilon_{n,x}=\varepsilon_{n,y}=(2.5\pm0.1)\cdot 10^{-12}$ m rad. Furthermore, for both the pulsed and the continuous beam a full width at half maximum energy spread of $0.95\pm0.05$ eV has been measured

Loss mechanisms of surface plasmon polaritons on gold probed by cathodoluminescence imaging spectroscopy

We use cathodoluminescence imaging spectroscopy to excite surface plasmon polaritons and measure their decay length on single crystal and polycrystalline gold surfaces. The surface plasmon polaritons are excited on the gold surface by a nanoscale focused electron beam and are coupled into free space radiation by gratings fabricated into the surface. By scanning the electron beam on a line perpendicular to the gratings, the propagation length is determined. Data for single-crystal gold are in agreement with calculations based on dielectric constants. For polycrystalline films, grain boundary scattering is identified as additional loss mechanism, with a scattering coefficient SG=0.2%

Design and characterization of dielectric filled TM110_{110} microwave cavities for ultrafast electron microscopy

Microwave cavities oscillating in the TM$_{110}$ mode can be used as dynamic electron-optical elements inside an electron microscope. By filling the cavity with a dielectric material it becomes more compact and power efficient, facilitating the implementation in an electron microscope. However, the incorporation of the dielectric material makes the manufacturing process more difficult. Presented here are the steps taken to characterize the dielectric material, and to reproducibly fabricate dielectric filled cavities. Also presented are two versions with improved capabilities. The first, called a dual-mode cavity, is designed to support two modes simultaneously. The second has been optimized for low power consumption. With this optimized cavity a magnetic field strength of 2.84 $\pm$ 0.07 mT was generated at an input power of 14.2 $\pm$ 0.2 W. Due to the low input powers and small dimensions, these dielectric cavities are ideal as electron-optical elements for electron microscopy setups

Theory and particle tracking simulations of a resonant radiofrequency deflection cavity in TM110_{110} mode for ultrafast electron microscopy

We present a theoretical description of resonant radiofrequency (RF) deflecting cavities in TM$_{110}$ mode as dynamic optical elements for ultrafast electron microscopy. We first derive the optical transfer matrix of an ideal pillbox cavity and use a Courant-Snyder formalism to calculate the 6D phase space propagation of a Gaussian electron distribution through the cavity. We derive closed, analytic expressions for the increase in transverse emittance and energy spread of the electron distribution. We demonstrate that for the special case of a beam focused in the center of the cavity, the low emittance and low energy spread of a high quality beam can be maintained, which allows high-repetition rate, ultrafast electron microscopy with 100 fs temporal resolution combined with the atomic resolution of a high-end TEM. This is confirmed by charged particle tracking simulations using a realistic cavity geometry, including fringe fields at the cavity entrance and exit apertures

Practical points of attention beyond instructions for use with the Zenith fenestrated stent graft.

Fenestrated stent grafting for endovascular repair (F-EVAR) aims to treat patients with abdominal aortic aneurysms that are unsuitable for standard EVAR because of a short or absent infrarenal neck. F-EVAR has been used initially in patients with higher surgical risk with pararenal abdominal aortic aneurysms, but F-EVAR is now increasingly considered a treatment alternative to open surgery in anatomically suitable patients. F-EVAR has benefitted from ongoing technical refinements and accumulating clinical experience but remains a relatively complex procedure. Correct indication, accurate preoperative planning, and meticulous execution are the key to long-term success. Considering the growing interest in F-EVAR worldwide, including the United States, we discuss current indications and provide advice for planning and technical execution on the basis of the senior authors' 13 years of experience

The resistivity and microstructure of heavily drawn Cu‐Nb alloys

A combined resistivitytransmission electron microscopy(TEM) study has been done on heavily drawn Cu‐20 vol % Nb alloys (so‐called i n s i t u alloys). The results show that electron scattering at Cu‐Nb interfaces makes the major contribution to resistivity in heavily drawn wire. The dislocation contribution is small and constant at deformation strains greater than around 4, apparently as a result of dynamic recovery/recrystallization of the Cu matrix which occurs during room‐temperature drawing. Results of this study and other recent TEM dislocation studies indicate that the dislocation density in heavily drawn Cu‐20 vol % Nb material does not exceed 101 1 cm− 2. It is demonstrated here that the 101 3‐ cm− 2 dislocation density predicted by the resistivity study of Karasek and Bevk [J. Appl. Phys. 5 2, 1370 (1981)] is high because the interface scattering contribution is more strongly reduced by coarsening than they assumed. It is shown that resistivitymeasurements provide a means of evaluating an average Cu channel diameter in the aligned composite alloys formed at large deformation strains

Increasing survival gap between young and elderly gastric cancer patients

INTRODUCTION: This study investigates the treatment and survival of young versus elderly potentially curable gastric cancer patients in the Netherlands. PATIENTS AND METHODS: All noncardia gastric cancer patients with potentially curable gastric cancer according to stage (cTx-3, cNx-3, and cMx-0) diagnosed between 1989 and 2013 were selected from the Netherlands Cancer Registry. Trends in treatment and overall survival were compared between young patients (younger than 70 years) and elderly patients (70 years or older). Multivariable logistic regression analysis was used to examine the probability of patients undergoing surgery and chemotherapy in the most recent period. Multivariable Cox regression analysis was used to identify independent factors associated with survival. RESULTS: In total, 8107 young and 13,814 elderly gastric cancer patients were included. There was a major increase in the proportion of patients treated with resection and chemotherapy after 2004-2008. In young patients the increase was from 2.6% in 1999-2003 to 63% in 2009-2013 (p < 0.01). Also an increase was noticed among elderly patients, from 0.1% to 16% (p < 0.01). Median survival increased from 2004 to 2008 onward particularly in young patients and to a lesser extent in elderly patients (from 28 to 41 months vs from 11 to 13 months). Multivariable Cox regression analyses confirmed that overall survival improved for young and elderly patients. DISCUSSION: Young patients experienced a stronger improvement in survival than elderly patients, resulting in an increasing survival gap. The literature shows this is a problem not only in the Netherlands but also throughout Europe. The dissimilarity in treatment between young and elderly patients could be the reason for this difference

Materials science experiments in space

The criteria for the selection of the experimental areas and individual experiments were that the experiment or area must make a meaningful contribution to the field of material science and that the space environment was either an absolute requirement for the successful execution of the experiment or that the experiment can be more economically or more conveniently performed in space. A number of experimental areas and individual experiments were recommended for further consideration as space experiments. Areas not considered to be fruitful and others needing additional analysis in order to determine their suitability for conduct in space are also listed. Recommendations were made concerning the manner in which these materials science experiments are carried out and the related studies that should be pursued