222 research outputs found
On hawser force criteria for navigation lock design: Case study of maritime locks in port of Antwerp
The first part of this paper offers a general reflection upon the issue of mooring line forces and ship behaviour during filling/emptying of (maritime) navigation locks. The philosophy behind the so-called hawser force criterion and the classical approach to deal with it in design studies, is described first. Secondly, some innovations in the definition, verification and validation of the design criteria are highlighted. In the second part of this paper, a case study is presented focusing on two maritime locks in the Port of Antwerp (Belgium): the Zandvliet lock (L x W = 500m x 57m) and the Berendrecht lock (L x W = 500m x 68m). To illustrate and comment upon the hawser force issues, results of scale modelling, in situ measurements and numerical modelling are discussed, in comparison to published hawser force criteria
Practical implementation, characterization and applications of a multi-colour time-gated luminescence microscope
Time-gated luminescence microscopy using long-lifetime molecular probes can effectively eliminate autofluorescence to enable high contrast imaging. Here we investigate a new strategy of time-gated imaging for simultaneous visualisation of multiple species of microorganisms stained with long-lived complexes under low-background conditions. This is realized by imaging two pathogenic organisms (Giardia lamblia stained with a red europium probe and Cryptosporidium parvum with a green terbium probe) at UV wavelengths (320-400 nm) through synchronization of a flash lamp with high repetition rate (1 kHz) to a robust time-gating detection unit. This approach provides four times enhancement in signal-to-background ratio over non-time-gated imaging, while the average signal intensity also increases six-fold compared with that under UV LED excitation. The high sensitivity is further confirmed by imaging the single europium-doped Y2O2S nanocrystals (150 nm). We report technical details regarding the time-gating detection unit and demonstrate its compatibility with commercial epi-fluorescence microscopes, providing a valuable and convenient addition to standard laboratory equipment
Heat Treated NiPâSiC Composite Coatings: Elaboration and Tribocorrosion Behaviour in NaCl Solution
Tribocorrosion behaviour of heat-treated NiP and NiPâSiC composite coatings was investigated in a 0.6 M NaCl solution. The tribocorrosion tests were performed in a linear sliding tribometer with an electrochemical cell interface. It was analyzed the influence of SiC particles dispersion in the NiP matrix on current density developed, on coefficient of friction and on wear volume loss. The results showed that NiPâSiC composite coatings had a lower wear volume loss compared to NiP coatings. However, the incorporation of SiC particles into the metallic matrix affects the current density developed by the system during the tribocorrosion test. It was verified that not only the volume of co-deposited particles (SiC vol.%) but also the number of SiC particles per coating area unit (and consequently the SiC particles size) have made influence on the tribocorrosion behaviour of NiPâSiC composite coatings
Magnetic and thermal properties of 4f-3d ladder-type molecular compounds
We report on the low-temperature magnetic susceptibilities and specific heats
of the isostructural spin-ladder molecular complexes L[M(opba)]_{3\cdot
xDMSOHO, hereafter abbreviated with LM (where L =
La, Gd, Tb, Dy, Ho and M = Cu, Zn). The results show that the Cu containing
complexes (with the exception of LaCu) undergo long range magnetic
order at temperatures below 2 K, and that for GdCu this ordering is
ferromagnetic, whereas for TbCu and DyCu it is probably
antiferromagnetic. The susceptibilities and specific heats of TbCu
and DyCu above have been explained by means of a model
taking into account nearest as well as next-nearest neighbor magnetic
interactions. We show that the intraladder L--Cu interaction is the predominant
one and that it is ferromagnetic for L = Gd, Tb and Dy. For the cases of Tb, Dy
and Ho containing complexes, strong crystal field effects on the magnetic and
thermal properties have to be taken into account. The magnetic coupling between
the (ferromagnetic) ladders is found to be very weak and is probably of dipolar
origin.Comment: 13 pages, 15 figures, submitted to Phys. Rev.
Review of health-related quality of life data in multiple myeloma patients treated with novel agents
In multiple myeloma (MM), health-related quality of life (HRQoL) data is becoming increasingly important, owing to improved survival outcomes and the impact of treatment-related toxicity on HRQoL. Researchers are more frequently including HRQoL assessments in clinical trials, but analysis and reporting of this data has not been consistent. A systematic literature review assessed the effect of novel agents (thalidomide, bortezomib and lenalidomide) on HRQoL in MM patients, and evaluated the subsequent reporting of these HRQoL results. A relatively small body of literature addresses HRQoL data in MM patients treated with novel MM therapeutic agents: 9 manuscripts and 15 conference proceedings. The literature demonstrates the complementary value of HRQoL when assessing clinical response, progression, overall survival and toxicity. However, weaknesses and inconsistencies in analysis and presentation of HRQoL data were observed, often complicating interpretation of the impact of treatment on HRQoL in MM. Further evaluation of HRQoL in MM patients treated with novel agents is required in larger cohorts, and ideally in head-to-head comparative studies. Additionally, the development of standardised MM-specific best practice guidelines in HRQoL data collection and analysis is recommended. These would ensure that future data are more useful in guiding predictive models and clinical decisions
- âŠ