Ni-Based Catalysts for the Hydrotreatment of Fast Pyrolysis Oil

Catalytic hydrotreatment is an attractive technology to convert fast pyrolysis oil to stabilized oil products for co processing in conventional crude oil refinery units. We report here the use of novel bimetallic NiCu- and NiPd-based (Picula) catalysts characterized by a high Ni content (29-58 wt %) and prepared using a sol gel method with SiO2, La2O3, kaolin, ZrO2, and combinations thereof as the support, for the catalytic hydrotreatment of fast pyrolysis oil. The experiments were performed in a batch autoclave (1 h at 150 degrees C, 3 h at 350 degrees C, and 200 bar initial pressure at 350 degrees C). The catalyst with the highest nickel loading (58 wt % Ni) promoted with Pd (0.7 wt %) was the most active, yielding oil products with improved properties compared to the crude pyrolysis oil (lower oxygen content, higher solubility in hydrocarbons, and less tendency for coke formation). For all Picula catalysts, except the ZrO2-based catalysts, methane formation was considerably lower than for Ru/C, the benchmark catalyst in catalytic hydrotreatment of fast pyrolysis oil. To anticipate possible catalyst deactivation at very long times on stream, catalyst regeneration studies were performed using thermogravimetric analysis. Analyses of the regenerated catalysts (X-ray diffraction, high-resolution transmission electron microscopy, and Brunauer Emmett Teller surface area) showed the occurrence of active metal agglomeration.</p

Catalytic Hydrotreatment of the Pyrolytic Sugar and Pyrolytic Lignin Fractions of Fast Pyrolysis Liquids Using Nickel Based Catalysts

Catalytic hydrotreatment is recognized as an efficient method to improve the properties of pyrolysis liquids (PO) to allow co-feeding with fossil fuels in conventional refinery units. The promising catalyst recipes identified so far are catalysts with high nickel contents (38 to 57 wt.%), promoted by Cu, Pd, Mo and/or a combination, and supported by SiO2, SiO2-ZrO2, SiO2-ZrO2-La2O3 or SiO2-Al2O3. To gain insights into the reactivity of the pyrolytic sugar (PS) and pyrolytic lignin (PL) fraction of PO, hydrotreatment studies (350 °C, 120 bar H2 pressure (RT) for 4 h) were performed in a batch autoclave. Catalyst performance was evaluated by considering the product properties (H/C ratio, the charring tendency (TGA) and molecular weight distribution (GPC)) and the results were compared with a benchmark Ru/C catalyst. All Ni based catalysts gave products oils with a higher H/C compared to Ru/C. The Mo promoted catalyst performed best, giving a product with the highest H/C ratio (1.54) and the lowest TG residue (0.8 wt.% compared to 12 wt.% for the fresh PS). The results further revealed that the PS fraction is highly reactive and full conversion was achieved at 350 °C. In contrast, the PL fraction was rather inert, and only part of the PL fraction was converted. The fresh and spent catalysts after the hydrotreatment of the PS and PL fractions were characterized by elemental analysis, powder X-Ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM-EDX). The results revealed that the use of PS as the feed leads to higher amounts of coke deposits on the catalysts, and higher levels of Ni agglomeration when compared to experiments with PL and pure PO. This proofs that proper catalyst selection for the PS fraction is of higher importance than for the PL fraction. The Mo promoted Ni catalysts showed the lowest amount of coke and the lowest tendency for Ni nanoparticle agglomeration compared to the monometallic Ni and bimetallic Ni-Cu catalysts

Catalytic hydrotreatment of fast pyrolysis liquids in batch and continuous set-ups using a bimetallic Ni-Cu catalyst with a high metal content

In this paper, an experimental study on the hydrotreatment of fast pyrolysis liquids is reported in both batch and continuous set-ups using a novel bimetallic Ni-Cu based catalyst with high Ni loading (up to 50%) prepared by a sol-gel method. The experiments were carried out in a wide temperature range (80-410 degrees C) and at a hydrogen pressure between 100-200 bar to determine product properties and catalyst performance as a function of process conditions. To gain insight into the molecular transformations, the product oils were analysed by GC x GC, H-1-NMR and GPC and reveal that the sugar fraction is reactive in the low temperature range (300 degrees C). In addition, the organic acids are very persistent and reactivity was only observed above 350 degrees C. The results are rationalized using a reaction network involving competitive hydrogenation of reactive aldehydes and ketones of the sugar fraction of fast pyrolysis liquids and thermal polymerisation. In addition, relevant macro-properties of the product oils including flash point (30 to 80 degrees C), viscosity (0.06 to 0.93 Pa s) and TG residue

Mono-, bi-, and tri-metallic Ni-based catalysts for the catalytic hydrotreatment of pyrolysis liquids

Catalytic hydrotreatment is a promising technology to convert pyrolysis liquids into intermediates with improved properties. Here, we report a catalyst screening study on the catalytic hydrotreatment of pyrolysis liquids using bi- and tri-metallic nickel-based catalysts in a batch autoclave (initial hydrogen pressure of 140 bar, 350 A degrees C, 4 h). The catalysts are characterized by a high nickel metal loading (41 to 57 wt%), promoted by Cu, Pd, Mo, and/or combination thereof, in a SiO2, SiO2-ZrO2, or SiO2-Al2O3 matrix. The hydrotreatment results were compared with a benchmark Ru/C catalyst. The results revealed that the monometallic Ni catalyst is the least active and that particularly the use of Mo as the promoter is favored when considering activity and product properties. For Mo promotion, a product oil with improved properties viz. the highest H/C molar ratio and the lowest coking tendency was obtained. A drawback when using Mo as the promoter is the relatively high methane yield, which is close to that for Ru/C. H-1, C-13-NMR, heteronuclear single quantum coherence (HSQC), and two-dimensional gas chromatography (GC x GC) of the product oils reveal that representative component classes of the sugar fraction of pyrolysis liquids like carbonyl compounds (aldehydes and ketones and carbohydrates) are converted to a large extent. The pyrolytic lignin fraction is less reactive, though some degree of hydrocracking is observed

Quantum photo-thermodynamics on a programmable photonic quantum processor

One of the core questions of quantum physics is how to reconcile the unitary evolution of quantum states, which is information-preserving and time-reversible, with the second law of thermodynamics, which is neither. The resolution to this paradox is to recognize that global unitary evolution of a multi-partite quantum state causes the state of local subsystems to evolve towards maximum-entropy states. In this work, we experimentally demonstrate this effect in linear quantum optics by simultaneously showing the convergence of local quantum states to a generalized Gibbs ensemble constituting a maximum-entropy state under precisely controlled conditions, while using a new, efficient certification method to demonstrate that the state retains global purity. Our quantum states are manipulated by a programmable integrated photonic quantum processor, which simulates arbitrary non-interacting Hamiltonians, demonstrating the universality of this phenomenon. Our results show the potential of photonic devices for quantum simulations involving non-Gaussian states

Hydrotreatment of the carbohydrate-rich fraction of pyrolysis liquids using bimetallic Ni based catalyst:Catalyst activity and product property relations

The use of novel nickel based catalysts for the catalytic hydrotreatment of pyrolytic sugars, the carbohydrate rich fraction of pine derived pyrolysis liquids, is reported. The catalysts are characterized by a high nickel loading (38 to 57 wt%), promoted by Cu, Pd, and/or Mo and a SiO2 based inorganic matrix. Experiments were carried out at 180 degrees C and 120 bar initial hydrogen pressure (room temperature) in a batch reactor set-up to gain insight in catalyst activity and product properties as a function of the catalyst composition. The most promising catalyst in terms of activity, as measured by the hydrogen uptake during reaction, was the Ni-Mo/SiO2-Al2O3 catalyst whereas the performance of the monometallic Ni/SiO2-Al2O3 catalyst was the lowest. As a result, the product oil obtained by the bimetallic Ni-Mo catalyst showed the highest H/C ratio and the lowest molecular weight of all catalysts tested. A detailed catalyst characterization study revealed that addition of Mo to the Ni catalyst suppresses the agglomeration of nickel nanoparticles during the catalytic hydrotreatment reaction

Sex differences in the timing of identification among children and adults with autism spectrum disorders

To examine differences by sex in the timing of identification of individuals with autism spectrum disorders (ASD), survey data were collected in the Netherlands from 2,275 males and females with autistic disorder, Asperger's syndrome and PDD-NOS. Among participants <18 years of age, females with Asperger's syndrome were identified later than males. Among participants ≥18 years of age, females with autistic disorder were identified later than males. In more recent years, girls with Asperger's syndrome are diagnosed later than boys, confirming earlier findings. In adults, the delayed timing of diagnosis in females with autistic disorder may be related to changing practices in diagnosis over time. Strategies for changing clinician behaviour to improve recognition of ASD in females are needed. © 2012 Springer Science+Business Media, LLC

Mono-, bi-, and tri-metallic Ni-based catalysts for the catalytic hydrotreatment of pyrolysis liquids

Catalytic hydrotreatment is a promising technology to convert pyrolysis liquids into intermediates with improved properties. Here, we report a catalyst screening study on the catalytic hydrotreatment of pyrolysis liquids using bi- and tri-metallic nickel-based catalysts in a batch autoclave (initial hydrogen pressure of 140 bar, 350 A degrees C, 4 h). The catalysts are characterized by a high nickel metal loading (41 to 57 wt%), promoted by Cu, Pd, Mo, and/or combination thereof, in a SiO2, SiO2-ZrO2, or SiO2-Al2O3 matrix. The hydrotreatment results were compared with a benchmark Ru/C catalyst. The results revealed that the monometallic Ni catalyst is the least active and that particularly the use of Mo as the promoter is favored when considering activity and product properties. For Mo promotion, a product oil with improved properties viz. the highest H/C molar ratio and the lowest coking tendency was obtained. A drawback when using Mo as the promoter is the relatively high methane yield, which is close to that for Ru/C. H-1, C-13-NMR, heteronuclear single quantum coherence (HSQC), and two-dimensional gas chromatography (GC x GC) of the product oils reveal that representative component classes of the sugar fraction of pyrolysis liquids like carbonyl compounds (aldehydes and ketones and carbohydrates) are converted to a large extent. The pyrolytic lignin fraction is less reactive, though some degree of hydrocracking is observed