Development of autoclavable addition type polyimides

Two highly promising approaches to yield autoclavable addition-type polyimides were identified and evaluated in the program. Conditions were established for autoclave preparation of Hercules HMS graphite fiber reinforced composites in the temperature range of 473 K to 505 K under an applied pressure of 0.7 MN/m2 (100 psi) for time durations up to four hours. Upon oven postcure in air at 589 K, composite samples demonstrated high mechanical property retention at 561 K after isothermal aging in air for 1000 hours. Promise was shown for shorter term mechanical property retention at 589 K upon exposure in air at this temperature

Development of autoclavable polyimides

A poly(Diels-Alder) (PDA) resin approach was investigated as a means to achieve autoclavability of high temperature resistant resin/fiber composites under mild fabrication procedures. Low void content Type A-S graphite reinforced composites were autoclave fabricated from a PDA resin/fiber prepared from an acetone:methanol:dioxane varnish. Autoclave conditions were 477K (400F) and 0.7 MN/sq m (100 psi) for up to two hours duration. After postcure at temperatures up to 589K (600F), the composites demonstrated high initial mechanical properties at temperatures up to 561K (550F). The results from isothermal aging studies in air for 1000 hours indicated potential for long-term ( 1000 hours) use at 533K (500F) and shorter-term (up to 1000 hours) at 561K (550F)

Development of autoclave moldable addition-type polyimides

Chemistry and processing modifications of the poly(Diels Alder) polyimide (PDA) resin were performed to obtain structural composites suitable for 589 K (600 F) service. This work demonstrated that the PDA resin formulation is suitable for service at 589 K (600 F) for up to 125 hours when used in combination with Hercules HTS graphite fiber. Sandwich panels were autoclave molded using PDA/HTS skins and polyimide/glass honeycomb core. Excellent adhesion between honeycomb core and the facing skins was demonstrated. Fabrication ease was demonstrated by autoclave molding three-quarter scale YF-12 wing panels

Development of a high-altitude airborne dial system: The Lidar Atmospheric Sensing Experiment (LASE)

The ability of a Differential Absorption Lidar (DIAL) system to measure vertical profiles of H2O in the lower atmosphere was demonstrated both in ground-based and airborne experiments. In these experiments, tunable lasers were used that required real-time experimenter control to locate and lock onto the atmospheric H2O absorption line for the DIAL measurements. The Lidar Atmospheric Sensing Experiment (LASE) is the first step in a long-range effort to develop and demonstrate an autonomous DIAL system for airborne and spaceborne flight experiments. The LASE instrument is being developed to measure H2O, aerosol, and cloud profiles from a high-altitude ER-2 (extended range U-2) aircraft. The science of the LASE program, the LASE system design, and the expected measurement capability of the system are discussed

Performance Evaluation and Optimization of Math-Similarity Search

Similarity search in math is to find mathematical expressions that are similar to a user's query. We conceptualized the similarity factors between mathematical expressions, and proposed an approach to math similarity search (MSS) by defining metrics based on those similarity factors [11]. Our preliminary implementation indicated the advantage of MSS compared to non-similarity based search. In order to more effectively and efficiently search similar math expressions, MSS is further optimized. This paper focuses on performance evaluation and optimization of MSS. Our results show that the proposed optimization process significantly improved the performance of MSS with respect to both relevance ranking and recall.Comment: 15 pages, 8 figure

Kilohertz Quasi-Periodic Oscillation Peak Separation is not Constant in the Atoll Source 4U 1608-52

We present new Rossi X-ray Timing Explorer observations of the low-mass X-ray binary 4U 1608-52 during the decay of its 1998 outburst. We detect by a direct FFT method the existence of a second kilohertz quasi-periodic oscillation (kHz QPO) in its power density spectrum, previously only seen by means of the sensitivity-enhancing `shift and add' technique. This result confirms that 4U 1608-52 is a twin kHz QPO source. The frequency separation between these two QPO decreased significantly, from 325.5 +/- 3.4 Hz to 225.3 +/- 12.0 Hz, as the frequency of the lower kHz QPO increased from 470 Hz to 865 Hz, in contradiction with a simple beat-frequency interpretation. This change in the peak separation of the kHz QPOs is closely similar to that previously seen in Sco X-1, but takes place at a ten times lower average luminosity. We discuss this result within the framework of models that have been proposed for kHz QPO. Beat frequency models where the peak separation is identified with the neutron star spin rate, as well as the explanations previously proposed to account for the similar behavior of the QPOs in Sco X-1, are strongly challenged by this result.Comment: To appear in ApJL. AAS LaTex v4.0 (6 pages plus 3 postscript figures

Classification of evoked potentials by Pearson's correlation in a brain-computer interface

International audienceIn this paper, we describe and evaluate the performance of a linear classifier learning technique for use in a brain-computer interface. Electroencephalogram (EEG) signals acquired from individual subjets are analyzed with this technique in order to detect responses to visual stimuli. Signal processing and classification are used for implementing a palliative communication system which allows the individual to spell words. Performance with this technique is evaluated on data collected from eight individuals