633 research outputs found
Unintended and accidental medical radiation exposures in radiology: guidelines on investigation and prevention
This paper sets out guidelines for managing radiation exposure incidents involving patients in diagnostic and interventional radiology. The work is based on collation of experiences from representatives of international and national organizations for radiologists, medical physicists, radiographers, regulators, and equipment manufacturers, derived from an International Atomic Energy Agency Technical Meeting. More serious overexposures can result in skin doses high enough to produce tissue reactions, in interventional procedures and computed tomography, most notably from perfusion studies. A major factor involved has been deficiencies in training of staff in operation of equipment and optimization techniques. The use of checklists and time outs before procedures commence, and dose alerts when critical levels are reached during procedures can provide safeguards to reduce risks of these effects occurring. However, unintended and accidental overexposures resulting in relatively small additional doses can take place in any diagnostic or interventional X-ray procedure and it is important to learn from errors that occur, as these may lead to increased risks of stochastic effects. Such events may involve the wrong examinations, procedural errors, or equipment faults. Guidance is given on prevention, investigation and dose calculation for radiology exposure incidents within healthcare facilities. Responsibilities should be clearly set out in formal policies, and procedures should be in place to ensure that root causes are identified and deficiencies addressed. When an overexposure of a patient or an unintended exposure of a foetus occurs, the foetal, organ, skin and/or effective dose may be estimated from exposure data. When doses are very low, generic values for the examination may be sufficient, but a full assessment of doses to all exposed organs and tissues may sometimes be required. The use of general terminology to describe risks from stochastic effects is recommended rather than calculation of numerical values, as these are misleading when applied to individuals
Motivational Social Visualizations for Personalized E-Learning
A large number of educational resources is now available on the Web to support both regular classroom learning and online learning. However, the abundance of available content produces at least two problems: how to help students find the most appropriate resources, and how to engage them into using these resources and benefiting from them. Personalized and social learning have been suggested as potential methods for addressing these problems. Our work presented in this paper attempts to combine the ideas of personalized and social learning. We introduce Progressor + , an innovative Web-based interface that helps students find the most relevant resources in a large collection of self-assessment questions and programming examples. We also present the results of a classroom study of the Progressor + in an undergraduate class. The data revealed the motivational impact of the personalized social guidance provided by the system in the target context. The interface encouraged students to explore more educational resources and motivated them to do some work ahead of the course schedule. The increase in diversity of explored content resulted in improving students’ problem solving success. A deeper analysis of the social guidance mechanism revealed that it is based on the leading behavior of the strong students, who discovered the most relevant resources and created trails for weaker students to follow. The study results also demonstrate that students were more engaged with the system: they spent more time in working with self-assessment questions and annotated examples, attempted more questions, and achieved higher success rates in answering them
Fragmentation and Erosion of Two-Dimensional Aggregates in Shear Flow
We consider single two-dimensional aggregates containing glass particles trapped at a water/oil or water/air interface. Two modes for aggregate break up are observed: break up by fragmentation into a few parts and break up by erosion of single particles. We have studied the critical shear rate for these modes as a function of the aggregate size. Two different particle sizes were used. The smaller particles, with a radius of 65 m, form aggregates that break up predominantly by erosion at a shear rate between 0.5 and 0.7 s-1. This value hardly depends on the size of the aggregates. The larger particles, with a radius of 115 m, form aggregates that break by erosion or by fragmentation. In both modes, the critical shear rate again depends only weakly on the size of the aggregates and ranges between 1.6 and 2.2 s-1. Also the structural changes inside the aggregate before break up were studied. The aggregate behavior at the water/air and water/oil interfaces is quite similar. The critical shear rate for break up was also modeled. The model shows in both modes a weak dependence of the critical shear rate on the aggregate size, which is consistent with the experimental observations. The kinetics of the erosion process was also modeled and compared with the experimentally obtained time dependence of the aggregate size. The differences in the large and small particle systems can be attributed to the occurrence of friction forces between the particles, which one expects to be much larger for the large particle system, due to the stronger two-particle interactio
Providing awareness, explanation and control of personalized filtering in a social networking site
Social networking sites (SNSs) have applied personalized filtering to deal with overwhelmingly irrelevant social data. However, due to the focus of accuracy, the personalized filtering often leads to “the filter bubble” problem where the users can only receive information that matches their pre-stated preferences but fail to be exposed to new topics. Moreover, these SNSs are black boxes, providing no transparency for the user about how the filtering mechanism decides what is to be shown in the activity stream. As a result, the user’s usage experience and trust in the system can decline. This paper presents an interactive method to visualize the personalized filtering in SNSs. The proposed visualization helps to create awareness, explanation, and control of personalized filtering to alleviate the “filter bubble” problem and increase the users’ trust in the system. Three user evaluations are presented. The results show that users have a good understanding about the filter bubble visualization, and the visualization can increase users’ awareness of the filter bubble, understandability of the filtering mechanism and to a feeling of control over the data stream they are seeing. The intuitiveness of the design is overall good, but a context sensitive help is also preferred. Moreover, the visualization can provide users with better usage experience and increase users’ trust in the system
Mediated behavioural change in human-machine networks: exploring network characteristics, trust and motivation
Human-machine networks pervade much of contemporary life. Network change is
the product of structural modifications along with differences in participant
be-havior. If we assume that behavioural change in a human-machine network is
the result of changing the attitudes of participants in the network, then the
question arises whether network structure can affect participant attitude.
Taking citizen par-ticipation as an example, engagement with relevant
stakeholders reveals trust and motivation to be the major objectives for the
network. Using a typology to de-scribe network state based on multiple
characteristic or dimensions, we can pre-dict possible behavioural outcomes in
the network. However, this has to be medi-ated via attitude change. Motivation
for the citizen participation network can only increase in line with enhanced
trust. The focus for changing network dynamics, therefore, shifts to the
dimensional changes needed to encourage increased trust. It turns out that the
coordinated manipulation of multiple dimensions is needed to bring about the
desired shift in attitude.Comment: Paper submitted to SocInfo, organised by the Oxford Internet
Institute, September 201
QuizMap: Open social student modeling and adaptive navigation support with TreeMaps
In this paper, we present a novel approach to integrate social adaptive navigation support for self-assessment questions with an open student model using QuizMap, a TreeMap-based interface. By exposing student model in contrast to student peers and the whole class, QuizMap attempts to provide social guidance and increase student performance. The paper explains the nature of the QuizMap approach and its implementation in the context of self-assessment questions for Java programming. It also presents the design of a semester-long classroom study that we ran to evaluate QuizMap and reports the evaluation results. © 2011 Springer-Verlag Berlin Heidelberg
User-centred design of flexible hypermedia for a mobile guide: Reflections on the hyperaudio experience
A user-centred design approach involves end-users from the very beginning. Considering users at the early stages compels designers to think in terms of utility and usability and helps develop the system on what is actually needed. This paper discusses the case of HyperAudio, a context-sensitive adaptive and mobile guide to museums developed in the late 90s. User requirements were collected via a survey to understand visitors’ profiles and visit styles in Natural Science museums. The knowledge acquired supported the specification of system requirements, helping defining user model, data structure and adaptive behaviour of the system. User requirements guided the design decisions on what could be implemented by using simple adaptable triggers and what instead needed more sophisticated adaptive techniques, a fundamental choice when all the computation must be done on a PDA. Graphical and interactive environments for developing and testing complex adaptive systems are discussed as a further
step towards an iterative design that considers the user interaction a central point. The paper discusses
how such an environment allows designers and developers to experiment with different system’s behaviours and to widely test it under realistic conditions by simulation of the actual context evolving over time. The understanding gained in HyperAudio is then considered in the perspective of the
developments that followed that first experience: our findings seem still valid despite the passed time
Direct measurements of the effects of salt and surfactant on interaction forces between colloidal particles at water-oil interfaces
The forces between colloidal particles at a decane-water interface, in the
presence of low concentrations of a monovalent salt (NaCl) and of the
surfactant sodium dodecylsulfate (SDS) in the aqueous subphase, have been
studied using laser tweezers. In the absence of electrolyte and surfactant,
particle interactions exhibit a long-range repulsion, yet the variation of the
interaction for different particle pairs is found to be considerable. Averaging
over several particle pairs was hence found to be necessary to obtain reliable
assessment of the effects of salt and surfactant. It has previously been
suggested that the repulsion is consistent with electrostatic interactions
between a small number of dissociated charges in the oil phase, leading to a
decay with distance to the power -4 and an absence of any effect of electrolyte
concentration. However, the present work demonstrates that increasing the
electrolyte concentration does yield, on average, a reduction of the magnitude
of the interaction force with electrolyte concentration. This implies that
charges on the water side also contribute significantly to the electrostatic
interactions. An increase in the concentration of SDS leads to a similar
decrease of the interaction force. Moreover the repulsion at fixed SDS
concentrations decreases over longer times. Finally, measurements of three-body
interactions provide insight into the anisotropic nature of the interactions.
The unique time-dependent and anisotropic interactions between particles at the
oil-water interface allow tailoring of the aggregation kinetics and structure
of the suspension structure.Comment: Submitted to Langmui
King-Type Derivative-Free Iterative Families: Real and Memory Dynamics
A biparametric family of derivative-free optimal iterative methods of order four, for solving nonlinear equations, is presented. From the error equation of this class, different families of iterative schemes with memory can be designed increasing the order of convergence up to six. The real stability analysis of the biparametric family without memory is made on quadratic polynomials, finding areas in the parametric plane with good performance. Moreover, in order to study the real behavior of the parametric class with memory, we associate it with a discrete multidimensional dynamical system. By analyzing the fixed and critical points of its vectorial rational function, we can select those methods with best stability properties
Cyclic AMP-binding and cyclic AMP-dependent protein kinase activities in the cytosol of differentiating bone marrow erythroblasts
- …