Processing line for industrial radiation-thermal synthesis of doped lithium ferrite powders

The paper considers the issues of industrial production of doped lithium ferrite powders by radiation-thermal method. A technological scheme of the processing line is suggested. The radiation-thermal technological scheme enables production of powders with technical characteristics close to the required ones under relatively low temperature annealing conditions without intermediate mixing. The optimal conditions of the radiation-thermal synthesis are achieved isothermally under irradiation by the electron beam with energy of 2.5 MeV in the temperature range of 700-750 °С within~ 120 min

The BM@N Experiment at JINR: Status and Physics Program

BM@N (Baryonic Matter at Nuclotron) is the first experiment to be realized at the accelerator complex of NICA-Nuclotron at JINR (Dubna, Russia). The aim of the experiment is to study interactions of relativistic heavy ion beams with energy up to of strange mesons, multi-strange hyperons and light hyper-nuclei which are produced in nucleus-nucleus collisions close to the kinematic threshold. The BM@N set-up, the experimental program and first results of technical runs are presented

Detection and defect correction of operating process

The article is devoted to the current problem of enterprise competitiveness rise in hard and competitive terms of business environment. The importance of modern equipment for detection of defects and their correction is explained. Production of chipboard is used as an object of research. Short description and main results of estimation efficiency of innovative solutions of enterprises are considered

Steady operation of the electric drive of pipeline armature in the emergency situation at low ambient temperatures

This scientific work is devoted to the study of the electric drive operation of pipeline armature at low ambient temperatures. Hit of moisture into reducer and rare inclusions in operation of locking regulator are led to curdling lubricant that causes the increased wear of mechanical knots. There is a probability of freezing mechanical components; it leads to emergency situations. The problem of improving working efficiency of the electric drive of shut-off regulating armature at low ambient temperatures of the environment is solved in this work. A simulation model of the GUSAR electric drive was developed to solve this problem. Studies of the simulation model show the need to limit the torque increase rate on a drive motor shaft. The algorithm of setting of PI speed controller to obtain acceptable transient processes is suggested. Recommendations for the use of the algorithm in the microprocessor control system of electric drive are proposed. It is shown that the electric drive operation algorithm with torque increasing limitation on the motor shaft will be smoothly working off the perturbing actions that occur in pipeline armature

Physico-chemical Modification of the Fibrous Filter Nozzles for Purification Processes of Water and Air

A set of experiments to study physical and chemical modification of the surface of fibers is conducted to expand the area of their application for purification of water, gas and air (including that in conditions of space). The possibility of modification of filter nozzles in the process of fiber formation by particles of coal of BAU type, copper sulfide and silver chloride is experimentally shown. The fraction of the copper sulfide powder less than 50 microns in size was crushed in a spherical mill; it was deposited on fiber at air temperature of 50° C and powder consumption of 0.5 g/l of air. The resulting material contained 6–18 CuS particles per 1 cm of the fiber length. An effective bactericidal fibrous material can be produced using rather cheap material – CuS and relatively cheap natural compounds of sulphides and oxides of heavy metals

Pneumatic device of the preload and dynamic loads balancing to reduce the intensity of thermal processes in the metal cutting process

Improved reliability of the technological system "machine-tool-instrument-detail" is an important current task. Backlashes and insufficient stiffness of technological system lead to intensive wear of the cutting tool, increasing the heat in the cutting zone. Due to high temperature in the thin surface layers of the workpiece and tool thermal processes may occur which are similar to release and can cause the structural changes of the material. The current article presents the final design of the device which has been developed to reduce the intensity of thermal processes in metal cutting

The BM@N spectrometer at the NICA accelerator complex

BM@N (Baryonic Matter at Nuclotron) is the first experiment operating and taking data at the Nuclotron/NICA ion-accelerating complex.The aim of the BM@N experiment is to study interactions of relativistic heavy-ion beams with fixed targets. We present a technical description of the BM@N spectrometer including all its subsystems.Comment: 34 pages, 47 figures, 6 table

Production of {\pi}+ and K+ mesons in argon-nucleus interactions at 3.2 AGeV

First physics results of the BM@N experiment at the Nuclotron/NICA complex are presented on {\pi}+ and K+ meson production in interactions of an argon beam with fixed targets of C, Al, Cu, Sn and Pb at 3.2 AGeV. Transverse momentum distributions, rapidity spectra and multiplicities of {\pi}+ and K+ mesons are measured. The results are compared with predictions of theoretical models and with other measurements at lower energies.Comment: 29 pages, 20 figure

Cognitive and sociocultural aspects of robotized technology: innovative processes of adaptation

The paper dwells upon interaction between socio-cultural phenomena and cognitive characteristics of robotized technology. The interdisciplinary approach was employed in order to cast light on the manifold and multilevel identity of scientific advance in terms of robotized technology within the mental realm. Analyzing robotized technology from the viewpoint of its significance for the modern society is one of the upcoming trends in the contemporary scientific realm. The robots under production are capable of interacting with people; this results in a growing necessity for the studies on social status of robotized technological items. Socio-cultural aspect of cognitive robotized technology is reflected in the fact that the nature becomes 'aware' of itself via human brain, a human being tends to strives for perfection in their intellectual and moral dimensions