Investigation of energy transfer in the ignition mechanism of a NASA standard initiator

The principal objective of the proposed research was to construct a detailed computer model of the NASA Standard Initiator (NSI). The NSI plays a critical role in initiating various pyrotechnic events in the National Space Transportation System and is also used in Shuttle payload applications. Several initiators failed when being tested at very low temperatures (4 to 20 K). During subsequent investigation an unacceptable high failure rate was found even at higher temperatures (100 to 150 K) but the precise cause of failure was not determined. The modelling work was undertaken to investigate reasons for failure and to predict the performance of alternate firing schemes. The work has shown that the most likely cause of failure at low temperature is poor thermal contact between the electrically heated bridgewire and the pyrotechnic charge. This problem may be masked if there is good thermal contact between the bridgewire and the alumina charge cup. The high thermal conductivity of alumina at cryogenic temperatures was overlooked in previous analyses, which assumed that the charge cup acted as a thermal insulator

Dynamics of a Mn spin coupled to a single hole confined in a quantum dot

Using the emission of the positively charged exciton as a probe, we analyze the dynamics of the optical pumping and the dynamics of the relaxation of a Mn spin exchange-coupled with a confined hole spin in a II-VI semiconductor quantum dot. The hole-Mn spin can be efficiently initialized in a few tens of $ns$ under optical injection of spin polarized carriers. We show that this optical pumping process and its dynamics are controlled by electron-Mn flip-flops within the positively charged exciton-Mn complex. The pumping mechanism and its magnetic field dependence are theoretically described by a model including the dynamics of the electron-Mn complex in the excited state and the dynamics of the hole-Mn complex in the ground state of the positively charged quantum dot. We measure at zero magnetic field a spin relaxation time of the hole-Mn spin in the $\mu s$ range or shorter. This hole-Mn spin relaxation is induced by the presence of valence band mixing in self-assembled quantum dots

Variance Reduction For A Discrete Velocity Gas

We extend a variance reduction technique developed by Baker and Hadjiconstantinou [1] to a discrete velocity gas. In our previous work, the collision integral was evaluated by importance sampling of collision partners [2]. Significant computational effort may be wasted by evaluating the collision integral in regions where the flow is in equilibrium. In the current approach, substantial computational savings are obtained by only solving for the deviations from equilibrium. In the near continuum regime, the deviations from equilibrium are small and low noise evaluation of the collision integral can be achieved with very coarse statistical sampling. Spatially homogenous relaxation of the Bobylev-Krook-Wu distribution [3,4], was used as a test case to verify that the method predicts the correct evolution of a highly non-equilibrium distribution to equilibrium. When variance reduction is not used, the noise causes the entropy to undershoot, but the method with variance reduction matches the analytic curve for the same number of collisions. We then extend the work to travelling shock waves and compare the accuracy and computational savings of the variance reduction method to DSMC over Mach numbers ranging from 1.2 to 10.Aerospace Engineering and Engineering Mechanic

Far Field Deposition Of Scoured Regolith Resulting From Lunar Landings

As a lunar lander approaches a dusty surface, the plume from the descent engine impinges on the ground, entraining loose regolith into a high velocity dust spray. Without the inhibition of a background atmosphere, the entrained regolith can travel many kilometers from the landing site. In this work, we simulate the flow field from the throat of the descent engine nozzle to where the dust grains impact the surface many kilometers away. The near field is either continuum or marginally rarefied and is simulated via a loosely coupled hybrid DSMC - Navier Stokes (DPLR) solver. Regions of two-phase and polydisperse granular flows are solved via DSMC. The far field deposition is obtained by using a staged calculation, where the first stages are in the near field where the flow is quasi-steady and the outer stages are unsteady. A realistic landing trajectory is approximated by a set of discrete hovering altitudes which range from 20m to 3m. The dust and gas motions are fully coupled using an interaction model that conserves mass, momentum, and energy statistically and inelastic collisions between dust particles are also accounted for. Simulations of a 4 engine configuration are also examined, and the erosion rates as well as near field particle fluxes are discussed.Astronom

Ecology of rotifers in Cochin backwaters, Kerala, India

Water and rotifer samples were analysed simultaneously from nine different habitats along Cochin backwaters during the period from August 2000 to July 2002. The correlation coefficients were worked out between rotifers and thirteen environmental characteristics with respect to each station separately as well as in the study area as a whole. Rotifers showed significant positive correlations with nitrite, chlorophyll a, total suspended solids, phosphate and biochemical oxygen demand, in the study area. Station-wise results on correlation along with the levels of significance are presented and discussed

Investigation of heat transfer in zirconium potassium perchlorate at low temperature: A study of the failure mechanism of the NASA standard initiator

The objective of this work was to study the reasons for the failure of pyrotechnic initiators at very low temperatures (10 to 100 K). A two-dimensional model of the NASA standard initiator was constructed to model heat transfer from the electrically heated stainless steel bridgewire to the zirconium potassium perchlorate explosive charge and the alumina charge cup. Temperature dependent properties were used in the model to simulate initiator performance over a wide range of initial temperatures (10 to 500 K). A search of the thermophysical property data base showed that pure alumina has a very high thermal conductivity at low temperatures. It had been assumed to act as a thermal insulator in all previous analyses. Rapid heat transfer from the bridgewire to the alumina at low initial temperatures was shown to cause failure of the initiators if the wire did not also make good contact with the zirconium potassium perchlorate charge. The mode is able to reproduce the results of the tests that had been conducted to investigate the cause for failure. It also provides an explanation for previously puzzling results and suggests simple design changes that will increase reliability at very low initial temperatures

DSMC Modeling Of Gasdynamics, Radiation And Fine Particulates In Ionian Volcanic Jets

Aerospace Engineerin