The LHCb tracking system

The LHCb detector is being constructed to measure CP-violation parameters and rare B decays. The LHCb tracking system consists of silicon micro-strip detectors and straw chambers. The system is composed of four major sub-detectors: the Velo (Vertex Locator), TT (Trigger Tracker), IT (Inner Tracker) and OT (Outer Tracker). The Velo uses silicon micro-strip detectors which are placed at 8 mm from the beam, and that can be retracted during injection. The TT is a four-layer silicon strip detector that covers the full acceptance of the experiment at the entrance of the spectrometer dipole magnet. The fringe field of the magnet allows the transverse momentum of tracks to be measured by their deflection between the Velo and TT detectors for use in the trigger. The IT and OT detectors measure the tracks behind the magnet. The IT is a silicon strip detector which covers the region close to the beam pipe, while the OT is a straw tube detector which covers the rest of the acceptance. All of the detectors are currently under construction and will be ready for installation before the end of 2006. The expected performance for the tracking system is as follows; the tracking efficiency is larger than 95% and the ghost rate is smaller than 7%, for tracks with a momentum larger than 12 GeV. The momentum resolution ranges from 0.35% to 0.5% and the IP resolution reaches 14 mm for tracks with a large transverse momentum

Repeat ridge jumps associated with plume‐ridge interaction, melt transport, and ridge migration

Repeated shifts, or jumps, of mid-ocean ridge segments toward nearby hot spots can produce large, long-term changes to the geometry and location of the tectonic plate boundaries. Ridge jumps associated with hot spot–ridge interaction are likely caused by several processes including shear on the base of the plate due to expanding plume material as well as reheating of lithosphere as magma passes through it to feed off-axis volcanism. To study how these processes influence ridge jumps, we use numerical models to simulate 2-D (in cross section) viscous flow of the mantle, viscoplastic deformation of the lithosphere, and melt migration upward from the asthenospheric melting zone, laterally along the base of the lithosphere, and vertically through the lithosphere. The locations and rates that magma penetrates and heats the lithosphere are controlled by the time-varying accumulation of melt beneath the plate and the depth-averaged lithospheric porosity. We examine the effect of four key parameters: magmatic heating rate of the lithosphere, plate spreading rate, age of the seafloor overlying the plume, and the plume-ridge migration rate. Results indicate that the minimum value of the magmatic heating rate needed to initiate a ridge jump increases with plate age and spreading rate. The time required to complete a ridge jump decreases with larger values of magmatic heating rate, younger plate age, and faster spreading rate. For cases with migrating ridges, models predict a range of behaviors including repeating ridge jumps, much like those exhibited on Earth. Repeating ridge jumps occur at moderate magmatic heating rates and are the result of changes in the hot spot magma flux in response to magma migration along the base of an evolving lithosphere. The tendency of slow spreading to promote ridge jumps could help explain the observed clustering of hot spots near the Mid-Atlantic Ridge. Model results also suggest that magmatic heating may significantly thin the lithosphere, as has been suggested at Hawaii and other hot spots

Subsidence of the West Siberian Basin: Effects of a mantle plume impact

Comparison of modeling results with observed subsidence patterns from the West Siberian Basin provides new insight into the origin of the Siberian Traps, and constrains the temperature, size, and depth of an impacting mantle plume head during and after the eruption of the Siberian Traps at the Permian-Triassic boundary (250 Ma). We compare subsidence patterns from one-dimensional conductive heat flow models to observed subsidence from backstripping studies of wells in the basin. This results in a best-fit scenario with a 50-km-thick initial plume head with a temperature of 1500 °C situated 50 km below the surface, and an initial regional crustal thickness of 34 km, in agreement with published values. Backstripping and modeling results agree very well, including a 60–90 m.y. delay between the rifting phase and the first regional sedimentation. Regional subsidence patterns indicate that the plume head was present across a minimum area of ∼2.5 × 106 km2. These results re-emphasize the viability of a mantle plume origin for the Siberian Traps, provide important constraints on the dynamics of mantle plume heads, and suggest a thermal control for the subsidence of the West Siberian Basin

Relamination of mafic subducting crust throughout Earth’s history

Earth has likely cooled by several hundred degrees over its history, which has probably affected subduction dynamics and associated magmatism. Today, the process of compositional buoyancy driven upwelling, and subsequent underplating, of subducted materials (commonly referred to as “relamination”) is thought to play a role in the formation of continental crust. Given that Archean continental crust formation is best explained by the involvement of mafic material, we investigate the feasibility of mafic crust relamination under a wide range of conditions applicable to modern and early Earth subduction zones, to assess if such a process might have been viable in an early Earth setting. Our numerical parametric study illustrates that the hotter, thicker-crust conditions of the early Earth favour the upward relamination of mafic subducting crust. The amount of relaminating subducting crust is observed to vary significantly, with subduction convergence rate having the strongest control on the volume of relaminated material. Indeed, removal of the entire mafic crust from the subducting slab is possible for slow subduction (∼2 cm/yr) under Archean conditions. We also observe great variability in the depth at which this separation occurs (80–120 km), with events corresponding to shallower detachment being more voluminous, and that relaminating material has to remain metastably buoyant until this separation depth, which is supported by geological, geophysical and geodynamical observations. Furthermore, this relamination behaviour is commonly episodic with a typical repeat time of approximately 10 Myrs, similar to timescales of episodicity observed in the Archean rock record. We demonstrate that this relamination process can result in the heating of considerable quantities of mafic material (to temperatures in excess of 900 °C), which is then emplaced below the over-riding lithosphere. As such, our results have implications for Archean subduction zone magmatism, for continental crust formation in the early Earth, and provide a novel explanation for the secular evolution of continental crust

Plate rotation during continental collision and its relationship with the exhumation of UHP metamorphic terranes: Application to the Norwegian Caledonides

Lateral variation and asynchronous onset of collision during the convergence of continents can significantly affect the burial and exhumation of subducted continental crust. Here we use 3-D numerical models for continental collision to discuss how deep burial and exhumation of high and ultrahigh pressure metamorphic (HP/UHP) rocks are enhanced by diachronous collision and the resulting rotation of the colliding plates. Rotation during collision locally favors eduction, the inversion of the subduction, and may explain the discontinuous distribution of ultra-high pressure (UHP) terranes along collision zones. For example, the terminal (Scandian) collision of Baltica and Laurentia, which formed the Scandinavian Caledonides, resulted in the exhumation of only one large HP/UHP terrane, the Western Gneiss Complex (WGC), near the southern end of the collision zone. Rotation of the subducting Baltica plate during collision may provide an explanation for this distribution. We explore this hypothesis by comparing orthogonal and diachronous collision models and conclude that a diachronous collision can transport continental material up to 60 km deeper, and heat material up to 300°C hotter, than an orthogonal collision. Our diachronous collision model predicts that subducted continental margin material returns to the surface only in the region where collision initiated. The diachronous collision model is consistent with petrological and geochonological observations from the WGC and makes predictions for the general evolution of the Scandinavian Caledonides. We propose the collision between Laurentia and Baltica started at the southern end of the collisional zone, and propagated northward. This asymmetric geometry resulted in the counter clockwise rotation of Baltica with respect to Laurentia, consistent with paleomagnetic data from other studies. Our model may have applications to other orogens with regional UHP terranes, such as the Dabie Shan and Papua New Guinea cases, where block rotation during exhumation has also been recorded

Slab stiffness control of trench motion: Insights from numerical models

Subduction zones are not static features, but trenches retreat (roll back) or advance. Here, we investigate the dominant dynamic controls on trench migration by means of two- and three-dimensional numerical modeling of subduction. This investigation has been carried out by systematically varying the geometrical and rheological model parameters. Our viscoplastic models illustrate that advancing style subduction is promoted by a thick plate, a large viscosity ratio between plate and mantle, and a small density contrast between plate and mantle or an intermediate width (w ∼ 1300 km). Advancing slabs dissipate ∼45% to ∼50% of the energy in the system. Thin plates with relatively low viscosity or relatively high density, or wide slabs (w ∼ 2300 km), on the other hand, promote subduction in the retreating style (i.e., slab roll-back). The energy dissipated by a retreating slab is ∼35% to ∼40% of the total dissipated energy. Most of the energy dissipation occurs in the mantle to accommodate the slab motion, whereas the lithosphere dissipates the remaining part to bend and “unbend.” With a simple scaling law we illustrate that this complex combination of model parameters influencing trench migration can be reduced to a single one: plate stiffness. Stiffer slabs cause the trench to advance, whereas more flexible slabs lead to trench retreat. The reason for this is that all slabs will bend into the subduction zone because of their low plastic strength near the surface, but stiff slabs have more difficulty “unbending” at depth, when arriving at the 660-km discontinuity. Those bent slabs tend to cause the trench to advance. In a similar way, variation of the viscoplasticity parameters in the plate may change the style of subduction: a low value of friction coefficient weakens the plate and results in a retreating style, while higher values strengthen the plate and promote the advancing subduction style. Given the fact that also on Earth the oldest (and therefore probably stiffest) plates have the fastest advancing trenches, we hypothesize that the ability of slabs to unbend after subduction forms the dominant control on trench migration

Overriding Plate Thickness as a Controlling Factor for Trench Retreat Rates in Narrow Subduction Zones

Slab width is a significant factor in controlling subduction zone dynamics, particularly the retreat velocities, which tend to decrease with wider slabs. However, observations of natural narrow subduction zones reveal no correlation between slab width and trench velocities. This suggests that other factors may exert a greater influence. In this study, we employ 3D numerical subduction models to systematically assess the impact of slab width, strength of slab coupling to the lateral plate (LP), and overriding plate (OP) thickness on trench kinematics and geometry. Our models focus on narrow slabs (400–1,200 km), and the results demonstrate that, in the case of narrow subduction zones, the slab width has little effect on trench migration rates and the viscous coupling at the lateral slab edge is only important for very narrow subduction zones (≤800 km). Conversely, the OP thickness emerges as a crucial factor, with increasing plate thickness leading to a strong decrease in trench velocities. These findings provide an explanation for the observed trench velocities in natural narrow subduction zones, where an inverse relationship with OP thickness is evident. Furthermore, our study reveals that not only slab width, but also the OP thickness and the slab coupling to the LP, significantly influence trench geometry. Strong lateral coupling promotes the formation of concave trench geometries, while thick overriding plates favor the development of “w”‐shaped geometries. Overall, a comprehensive understanding of subduction processes necessitates considering the interplay between slab width, OP thickness, and slab coupling to the LP