15 research outputs found
The IT framework of the European Archive of Historical Earthquake Data (AHEAD)
The European Archive of Historical EArthquake Data (AHEAD) has been developed in the frame of the EC project NERIES and maintained in the frame of the EC project SHARE.AHEAD makes available on the web the result of a networked historical earthquake data research, formalised in terms of studies (papers, reports, macroseismic data points, etc). It provides an updated wealth of data that are unique for many European events in the time-window 1000-1963.A series of IT solutions have been developed in order to support both the research and the networking activities carried out within the building process of AHEAD. The resulting framework is an equally balanced effort in both the back-end and front-end design and implementation, a key feature in a research approach very much human-centred, where the quantity of data is small if compared to terabytes of instrumental data.AHEAD is composed of five mutually dependent data-components: 1) the “Digital Library”, where all the historical earthquake studies are stored and described by bibliographical metadata, 2) the “Consensus Earthquake Inventory”, where the relevant macroseismic data (event date, epicentral area, number of macroseismic data-point, maximum observed intensity) are extrapolated, the best available information are selected and fake earthquakes are highlighted, 3) the “European Macroseismic Database”, where all the available macroseismic data-points (MDPs) are stored, 4) the “Parameters Laboratory”, where earthquakes parameterisation methods are applied to MDPs in order to obtain epicentral locations and magnitudes and 5) the “European Earthquake Catalogue”.The presentation will demonstrate the adopted IT solutions separately for the back-end and the front-end, both for the access-restricted website and the general-purpose implementation designed to be included in the “Earthquake Data Portal”, developed within the EC project NERIES, which targets a much broader scientific community
Effect of time on recovery of plasma microsamples for the quantitative determination of vancomycin
The reliability of extraction recovery of an analyte in bioanalysis is fundamentally important for downstream analytical testing. For dried format microsamples, if the recovery changes with time the concentration in clinical samples, derived from calibration standards and alongside quality control samples prepared following different drying protocols, may not reflect the true result. The purpose of this paper was therefore to evaluate changes to extraction recovery across time for one analyte, the glycopeptide antibiotic vancomycin, in plasma using two dried microsampling formats, dried plasma spots and volumetric absorptive microsampling. </jats:p
Effect of time on recovery of plasma microsamples for the quantitative determination of vancomycin
Clinical application of microsampling versus conventional sampling techniques in the quantitative bioanalysis of antibiotics: a systematic review
Conventional sampling techniques for clinical pharmacokinetic studies often require the removal of large blood volumes from patients. This can result in a physiological or emotional burden, particularly for neonates or pediatric patients. Antibiotic pharmacokinetic studies are typically performed on healthy adults or general ward patients. These may not account for alterations to a patient's pathophysiology and can lead to suboptimal treatment. Microsampling offers an important opportunity for clinical pharmacokinetic studies in vulnerable patient populations, where smaller sample volumes can be collected. This systematic review provides a description of currently available microsampling techniques and an overview of studies reporting the quantitation and validation of antibiotics using microsampling. A comparison of microsampling to conventional sampling in clinical studies is included
An LC-MS/MS method to determine vancomycin in plasma (total and unbound), urine and renal replacement therapy effluent
Aim: Critical illness and medical interventions, such as renal replacement therapy, can cause changes to vancomycin pharmacokinetics and lead to suboptimal dosing. To comprehensively characterize vancomycin pharmacokinetic a method must measure vancomycin in a range of clinical matrices. Results: A LC–MS/MS method was developed using hydrophilic interaction liquid chromatography and microsample volumes, where possible. For all matrices, the linear concentration range was 1–100 μg/ml, interassay accuracy and precision was within 15%, and recovery above 80%. No matrix effects were observed. Calibration equivalence may be applied for some matrix combinations. Conclusion: A method for the analysis of vancomycin in plasma (total, unbound), urine and renal replacement therapy effluent, suitable for use in any patient pharmacokinetic study, has been developed and validated. </jats:p
A validated UHPLC-MS/MS method for the measurement of riluzole in plasma and myocardial tissue samples
Analysis of capillary microsamples obtained from a skin-prick to measure vancomycin concentrations as a valid alternative to conventional sampling: a bridging study
A bridging study is presented to investigate the applicability of measuring vancomycin concentrations obtained by finger-prick. A total of 25 paired plasma samples, collected from finger prick as capillary microsampling and arterial plasma samples collected from an indwelling cannula as conventional sampling, were obtained from critically ill patients receiving vancomycin. The maximum concentration (C) and the minimum concentration (C) measured were 66.2 mg/L and 29.7 mg/L for capillary microsampling and 78.9 mg/L, 25.6 mg/L for conventional sampling, respectively. The area under the concentration-time curve from 0 to 6 h (AUC) ranged between 94.8 and 269 mg/L.h for capillary microsampling and from 106 and 303 mg/L.h for conventional sampling. The comparative study conducted was assessed using three different statistical approaches: Bland-Altman and Passing-Bablok regression analyses and the USFDA criterion for the incurred sample reanalysis. The results of this analysis revealed no significant bias and a strong correlation between both sampling methods, with 95% of the calculated concentrations from the paired plasma samples laying within 20% of difference of the mean. This bridging study verifies that capillary microsampling may serve as an alternative to conventional sampling techniques to support clinical applications for measuring vancomycin concentrations in plasma
A validated UHPLC-MS/MS method for the measurement of riluzole in plasma and myocardial tissue samples
Through blocking the cardiac persistent sodium current, riluzole has the potential to prevent myocardial damage post cardiac bypass surgery. A sensitive UHPLC–MS/MS method was developed and validated for quantitation of riluzole and 5-methoxypsoralen in human plasma and myocardial tissue homogenate using a liquid–liquid extraction with dichloromethane. The chromatographic separation was achieved using Shimadzu Shim-pack XR-ODS III, 2.0 × 50 mm, 1.6 μm column with a gradient mobile phase comprising methanol and ammonium acetate buffer pH 3.6 in purified water. The analyte and internal standard were separated within 3.5 min. Riluzole quantitation was achieved using the mass transitions of 235–138 for riluzole and 217–156 for 5-methoxypsoralen. The method was linear for riluzole plasma concentrations from 0.2 to 500 ng/mL and myocardial tissue homogenate concentrations from 0.2 to 100 ng/mL. The method developed was successfully applied to a clinical study for patients receiving riluzole while undergoing cardiac bypass surgery.J.A. Roberts is a recipient of an Australian National Health and MedicalResearch Council Fellowship (APP1048652). The authors acknowledgefunding from the Australian National Health and Medical ResearchCouncil for Project Grants (APP1044941, APP1062040) and Centreof Research Excellence (APP1099452
A UHPLC–MS/MS method for the simultaneous determination of piperacillin and tazobactam in plasma (total and unbound), urine and renal replacement therapy effluent
Piperacillin-tazobactam is a beta-lactam/beta-lactamase combination antibiotic used in patients with moderate to severe infection. Dosing of piperacillin-tazobactam requires an understanding of this patient group to maximise the effectiveness of this antibiotic and limit a further emergence of resistant pathogens. This is the first method that measures piperacillin and tazobactam simultaneously, across this range of clinically-relevant biological matrices. The calibration line was linear across the concentration range of 0.5–500 μg/mL for piperacillin and 0.625–62.5 μg/mL for tazobactam. All validation testing for matrix effects, precision and accuracy, specificity and stability were within 15%. A calibration equivalence study was performed to investigate the suitability of applying calibration curves prepared in an alternative matrix, with a mean bias of −10.8% identified for the application of a calibration line prepared for tazobactam in plasma only. Bias for all other calibration lines prepared in alternate matrices was within the 5% acceptance criteria. The method was successfully applied to a pharmacokinetic study of a critically ill patient receiving renal replacement therapy, with the results included