Entomological Origin of Honey Discriminated by NMR Chloroform Extracts in Ecuadorian Honey

Honeys are produced by Apis mellifera and stingless bees (Meliponini) in Ecuador. We studied honey produced in beeswax combs by Apis mellifera, and honey produced in pots by Geotrigona and Scaptotrigona bees. Chloroform extracts of honey were obtained for fast NMR spectra. The 1D spectra were acquired at 298 K, with a 600 MHz NMR Bruker instrument, using a modified double pulsed field gradient spin echoes (DPFGSE) sequence. Signals of 1H NMR spectra were integrated and used as inputs for PCA, PLS-DA analysis, and labelled sets of classes were successfully identified, enhancing the separation between the three groups of honey according to the entomological origin: A. mellifera, Geotrigona and Scaptotrigona. This procedure is therefore recommended for authenticity test of honey in Ecuador

Support services for ceramic fiber-ceramic matrix composites. Annual technical progress report

The University of North Dakota Energy and Environmental Research Center (EERC) is providing technical assistance and test materials to the US Department of Energy (DOE) Advanced Research and Technology Development (AR and TD) Materials Program investigating ceramic and advanced alloy corrosion in fossil energy systems. The main activity, which is reported here, is to perform thermochemical equilibrium calculations to develop recommendations for test conditions under which to perform corrosion measurements of structural and particle filter materials. The modeling is primarily being performed to determine possible mechanisms of corrosion, especially by species that vaporize in the gasifier then condense on downstream surfaces. For this year, the focus was on the stability of nickel in structural and filter alloys. This work was done in an effort to explain the existence of nickel-containing condensates found downstream of particulate filters in an EERC pilot-scale coal gasifier which operates under conditions similar to the Pinon Pine system, and to determine possible operating conditions that could reduce the wastage of nickel from structural and filter alloys

The Associations of Experiencing the COVID-19 Pandemic With Religiosity and Spirituality:A Cross-Sectional Study in Czech Adults

Objectives: We investigated the associations between religiosity/spirituality and respondents' changes in their relationships, feelings, thinking, and behaviour during the first wave of the COVID-19 pandemic in the Czech Republic.Methods: A sample of Czech adults (n = 1,434; 48.3 +/- 16.4 years; 49.65% women) participated in the online survey. We measured spirituality, religiosity, self-reported changes in relationships, disrupted feelings, and changes in behaviour during the pandemic.Results: Spiritual respondents were more likely to report increased physical activity, sex, reading and self-education, with odds ratios (ORs) ranging from 1.26 (95% confidence interval 1.09-1.46) to 1.56 (1.31-1.86). The combination of spirituality and religiosity led to an increase in the range of ORs to 1.57-2.69. Spiritual and religious participants were less likely to feel the decrease of hope by 70%, while mere spirituality significantly reduced the decrease of hope by only 30%. Religiosity itself led to a lower risk of reporting a disrupted day structure with an OR = 0.74 (0.58-0.95).Conclusion: Religiosity and spirituality separately help people during a pandemic in some areas. Especially their combination has a more positive impact on relationships, feelings, and behaviour

Investigating nano-precipitation in a V-containing HSLA steel using small angle neutron scattering

Interphase precipitation (IPP) of nanoscale carbides in a vanadium-containing high-strength low-alloy steel has been investigated. Small angle neutron scattering (SANS) and transmission electron microscopy (TEM) were employed to characterize the precipitates and their size distributions in Fe-0.047C-0.2V-1.6Mn (in wt.%) alloy samples which had been austenitized, isothermally transformed at 700 °C for between 3 and 600 min and water quenched. TEM confirms that, following heat treatment, rows of vanadium-containing nanoscale interphase precipitates were present. Model-independent analysis of the nuclear SANS signal and model fitting calculations, using oblate spheroid and disc-shapes, were performed. The major axis diameter increased from 18 nm after 3 min to 35 nm after 600 min. Precipitate volume percent increased from 0.09 to 0.22 vol% over the same period and number density fell from 2 × 1021 to 5 × 1020 m−3. A limited number of measurements of precipitate maximum diameters from TEM images showed the mean value increased from 8 nm after 5 min to 28 nm after 600 min which is in reasonable agreement with the SANS data

Search for MSSM Higgs bosons decaying to μ+μ-in proton-proton collisions at √s=13TeV

A search is performed for neutral non-standard-model Higgs bosons decaying to two muons in the context of the minimal supersymmetric standard model (MSSM). Proton-proton collision data recorded by the CMS experiment at the CERN Large Hadron Collider at a center-of-mass energy of 13TeVwere used, corresponding to an integrated luminosity of 35.9fb-1. The search is sensitive to neutral Higgs bosons produced via the gluon fusion process or in association with a bbquark pair. No significant deviations from the standard model expectation are observed. Upper limits at 95% confidence level are set in the context of the mmod+hand phenomenological MSSM scenarios on the parameter tanβas a function of the mass of the pseudoscalar Aboson, in the range from 130 to 600GeV. The results are also used to set a model-independent limit on the product of the branching fraction for the decay into a muon pair and the cross section for the production of a scalar neutral boson, either via gluon fusion, or in association with bquarks, in the mass range from 130 to 1000GeV

Zn Diffusion and α-Fe(Zn) Layer Growth During Annealing of Zn-Coated B Steel

Direct hot press forming of Zn-coated 22MnB5 steels is impeded by micro-cracks that occur in the substrate due to the presence of Zn during the forming process. A study was therefore undertaken to quantify concentration of Zn across the α-Fe(Zn) coating and on grain boundaries in the α-Fe(Zn) layer and the underlying γ-Fe(Zn) substrate after isothermal annealing of Zn-coated 22MnB5 at 1173 K (900 °C) and to link the Zn distribution to the amount and type of micro-cracks observed in deformed samples. Finite difference model was developed to describe Zn diffusion and the growth of the α-Fe(Zn) layer. The penetration of Zn into the γ-Fe(Zn) substrate after 600 seconds annealing at 1173 K (900 °C) through bulk diffusion is estimated to be 3 μm, and the diffusion depth of Zn on the γ-Fe(Zn) grain boundaries is estimated to be 6 μm, which is significantly shorter than the maximum length (15 to 50 μm) of the micro-cracks formed in the severely stressed conditions, indicating that the Zn diffusion into the γ-Fe(Zn) from the α-Fe(Zn) during annealing is not correlated to the depth of micro-cracks. On the other hand, the maximum amount of Zn present in α-Fe(Zn) layer decreases with annealing time as the layer grows and Zn oxidizes, and the amount of Zn-enriched areas inside the α-Fe(Zn) layer is reduced leading to reduced length of cracking. Solid-Metal-Induced Embrittlement mechanism is proposed to explain the benefit of extended annealing on reduced depth of micro-crack penetration into the γ-Fe(Zn) substrate

Study of the B +→ J / ψ Λ ¯ p decay in proton-proton collisions at √s = 8 TeV

A study of the B +→ J / ψ Λ ¯ p decay using proton-proton collision data collected at s = 8 TeV by the CMS experiment at the LHC, corresponding to an integrated luminosity of 19.6 fb−1, is presented. The ratio of branching fractions B(B+→J/ψΛ¯p)/B(B+→J/ψK∗(892)+) is measured to be (1.054 ± 0.057(stat) ± 0.035(syst) ± 0.011(B))%, where the last uncertainty reflects the uncertainties in the world-average branching fractions of Λ ¯ and K*(892) + decays to reconstructed final states. The invariant mass distributions of the J / ψ Λ ¯ , J/ψp, and Λ ¯ p systems produced in the B +→ J / ψ Λ¯ p decay are investigated and found to be inconsistent with the pure phase space hypothesis. The analysis is extended by using a model-independent angular amplitude analysis, which shows that the observed invariant mass distributions are consistent with the contributions from excited kaons decaying to the Λ ¯ p system. [Figure not available: see fulltext.