7 research outputs found

    Coupling of parts accelerating structures RFQ and DTL in one resonator prestripping section the heavy ion linear accelerator MILAC

    No full text
    New pre-stripping section (PSS-20) consists of two parts with diverse accelerating structures. On an initial part of acceleration of ions from 6 up to 150 keV/nucl. high capture in process of acceleration of the injected ions is provided interdigital (IH) accelerating structure with Radio-Frequency Quadrupole (RFQ) focusing. On the second part of acceleration of ions from 150 keV/nucl. up to 1 MeV/nucl. the highest rate of acceleration is created interdigital (IH) accelerating structure DTL. The problem of diverse accelerating structures combination in one resonator is set.Новая предобдирочная секция ПОС-20 состоит из двух участков с разнородными ускоряющими структурами. На начальном участке ускорения ионов от 6 до 150 кэВ/нукл. высокий захват в процесс ускорения обеспечивает встречно-штыревая ускоряющая структура с RFQ. На втором участке ускорения ионов от 150 кэВ/нукл. до 1 МэВ/нукл. высокий темп ускорения создаёт встречно-штыревая ускоряющая структура DTL. Поставлена задача совмещения таких разнородных ускоряющих структур в одном резонаторе.Нова передобдиркова секція ПОС-20 складається із двох ділянок з різнорідними прискорюючими струк-турами. На початковій ділянці прискорення іонів від 6 до 150 кеВ/нукл. високе захоплення в процес прискорення забезпечує зустрічно-штирьова прискорююча структура з RFQ. На другій ділянці прискорення іонів від 150 кеВ/нукл. до 1 МеВ/нукл. високий темп прискорення створює зустрічно-штирьова прискорююча структура DTL. Поставлено завдання суміщення таких різнорідних прискорюючих структур в одному резонаторі

    Changes of the radiation characteristics of surface of tungsten as a result of influence of helium ion beams

    Get PDF
    The change in the radiation characteristics of the surface of tungsten was studied. Helium ions beams with energies of 0.12 and 4 MeV were used. Curves of ionization and damage are got on length of free run of ions of helium. The change the radiation characteristics of the surface of tungsten was studied. In the case of treatment with a beam of helium ions with energies of 0.12 MeV an increase in the hardness of the tungsten surface was found. Bubbles development has been studied. The appearance of tungsten tendrils around the bubbles, the formation of hills and valleys was considered.Досліджувалася зміна радіаційних характеристик поверхні вольфраму. Застосовувалися пучки іонів гелію з енергіями 0,12 і 4 MеВ. Отримані криві іонізації і пошкоджень по довжині вільного пробігу іонів гелію. Знайдено збільшення твердості поверхні вольфрамової мішені в разі обробки пучком іонів гелію з енергією 0,12 MеВ. Вивчався розвиток бульбашок. Розглядалися поява вольфрамових вусиків, утворення горбів і долин.Исследовалось изменение радиационных характеристик поверхности вольфрама. Применялись пучки ионов гелия с энергиями 0,12 и 4 MэВ. Получены кривые ионизации и повреждений по длине свободного пробега ионов гелия. Найдено увеличение твердости поверхности вольфрамовой мишени в случае обработки пучком ионов гелия с энергией 0,12 MэВ. Изучалось развитие пузырьков. Рассматривались появление вольфрамовых усиков, образование холмов и долин

    Influence of helium ions beams with energies 0.12 MeV on sputtering process on surface of tungsten

    Get PDF
    The samples of tungsten with a purity of 99.5 and 99.7% were irradiated with helium ion beams (EHe⁺ = 0.12 MeV). The total sputtering coefficients for the sample depth up to 60 Å from the surface of sample were obtained. It was found that on the surface of tungsten, the number of pits (the flecking effect) significantly exceeds the number of bubbles (the blistering effect). The damage profiles of the surface of tungsten as a result of irradiation with helium ions are calculated. The areas of maximal display of effects of damage are determined.Проведено опромінення зразків вольфраму з чистотою 99,5 і 99,7% пучками іонів гелію (EHe⁺ = 0,12 МeВ). Отримано сумарні коефіцієнти розпилення за глибиною зразка до 60 Å від поверхні зразка. Знайдено, що на поверхні зразків вольфраму кількість ямок (ефект флекінгу) істотно перевищує кількість бульбашок (ефект блістерингу). Пораховані профілі пошкодження поверхні вольфраму в результаті опромінення іонами гелію. Визначено зони максимального прояву руйнівних ефектів

    A system for polymer film irradiation with heavy ions accelerated to the energy of 1 MeV/u

    No full text
    At the Kharkov heavy ion linear accelerator MILAC experimental investigations on irradiation polymer films with heavy ion beams are carried out with the aim of obtaining track-etched membranes. Presently, the MILAC prestripping section accelerates tripled-charged Ar₄₀³⁺ ions to the energy of 1 MeV/u with the intensity of 10⁹…10¹⁰ particles/s. To provide uniform track distribution with the specified density and orientation in the polymer film a system of ion irradiation was developed on the basis of electrostatic scanning deviceНа Харьковском линейном ускорителе тяжелых ионов ЛУМЗИ проводятся экспериментальные исследования по облучению пучками тяжелых ионов полимерной пленки для получения трековых мембран. В настоящее время предобдирочная секция ускорителя ЛУМЗИ ускоряет трехзарядные ионы аргона Ar₄₀³⁺ до энергии 1 МэВ/нуклон с интенсивностью 10⁹…10¹⁰ част./с. Для обеспечения равномерного распределения треков в полимерной пленке с заданной плотностью и направленностью треков разработана система ионного облучения. Работа выполнена по гранту №2476.На Харківському лінійному прискорювачі важких іонів ЛУМЗІ проводяться експериментальні дослідження по опроміненню пучками важких іонів полімерної плівки для одержання трекових мембран. На цей час передобдиркова секція прискорювача ЛУМЗІ прискорює тризарядні іони аргону Ar₄₀³⁺ до енергії 1 МеВ/нуклон з інтенсивністю 10⁹…10¹⁰ част./с. Для забезпечення рівномірного розподілу треків у полімерній плівці із заданою щільністю и спрямованістю треків розроблена система іонного опромінення. Робота виконана по гранту №2476

    Magnetohydrodynamic Waves in an Asymmetric Magnetic Slab

    Get PDF
    Analytical models of solar atmospheric magnetic structures have been crucial for our understanding of magnetohydrodynamic (MHD) wave behaviour and in the development of the field of solar magneto-seismology. Here, an analytical approach is used to derive the dispersion relation for MHD waves in a magnetic slab of homogeneous plasma enclosed on its two sides by non-magnetic, semi-infinite plasma with different densities and temperatures. This generalises the classic magnetic slab model, which is symmetric about the slab. The dispersion relation, unlike that governing a symmetric slab, cannot be decoupled into the well-known sausage and kink modes, i.e. the modes have mixed properties. The eigenmodes of an asymmetric magnetic slab are better labelled as quasi-sausage and quasi-kink modes. Given that the solar atmosphere is highly inhomogeneous, this has implications for MHD mode identification in a range of solar structures. A parametric analysis of how the mode properties (in particular the phase speed, eigenfrequencies, and amplitudes) vary in terms of the introduced asymmetry is conducted. In particular, avoided crossings occur between quasi-sausage and quasi-kink surface modes, allowing modes to adopt different properties for different parameters in the external region
    corecore