Corrosion behavior of ultrafine-grained AA2024 aluminum alloy produced by cryorolling.

The objectives of this study were to produce ultrafine-grained (UFG) AA2024 aluminum alloy by cryorolling followed by aging and to evaluate its corrosion behavior. Solutionized samples were cryorolled to ~85% reduction in thickness. Subsequent aging resulted in a UFG structure with finer precipitates of Al2CuMg in the cryorolled alloy. The (1) solutionized and (2) solutionized and cryorolled samples were uniformly aged at 160°C/24 h and were designated as CGPA and CRPA, respectively; these samples were subsequently subjected to corrosion studies. Potentiodynamic polarization studies in 3.5wt% NaCl solution indicated an increase in corrosion potential and a decrease in corrosion current density for CRPA compared to CGPA. In the case of CRPA, electrochemical impedance spectroscopic studies indicated the presence of two complex passive oxide layers with a higher charge transfer resistance and lower mass loss during intergranular corrosion tests. The improved corrosion resistance of CRPA was mainly attributed to its UFG structure, uniform distribution of fine precipitates, and absence of coarse grain-boundary precipitation and associated precipitate-free zones as compared with the CGPA alloy

High resolution infrared absorption spectra, crystal field, and relaxation processes in CsCdBr_3:Pr^3+

High resolution low-temperature absorption spectra of 0.2% Pr^3+ doped CsCdBr_3 were measured in the spectral region 2000--7000 cm-1. Positions and widths of the crystal field levels within the 3H5, 3H4, 3F2, and 3F3 multiplets of the Pr^3+ main center have been determined. Hyperfine structure of several spectral lines has been found. Crystal field calculations were carried out in the framework of the semiphenomenological exchange charge model (ECM). Parameters of the ECM were determined by fitting to the measured total splittings of the 3H4 and 3H6 multiplets and to the observed in this work hyperfine splittings of the crystal field levels. One- and two-phonon relaxation rates were calculated using the phonon Green's functions of the perfect (CsCdBr_3) and locally perturbed (impurity dimer centers in CsCdBr_3:Pr^3+) crystal lattice. Comparison with the measured linewidths confirmed an essential redistribution of the phonon density of states in CsCdBr_3 crystals doped with rare-earth ions.Comment: 16 pages, 5 tables, 3 figure

Magnetothermal Conductivity of Highly Oriented Pyrolytic Graphite in the Quantum Limit

We report on the magnetic field (0T$\le B \le 9$T) dependence of the longitudinal thermal conductivity $\kappa(T,B)$ of highly oriented pyrolytic graphite in the temperature range 5 K $\le T\le$ 20 K for fields parallel to the $c-$axis. We show that $\kappa(T,B)$ shows large oscillations in the high-field region (B > 2 T) where clear signs of the Quantum-Hall effect are observed in the Hall resistance. With the measured longitudinal electrical resistivity we show that the Wiedemann-Franz law is violated in the high-field regime.Comment: 4 Figures, to be published in Physical Review B (2003

Teleparallel Gravity and Dimensional Reductions of Noncommutative Gauge Theory

We study dimensional reductions of noncommutative electrodynamics on flat space which lead to gauge theories of gravitation. For a general class of such reductions, we show that the noncommutative gauge fields naturally yield a Weitzenbock geometry on spacetime and that the induced diffeomorphism invariant field theory can be made equivalent to a teleparallel formulation of gravity which macroscopically describes general relativity. The Planck length is determined in this setting by the Yang-Mills coupling constant and the noncommutativity scale. The effective field theory can also contain higher-curvature and non-local terms which are characteristic of string theory. Some applications to D-brane dynamics and generalizations to include the coupling of ordinary Yang-Mills theory to gravity are also described.Comment: 31 pages LaTeX; References adde

Engineering design of vertical test stand cryostat

Under Indian Institutions and Fermilab collaboration, Raja Ramanna Centre for Advanced Technology and Fermi National Accelerator Laboratory are jointly developing 2K Vertical Test Stand (VTS) cryostats for testing SCRF cavities at 2K. The VTS cryostat has been designed for a large testing aperture of 86.36 cm for testing of 325 MHz Spoke resonators, 650 MHz and 1.3 GHz multi-cell SCRF cavities for Fermilab's Project-X. Units will be installed at Fermilab and RRCAT and used to test cavities for Project-X. A VTS cryostat comprises of liquid helium (LHe) vessel with internal magnetic shield, top insert plate equipped with cavity support stand and radiation shield, liquid nitrogen (LN{sub 2}) shield and vacuum vessel with external magnetic shield. The engineering design and analysis of VTS cryostat has been carried out using ASME B&PV Code and Finite Element Analysis. Design of internal and external magnetic shields was performed to limit the magnetic field inside LHe vessel at the cavity surface <1 {micro}T. Thermal analysis for LN{sub 2} shield has been performed to check the effectiveness of LN{sub 2} cooling and for compliance with ASME piping code allowable stresses

Variability in energy expenditure is much greater in males than females

publishedVersionPaid open acces