1,510 research outputs found
Development of low Reynolds number two equation turbulence models for predicting external heat transfer on turbine blades
A research effort was underway to study the use of two equation low Reynolds number turbulence models in predicting gas side heat transfer on turbine blades. The major objectives of this work are basicly threefold: study the predictive capabilities of two equation low Reynolds number turbulence models under the conditions characteristic of modern gas turbine blades; explore potential improvements to the models themselves as well as to the specification of initial conditions; and provide a comparison of the predictions of these models with the experimental data from a broad range of recently available turbine cascade experiments. The problems associated with predicting the boundary layer transition from laminar to turbulent flow are emphasized, as this may be the most serious deficiency of current modeling techniques. The results and conclusions of the first two phases are briefly described
A low-Reynolds-number two-equation turbulence model for predicting heat transfer on turbine blades
A modified form of the Lam-Bremhorst low-Reynolds number kappa-epsilon turbulence model was developed for predicting transitional boundary layer flows under conditions characteristic of gas turbine blades. The application of the model to flows with pressure gradients is described. Tests against a number of turbine blade cascade data sets are included. Some additional refinements of the model that were made in recent months are explained
Development of generalized block correction procedures for the solution of discretized Navier-Stokes equations
Effort is directed towards developing a solution method which combines advantages of both the iterative and the direct methods. It involves iterative solution on the fine grid, convergence of which is enhanced by a direct solution for correction quantities on a coarse grid. The proposed block correction procedure was applied to compute recirculating flow in a driven cavity
Computation of Radiation Heat Transfer in Aeroengine Combustors
In this report the highlights of the research completed for the NASA are summarized. This research has been completed in the form of two Ph.D. theses by Chai (1994) and Parthasarathy (1996). Readers are referred to these theses for a complete details of the work and lists of references. In the following sections, first objectives of this research are introduced, then the finite-volume method for radiation heat transfer is described, and finally computations of radiative heat transfer in non-gray participating media is presented
Quasiequilibrium lattice Boltzmann models with tunable bulk viscosity for enhancing stability
Taking advantage of a closed-form generalized Maxwell distribution function [ P. Asinari and I. V. Karlin Phys. Rev. E 79 036703 (2009)] and splitting the relaxation to the equilibrium in two steps, an entropic quasiequilibrium (EQE) kinetic model is proposed for the simulation of low Mach number flows, which enjoys both the H theorem and a free-tunable parameter for controlling the bulk viscosity in such a way as to enhance numerical stability in the incompressible flow limit. Moreover, the proposed model admits a simplification based on a proper expansion in the low Mach number limit (LQE model). The lattice Boltzmann implementation of both the EQE and LQE is as simple as that of the standard lattice Bhatnagar-Gross-Krook (LBGK) method, and practical details are reported. Extensive numerical testing with the lid driven cavity flow in two dimensions is presented in order to verify the enhancement of the stability region. The proposed models achieve the same accuracy as the LBGK method with much rougher meshes, leading to an effective computational speed-up of almost three times for EQE and of more than four times for the LQE. Three-dimensional extension of EQE and LQE is also discussed
Improved numerical methods for turbulent viscous flows aerothermal modeling program, phase 2
The details of a study to develop accurate and efficient numerical schemes to predict complex flows are described. In this program, several discretization schemes were evaluated using simple test cases. This assessment led to the selection of three schemes for an in-depth evaluation based on two-dimensional flows. The scheme with the superior overall performance was incorporated in a computer program for three-dimensional flows. To improve the computational efficiency, the selected discretization scheme was combined with a direct solution approach in which the fluid flow equations are solved simultaneously rather than sequentially
Mathematical Models in Management Sciences. (1) - Consumer Behaviour as a Markov Process
Mathematical models based on Markov processes for consumer purchasing behavio
Analysis of plasma instabilities and verification of the BOUT code for the Large Plasma Device
The properties of linear instabilities in the Large Plasma Device [W.
Gekelman et al., Rev. Sci. Inst., 62, 2875 (1991)] are studied both through
analytic calculations and solving numerically a system of linearized
collisional plasma fluid equations using the 3D fluid code BOUT [M. Umansky et
al., Contrib. Plasma Phys. 180, 887 (2009)], which has been successfully
modified to treat cylindrical geometry. Instability drive from plasma pressure
gradients and flows is considered, focusing on resistive drift waves, the
Kelvin-Helmholtz and rotational interchange instabilities. A general linear
dispersion relation for partially ionized collisional plasmas including these
modes is derived and analyzed. For LAPD relevant profiles including strongly
driven flows it is found that all three modes can have comparable growth rates
and frequencies. Detailed comparison with solutions of the analytic dispersion
relation demonstrates that BOUT accurately reproduces all characteristics of
linear modes in this system.Comment: Published in Physics of Plasmas, 17, 102107 (2010
Two-Equation Low-Reynolds-Number Turbulence Modeling of Transitional Boundary Layer Flows Characteristic of Gas Turbine Blades
The use of low Reynolds number (LRN) forms of the k-epsilon turbulence model in predicting transitional boundary layer flow characteristic of gas turbine blades is developed. The research presented consists of: (1) an evaluation of two existing models; (2) the development of a modification to current LRN models; and (3) the extensive testing of the proposed model against experimental data. The prediction characteristics and capabilities of the Jones-Launder (1972) and Lam-Bremhorst (1981) LRN k-epsilon models are evaluated with respect to the prediction of transition on flat plates. Next, the mechanism by which the models simulate transition is considered and the need for additional constraints is discussed. Finally, the transition predictions of a new model are compared with a wide range of different experiments, including transitional flows with free-stream turbulence under conditions of flat plate constant velocity, flat plate constant acceleration, flat plate but strongly variable acceleration, and flow around turbine blade test cascades. In general, calculational procedure yields good agreement with most of the experiments
- …