Ionic Strength Responsive Sulfonated Polystyrene Opals

Stimuli-responsive photonic crystals (PCs) represent an intriguing class of smart materials very promising for sensing applications. Here, selective ionic strength responsive polymeric PCs are reported. They are easily fabricated by partial sulfonation of polystyrene opals, without using toxic or expensive monomers and etching steps. The color of the resulting hydrogel-like ordered structures can be continuously shifted over the entire visible range (405-760 nm) by changing the content of ions over an extremely wide range of concentration (from about 70 μM to 4 M). The optical response is completely independent from pH and temperature, and the initial color can be fully recovered by washing the sulfonated opals with pure water. These new smart photonic materials could find important applications as ionic strength sensors for environmental monitoring as well as for healthcare screening

Ultrathin, Ultra‐Conformable, and Free‐Standing Tattooable Organic Light‐Emitting Diodes

A novel tattooable, ultrathin, green organic light‐emitting diode (OLED) fabricated on top of commercial temporary tattoo paper, is demonstrated. The transfer mechanism relies on dissolution of the sacrificial layer typically incorporated in paper‐tattoos. The ready‐to‐use device can be stored on the tattoo substrate and released on the target surface at a later time, simply by a slight wetting of the tattoo paper with water. This approach provides a quick and easy method of transferring OLEDs on virtually any surface. This is particularly appealing, in perspective, for on‐skin and disposable electronic applications. The proof of concept demonstrates, for the very first time, the feasibility of ultrathin operational OLED tattoos. While the performance of such devices is not yet comparable with that of OLEDs on rigid or flexible non‐tattooable substrates, the results show the potential for an OLED tattoo technology in integrated conformable electronic circuits

Air Trapping Mechanism in Artificial Salvinia-Like Micro-Hairs Fabricated via Direct Laser Lithography

Salvinia leaves represent an extraordinary example of how nature found a strategy for the long term retainment of air, and thus oxygen, on a surface, the so-called ‘Salvinia effect’, thanks to the peculiar three-dimensional and hierarchical shape of the hairs covering the leaves. Here, starting from the natural model, we have microfabricated hairs inspired by those present on the Salvinia molesta leaves, by means of direct laser lithography. Artificial hairs, like their natural counterpart, are composed of a stalk and a crown-like head, and have been reproduced in the microscale since this ensures, if using a proper design, an air-retaining behavior even if the bulk structural material is hydrophilic. We have investigated the capability of air retainment inside the heads of the hairs that can last up to 100 h, demonstrating the stability of the phenomenon. For a given dimension of the head, the greater the number of filaments, the greater the amount of air that can be trapped inside the heads since the increase in the number of solid–air interfaces able to pin the liquid phase. For this reason, such type of pattern could be used for the fabrication of surfaces for controlled gas retainment and gas release in liquid phases. The range of applications would be quite large, including industrial, medical, and biological fields

3D Micropatterned Surface Inspired by Salvinia molesta via Direct Laser Lithography

Biomimetic functional surfaces are attracting increasing attention for their relevant technological applications. Despite these efforts, inherent limitations of microfabrication techniques prevent the replication of complex hierarchical microstructures. Using a 3D laser lithography technique, we fabricated a 3D patterned surface bioinspired to Salvinia molesta leaves. The artificial hairs, with crownlike heads, were reproduced by scaling down (ca. 100 times smaller) the dimensions of natural features, so that microscale hairs with submicrometric resolution were attained. The micropatterned surface, in analogy with the natural model, shows interesting properties in terms of hydrophobicity and air retention when submerged by water, even if realized with a hydrophilic material. Furthermore, we successfully demonstrated the capability to promote localized condensation of water droplets from moisture in the atmosphere

A sub-150-nanometre-thick and ultraconformable solution-processed all-organic transistor

Recent advancements in the field of electronics have paved the way to the development of new applications, such as tattoo electronics, where the employment of ultraconformable devices is required, typically achievable with a significant reduction in their total thickness. Organic materials can be considered enablers, owing to the possibility of depositing films with thicknesses at the nanometric scale, even from solution. However, available processes do not allow obtaining devices with thicknesses below hundreds of nanometres, thus setting a limit. Here, we show an all-organic field effect transistor that is less than 150 nm thick and that is fabricated through a fully solution-based approach. Such unprecedented thickness permits the device to conformally adhere onto nonplanar surfaces, such as human skin, and to be bent to a radius lower than 1 μm, thereby overcoming another limitation for field-effect transistors and representing a fundamental advancement in the field of ultrathin and tattoo electronics

Plasmonic/magnetic nanocomposites: Gold nanorods-functionalized silica coated magnetic nanoparticles

: We report here on the fabrication of a new example of nano-object that combines magnetic and plasmonic properties. The strategy is based on the electrostatic assembly of negatively charged gold nanorods (NIR-resonant) on positively charged silica-coated iron oxide nanoparticles. Silica coating of magnetic nanoparticles prevented iron oxide nanoparticles irreversible aggregation in water environment. Finally the stability of the nanocomposite in biological medium has been improved through a protein coating (BSA, bovine serum albumin). Morphological, optical and magnetic properties of the hybrid nanomaterials have been evaluated as well as its ability to be manipulated by an external magnetic field. Furthermore, temperature characterization upon NIR laser excitation has been performed in order to assess nanocomposite capability of increasing local environmental temperature. This nanomaterial could be used as a smart tool for photothermal treatment of cancerous lesions in order to maximize precision and efficacy of tissue heating upon laser stimulation by magnetically accumulating nanoparticles nearby the cancerous lesion, avoiding dispersion of the nanomaterial

Barium titanate nanoparticles and hypergravity stimulation improve differentiation of mesenchymal stem cells into osteoblasts.

BACKGROUND: Enhancement of the osteogenic potential of mesenchymal stem cells (MSCs) is highly desirable in the field of bone regeneration. This paper proposes a new approach for the improvement of osteogenesis combining hypergravity with osteoinductive nanoparticles (NPs). MATERIALS AND METHODS: In this study, we aimed to investigate the combined effects of hypergravity and barium titanate NPs (BTNPs) on the osteogenic differentiation of rat MSCs, and the hypergravity effects on NP internalization. To obtain the hypergravity condition, we used a large-diameter centrifuge in the presence of a BTNP-doped culture medium. We analyzed cell morphology and NP internalization with immunofluorescent staining and coherent anti-Stokes Raman scattering, respectively. Moreover, cell differentiation was evaluated both at the gene level with quantitative real-time reverse-transcription polymerase chain reaction and at the protein level with Western blotting. RESULTS: Following a 20 g treatment, we found alterations in cytoskeleton conformation, cellular shape and morphology, as well as a significant increment of expression of osteoblastic markers both at the gene and protein levels, jointly pointing to a substantial increment of NP uptake. Taken together, our findings suggest a synergistic effect of hypergravity and BTNPs in the enhancement of the osteogenic differentiation of MSCs. CONCLUSION: The obtained results could become useful in the design of new approaches in bone-tissue engineering, as well as for in vitro drug-delivery strategies where an increment of nanocarrier internalization could result in a higher drug uptake by cell and/or tissue constructs