13 research outputs found
Modification of the zirconia ceramics by different calcium phosphate coatings:comparative study
The aim of this study was to characterize different calcium phosphate
coatings and evaluate in vitro cell response of these materials to ceramics
implants. The physical and chemical properties of calcium phosphate coatings
formed by RF-magnetron sputtering of calcium phosphate tribasic,
hydroxyapatite, calcium phosphate monobasic, calcium phosphate dibasic
dihydrate and calcium pyrophosphate powders were characterized. Cell adhesion
and cell viability were examined on calcium phosphate coatings using
mesenchymal stem cells. The results of cytotoxicity measurements of the calcium
phosphate coatings revealed that only the coating obtained by RF-magnetron
sputtering of the calcium phosphate dibasic dihydrate and calcium phosphate
tribasic powders possessed lower cell viability than the zirconia substrate.
The coating formed by sputtering of the calcium phosphate tribasic powder
demonstrated more cells adhered onto its surface compared with other calcium
phosphate coatings
Fabrication and properties of L-arginine-doped PCL electrospun composite scaffolds
The article describes fabrication and properties of composite fibrous
scaffolds obtained by electrospinning of the solution of
poly({\epsilon}-caprolactone) and arginine in common solvent. The influence of
arginine content on structure, mechanical, surface and biological properties of
the scaffolds was investigated. It was found that with an increase of arginine
concentration diameter of the scaffold fibers was reduced, which was
accompanied by an increase of scaffold strength and Young modulus. It was
demonstrated that porosity and water contact angle of the scaffold are
independent from arginine content. The best cell adhesion and viability was
shown on scaffolds with arginine concentration from 0.5 to 1 % wt
Modification of the zirconia ceramics by different calcium phosphate coatings:comparative study
The aim of this study was to characterize different calcium phosphate
coatings and evaluate in vitro cell response of these materials to ceramics
implants. The physical and chemical properties of calcium phosphate coatings
formed by RF-magnetron sputtering of calcium phosphate tribasic,
hydroxyapatite, calcium phosphate monobasic, calcium phosphate dibasic
dihydrate and calcium pyrophosphate powders were characterized. Cell adhesion
and cell viability were examined on calcium phosphate coatings using
mesenchymal stem cells. The results of cytotoxicity measurements of the calcium
phosphate coatings revealed that only the coating obtained by RF-magnetron
sputtering of the calcium phosphate dibasic dihydrate and calcium phosphate
tribasic powders possessed lower cell viability than the zirconia substrate.
The coating formed by sputtering of the calcium phosphate tribasic powder
demonstrated more cells adhered onto its surface compared with other calcium
phosphate coatings
Conversion of Phenol and Lignin as Components of Renewable Raw Materials on Pt and Ru-Supported Catalysts
Hydrogenation of phenol in aqueous solutions on Pt-Ni/SiO2, Pt-Ni-Cr/Al2O3, Pt/C, and Ru/C catalysts was studied at temperatures of 150–250 °C and pressures of 40–80 bar. The possibility of hydrogenation of hydrolysis lignin in an aqueous medium in the presence of a Ru/C catalyst is shown. The conversion of hydrolysis lignin and water-soluble sodium lignosulfonate occurs with the formation of a complex mixture of monomeric products: a number of phenols, products of their catalytic hydrogenation (cyclohexanol and cyclohexanone), and hydrogenolysis products (cyclic and aliphatic C2–C7 hydrocarbons)
Biophysical Characterization and Cytocompatibility of Cellulose Cryogels Reinforced with Chitin Nanowhiskers
Polysaccharide-based cryogels are promising materials for producing scaffolds in tissue engineering. In this work, we obtained ultralight (0.046–0.162 g/cm3) and highly porous (88.2–96.7%) cryogels with a complex hierarchical morphology by dissolving cellulose in phosphoric acid, with subsequent regeneration and freeze-drying. The effect of the cellulose dissolution temperature on phosphoric acid and the effect of the freezing time of cellulose hydrogels on the structure and properties of the obtained cryogels were studied. It has been shown that prolonged freezing leads to the formation of denser and stronger cryogels with a network structure. The incorporation of chitin nanowhiskers led to a threefold increase in the strength of the cellulose cryogels. The X-ray diffraction method showed that the regenerated cellulose was mostly amorphous, with a crystallinity of 26.8–28.4% in the structure of cellulose II. Cellulose cryogels with chitin nanowhiskers demonstrated better biocompatibility with mesenchymal stem cells compared to the normal cellulose cryogels
Bacterial Cellulose (Komagataeibacter rhaeticus) Biocomposites and Their Cytocompatibility
A series of novel polysaccharide-based biocomposites was obtained by impregnation of bacterial cellulose produced by Komagataeibacter rhaeticus (BC) with the solutions of negatively charged polysaccharides—hyaluronan (HA), sodium alginate (ALG), or κ-carrageenan (CAR)—and subsequently with positively charged chitosan (CS). The penetration of the polysaccharide solutions into the BC network and their interaction to form a polyelectrolyte complex changed the architecture of the BC network. The structure, morphology, and properties of the biocomposites depended on the type of impregnated anionic polysaccharides, and those polysaccharides in turn determined the nature of the interaction with CS. The porosity and swelling of the composites increased in the order: BC–ALG–CS > BC–HA–CS > BC–CAR–CS. The composites show higher biocompatibility with mesenchymal stem cells than the original BC sample, with the BC–ALG–CS composite showing the best characteristics
Modification of the Ceramic Implant Surfaces from Zirconia by the Magnetron Sputtering of Different Calcium Phosphate Targets: A Comparative Study
In this study, thin calcium phosphate (Ca-P) coatings were deposited on zirconia substrates by radiofrequency (RF) magnetron sputtering using different calcium phosphate targets (calcium phosphate tribasic (CPT), hydroxyapatite (HA), calcium phosphate monobasic, calcium phosphate dibasic dehydrate (DCPD) and calcium pyrophosphate (CPP) powders). The sputtering of calcium phosphate monobasic and DCPD powders was carried out without an inert gas in the self-sustaining plasma mode. The physico-chemical, mechanical and biological properties of the coatings were investigated. Cell adhesion on the coatings was examined using mesenchymal stem cells (MSCs). The CPT coating exhibited the best cell adherence among all the samples, including the uncoated zirconia substrate. The cells were spread uniformly over the surfaces of all samples