806 research outputs found
Оптична система виявлення динамічних об'єктів для БПЛА
This work presents an optical flow based method for obstacle detection by using a single CCDcamera. Computed optical flow is used to detect dynamic obstacles in front of the camera and toadjust rotor's control to avoid them. The proposed system is based on optical flow estimation with weighted image blocks from the streamed video. Hardware simulation is performed to prove theapplicability of this system. Methods and algorithms described in this paper are versatile enough andcan be implemented for various vehicles with autonomous navigation system. The feasibility of theproposed system for UAVs is discussedВ работе представлена технология на основе метода оптического потока ПЗС-камеры. Оптический поток используется для обнаружения динамических препятствий перед камерой, спомощью которого формируется сигнал управления на облет препятствия. Предлагаемая система основана на оценке оптического потока с взвешенными блоков изображения в потоко-вый видеопоследовательности. Проведенные практические испытания доказывают работоспособность этой системы. Методы и алгоритмы, описанные в данной роботе, являются достаточно универсальными и реализуются в различных областях, которые используют автономную систему навигации. Система разрабатывалась для использования на БПЛАУ роботі представлена технологія на основі методу оптичного потоку ПЗС-камери. Оптичний потік використовується для виявлення динамічних перешкод перед камерою, за допомогою якого формується сигнал управління на обліт перешкоди. Пропонована система заснована наоцінці оптичного потоку з зваженими блоків зображення в потоковій відео послідовності. Проведені практичні випробування доводять робото спроможність цієї системи. Методи і алгоритми, описані в даній роботі, є досить універсальними і реалізуються в різних областях, які використовують автономну систему навігації. Система розробляється для використанняна БПЛ
A direction finding technique for the ULF electromagnetic source
International audienceA technique of direction finding is proposed, which can be applied to the magnetic-dipole type source located in the conductive ground. To distinguish a weak ULF source signal from the natural noise a network of multicomponent magnetometers is supposed to be used. The data obtained by the ground-based stations is processed in such a way that a set of partial derivatives of the magnetic perturbations due to the source are found. Comparing these derivatives with theoretical formulae makes it possible, in principle, to find the ULF source parameters such as the distance and amplitude. Averaging the data and a special procedure are proposed in order to exclude random fluctuations in the magnetic moment orientation and to avoid hydrogeological and other local factors
Use of iodine and selenium enriched fodder rations for production of fortified young lamb
The article is devoted to preventive measures to eliminate the problem of dysmicroelementosis in order to increase the productivity of young sheep. The article presents the results of studies of the influence of feeding rations on the growth and development of young sheep of the Edilbaev breed, on the level of their meat productivity and the qualitative characteristics of biologically fortified lamb. Feed additives based on Yoddar-Zn and DAFS-25 were added to the main ration of lambs at the age of four months, once a day, being added into a fodder mixture with concentrates. For the experiment the herd of lambs was divided to four groups of 25 heads each.The changes in live weight at the age of four, five, six and seven months were analyzed, and it was found that at the age of seven months, the absolute average weight gain in the experimental groups varied from 3.45 kg to 4.49 kg, in the control group it was 3.1 kg, while the largest live weight gain was recorded in group III which received both feed additives based on Yoddar-Zn and DAFS-25.There were no significant differences in the parameters of body measurements, with the exception of group III, where the chest circumference increased by 7.2%, and the height of a lamb at the withers increased in average by 8.1%. It was found that group III had the highest meat density coefficient, equal to 3.9, and the cross-sectional area of m. Longissimus dorsi was equal to 13.61 cm2. It was noted that the amount of free amino acids of the lamb group III is 18.8% higher than the meat of the control group. The lamb obtained from the animals of the experimental groups showed a higher protein content and less fat. The ratio of water to protein in all samples was slightly higher than 3.7, which corresponds to the Federa number for meat raw materials. Enriching the rations of the Edilbaevskoy sheep with feed additives Yoddar-Zn and DAFS-25 promotes the stimulation of growth and development of animals, increases the productivity and nutritional value of lamb
- …