Quantitative localized proton-promoted dissolution kinetics of calcite using scanning electrochemical microscopy (SECM)

Scanning electrochemical microscopy (SECM) has been used to determine quantitatively the kinetics of proton-promoted dissolution of the calcite (101̅4) cleavage surface (from natural “Iceland Spar”) at the microscopic scale. By working under conditions where the probe size is much less than the characteristic dislocation spacing (as revealed from etching), it has been possible to measure kinetics mainly in regions of the surface which are free from dislocations, for the first time. To clearly reveal the locations of measurements, studies focused on cleaved “mirror” surfaces, where one of the two faces produced by cleavage was etched freely to reveal defects intersecting the surface, while the other (mirror) face was etched locally (and quantitatively) using SECM to generate high proton fluxes with a 25 μm diameter Pt disk ultramicroelectrode (UME) positioned at a defined (known) distance from a crystal surface. The etch pits formed at various etch times were measured using white light interferometry to ascertain pit dimensions. To determine quantitative dissolution kinetics, a moving boundary finite element model was formulated in which experimental time-dependent pit expansion data formed the input for simulations, from which solution and interfacial concentrations of key chemical species, and interfacial fluxes, could then be determined and visualized. This novel analysis allowed the rate constant for proton attack on calcite, and the order of the reaction with respect to the interfacial proton concentration, to be determined unambiguously. The process was found to be first order in terms of interfacial proton concentration with a rate constant k = 6.3 (± 1.3) × 10–4 m s–1. Significantly, this value is similar to previous macroscopic rate measurements of calcite dissolution which averaged over large areas and many dislocation sites, and where such sites provided a continuous source of steps for dissolution. Since the local measurements reported herein are mainly made in regions without dislocations, this study demonstrates that dislocations and steps that arise from such sites are not needed for fast proton-promoted calcite dissolution. Other sites, such as point defects, which are naturally abundant in calcite, are likely to be key reaction sites

Globalisation masculinities, empire building and forced prostitution: a critical analysis of the gendered impact of the neoliberal economic agenda in post-invasion/occupation Iraq

Adopting a transnational feminist lens and using a political economy approach, this article addresses both the direct and indirect consequences of the 2003 war in Iraq, specifically the impact on civilian women. Pre-war security and gender relations in Iraq will be compared with the situation post-invasion/occupation. The article examines the globalised processes of capitalism, neoliberalism and neo-colonialism and their impact on the political, social and economic infrastructure in Iraq. Particular attention will be paid to illicit and informal economies: coping, combat and criminal. The 2003 Iraq war was fought using masculinities of empire, post-colonialism and neoliberalism. Using the example of forced prostitution, the article will argue that these globalisation masculinities – specifically the privatisation agenda of the West and its illegal economic occupation – have resulted in women either being forced into the illicit (coping) economy as a means of survival, or trafficked for sexual slavery by profit-seeking criminal networks who exploit the informal economy in a post-invasion/occupation Iraq

The disappearance and reappearance of optical emission lines and the drop in a Swift/XRT count rate during the recent rebrightening of TCP J21040470+4631129

We report the results of our continuing optical and X-ray monitoring of the bright WZ Sge-type dwarf nova TCP J21040470+4631129 (hereafter TCP2104) discovered on July 12, 2019 (for previous reports, see ATel #12947, #13009). Our optical photometric observations are mostly performed using 30-cm class telescopes, while spectroscopic data are obtained with the 2.1-m telescope at the OAN-SPM, the 2.5-m Isaac Newton Telescope on La Palma, and other smaller telescopes.peer-reviewe

How do you know if you are any good? A surgeon performance feedback system for the outcomes of radical prostatectomy

Surgery remains a mainstay of initial treatment for prostate cancer, with an estimated 85,000 operations per year in the US. Radical prostatectomy is associated with important risks of erectile dysfunction, urinary incontinence and, naturally, cancer recurrence. Given the possible consequences, it would be reassuring were it known that urologic surgeons offer uniformly high-quality care. Unfortunately, the data suggest that this is far from the case. There is copious evidence that surgeons with greater case volume or total lifetime experience have better outcomes. For example, low volume surgeons have complication rates 6 to 8% greater than their higher volume counterparts; in studies on the learning curve, the risk of recurrence is about 7% higher for a typical patient treated by an inexperienced surgeon than if treated by a more experienced surgeon There are also data that differences in outcome go over and above characteristics such as volume or experience, with large variations between surgeons even within volume categories, with one study reporting a five-fold variation in potency rates between surgeons at a single institution

Tool wear monitoring using neuro-fuzzy techniques: a comparative study in a turning process

Tool wear detection is a key issue for tool condition monitoring. The maximization of useful tool life is frequently related with the optimization of machining processes. This paper presents two model-based approaches for tool wear monitoring on the basis of neuro-fuzzy techniques. The use of a neuro-fuzzy hybridization to design a tool wear monitoring system is aiming at exploiting the synergy of neural networks and fuzzy logic, by combining human reasoning with learning and connectionist structure. The turning process that is a well-known machining process is selected for this case study. A four-input (i.e., time, cutting forces, vibrations and acoustic emissions signals) single-output (tool wear rate) model is designed and implemented on the basis of three neuro-fuzzy approaches (inductive, transductive and evolving neuro-fuzzy systems). The tool wear model is then used for monitoring the turning process. The comparative study demonstrates that the transductive neuro-fuzzy model provides better error-based performance indices for detecting tool wear than the inductive neuro-fuzzy model and than the evolving neuro-fuzzy model

Comparing Open Radical Cystectomy and Robot-assisted Laparoscopic Radical Cystectomy: A Randomized Clinical Trial

Background: Open radical cystectomy (ORC) and urinary diversion in patients with bladder cancer (BCa) are associated with significant perioperative complication risk. Objective: To compare perioperative complications between robot-assisted radical cystectomy (RARC) and ORC techniques. Design, setting, and participants: A prospective randomized controlled trial was conducted during 2010 and 2013 in BCa patients scheduled for definitive treatment by radical cystectomy (RC), pelvic lymph node dissection (PLND), and urinary diversion. Patients were randomized to ORC/PLND or RARC/PLND, both with open urinary diversion. Patients were followed for 90 d postoperatively. Intervention: Standard ORC or RARC with PLND; all urinary diversions were performed via an open approach. Outcome measurements and statistical analysis: Primary outcomes were overall 90-d grade 2-5 complications defined by a modified Clavien system. Secondary outcomes included comparison of high-grade complications, estimated blood loss, operative time, pathologic outcomes, 3-and 6-mo patient-reported quality-of-life (QOL) outcomes, and total operative room and inpatient costs. Differences in binary outcomes were assessed with the chi-square test, with differences in continuous outcomes assessed by analysis of covariance with randomization group as covariate and, for QOL end points, baseline score. Results and limitations: The trial enrolled 124 patients, of whom 118 were randomized and underwent RC/PLND. Sixty were randomized to RARC and 58 to ORC. At 90 d, grade 2-5 complications were observed in 62% and 66% of RARC and ORC patients, respectively (95% confidence interval for difference, -21% to -13%; p = 0.7). The similar rates of grade 2-5 complications at our mandated interim analysis met futility criteria; thus, early closure of the trial occurred. The RARC group had lower mean intraoperative blood loss (p = 0.027) but significantly longer operative time than the ORC group (p \u3c 0.001). Pathologic variables including positive surgical margins and lymph node yields were similar. Mean hospital stay was 8 d in both arms (standard deviation, 3 and 5 d, respectively; p = 0.5). Three-and 6-mo QOL outcomes were similar between arms. Cost analysis demonstrated an advantage to ORC compared with RARC. A limitation is the setting at a single high-volume, referral center; our findings may not be generalizable to all settings. Conclusions: This trial failed to identify a large advantage for robot-assisted techniques over standard open surgery for patients undergoing RC/PLND and urinary diversion. Similar 90-d complication rates, hospital stay, pathologic outcomes, and 3-and 6-mo QOL outcomes were observed regardless of surgical technique. Patient summary: Of 118 patients with bladder cancer who underwent radical cystectomy, pelvic lymph node dissection, and urinary diversion, half were randomized to open surgery and half to robot-assisted laparoscopic surgery. We compared the rate of complications within 90 d after surgery for the open group versus the robotic group and found no significant difference between the two groups. Trial Registration: ClinicalTrials. gov identifier NCT01076387, www.clinicaltrials.gov. (C) 2014 European Association of Urology. Published by Elsevier B.V. All rights reserved

Pionic contribution to relativistic Fermi Liquid parameters

We calculate pionic contribution to the relativistic Fermi Liquid parameters (RFLPs) using Chiral Effective Lagrangian. The RFLPs so determined are then used to calculate chemical potential, exchange and nuclear symmetry energies due to $\pi$$N$ interaction. We also evaluate two loop ring diagrams involving $\sigma$, $\omega$ and $\pi$ meson exchanges and compare results with what one obtains from the relativistic Fermi Liquid theory (RFLT).Comment: 6 pages, 2 figures, Published in Canadian Journal of Physics, vol. 88, issue 8, pp. 585-59