350 research outputs found
Forced desorption of nanoparticles from an oil-water interface.
While nanoparticle adsorption to fluid interfaces has been studied from a fundamental standpoint and exploited in application, the reverse process, that is, desorption and disassembly, remains relatively unexplored. Here we demonstrate the forced desorption of gold nanoparticles capped with amphiphilic ligands from an oil-water interface. A monolayer of nanoparticles is allowed to spontaneously form by adsorption from an aqueous suspension onto a drop of oil and is subsequently compressed by decreasing the drop volume. The surface pressure is monitored by pendant drop tensiometry throughout the process. Upon compression, the nanoparticles are mechanically forced out of the interface into the aqueous phase. An optical method is developed to measure the nanoparticle area density in situ. We show that desorption occurs at a coverage that corresponds to close packing of the ligand-capped particles, suggesting that ligand-induced repulsion plays a crucial role in this process. © 2011 American Chemical Society
Selective flow-induced vesicle rupture to sort by membrane mechanical properties
International audienceVesicle and cell rupture caused by large viscous stresses in ultrasonication is central to biomedical and bioprocessing applications. The flow-induced opening of lipid membranes can be exploited to deliver drugs into cells, or to recover products from cells, provided that it can be obtained in a controlled fashion. Here we demonstrate that differences in lipid membrane and vesicle properties can enable selective flow-induced vesicle break-up. We obtained vesicle populations with different membrane properties by using different lipids (SOPC, DOPC, or POPC) and lipid:cholesterol mixtures (SOPC:chol and DOPC:chol). We subjected vesicles to large deformations in the acoustic microstreaming flow generated by ultrasound-driven microbubbles. By simultaneously deforming vesicles with different properties in the same flow, we determined the conditions in which rupture is selective with respect to the membrane stretching elasticity. We also investigated the effect of vesicle radius and excess area on the threshold for rupture, and identified conditions for robust selectivity based solely on the mechanical properties of the membrane. Our work should enable new sorting mechanisms based on the difference in membrane composition and mechanical properties between different vesicles, capsules, or cells
Surface waves on a soft viscoelastic layer produced by an oscillating microbubble
Ultrasound-driven bubbles can cause significant deformation of soft viscoelastic layers, for instance in surface cleaning and biomedical applications. The effect of the viscoelastic properties of a boundary on the bubble-boundary interaction has been explored only qualitatively, and remains poorly understood. We investigate the dynamic deformation of a viscoelastic layer induced by the volumetric oscillations of an ultrasound-driven microbubble. High-speed video microscopy is used to observe the deformation produced by a bubble oscillating at 17-20 kHz in contact with the surface of a hydrogel. The localised oscillating pressure applied by the bubble generates surface elastic (Rayleigh) waves on the gel, characterised by elliptical particle trajectories. The tilt angle of the elliptical trajectories varies with increasing distance from the bubble. Unexpectedly, the direction of rotation of the surface elements on the elliptical trajectories shifts from prograde to retrograde at a distance from the bubble that depends on the viscoelastic properties of the gel. To explain these behaviours, we develop a simple three-dimensional model for the deformation of a viscoelastic solid by a localised oscillating force. By using as input for the model the values of the shear modulus obtained from the propagation velocity of the Rayleigh waves, we find good qualitative agreement with the experimental observations
Shape oscillations of particle-coated bubbles and directional particle expulsion
Bubbles stabilised by colloidal particles can find applications in advanced materials, catalysis and drug delivery. For applications in controlled release, it is desirable to remove the particles from the interface in a programmable fashion. We have previously shown that ultrasound waves excite volumetric oscillations of particle-coated bubbles, resulting in precisely timed particle expulsion due to interface compression on a ultrafast timescale [Poulichet et al., Proc. Natl. Acad. Sci. USA, 2015, 112, 5932]. We also observed shape oscillations, which were found to drive directional particle expulsion from the antinodes of the non-spherical deformation. In this paper we investigate the mechanisms leading to directional particle expulsion during shape oscillations of particle-coated bubbles driven by ultrasound at 40 kHz. We perform high-speed visualisation of the interface shape and of the particle distribution during ultrafast deformation at a rate of up to 105 s −1 . The mode of shape oscillations is found to not depend on the bubble size, in contrast with what has been reported for uncoated bubbles. A decomposition of the non-spherical shape in spatial Fourier modes reveals that the interplay of different modes determines the locations of particle expulsion. The n-fold symmetry of the dominant mode does not always lead to desorption from all 2n antinodes, but only those where there is favourable alignment with the sub-dominant modes. Desorption from the antinodes of the shape oscillations is due to different, concurrent mechanisms. The radial acceleration of the interface at the antinodes can be up to 105 − 106 ms−2 , hence there is a contribution from the inertia of the particles localised at the antinodes. In addition, we found that particles migrate to the antinodes of the shape oscillation, thereby enhancing the contribution from the surface pressure in the monolayer
Microporous polymer particles via phase inversion in microfluidics: impact of non-solvent quality
We investigate the impact of ternary phase behavior on the microstructure of porous polymer particles produced by solvent extraction of polymer solution droplets by a nonsolvent. Microfluidic devices fabricated by frontal photopolymerization are employed to produce monodisperse polymer (P)/solvent (S) droplets suspended in a carrier (C) phase before inducing solvent extraction by precipitation in a nonsolvent (NS) bath. Model systems of sodium poly(styrenesulfonate) (P), water (S), hexadecane (C), and either methyl ethyl ketone (MEK) or ethyl acetate (EA) as NS are selected. Extraction across the liquid–liquid interface results in a decrease in the droplet radius and also an ingress of nonsolvent, leading to droplet phase demixing and coarsening. As the concentration of the polymer-rich phase increases, droplet shrinkage and solvent exchange slow down and eventually cease, resulting in microporous polymer particles (of radius ≃50–200 μm) with a smooth surface. The internal structure of these capsules, with pore sizes of ≃1–100 μm, is found to be controlled by polymer solution thermodynamics and the extraction pathway. The ternary phase diagrams are measured by turbidimetry, and the kinetics of phase separation is estimated by stopped-flow small-angle neutron scattering. The higher solubility of water in MEK results in faster particle-formation kinetics than in EA. Surprisingly, however, the lower polymer miscibility with EA/water results in a deeper quench inside the phase boundary and small phase sizes, thus yielding particles with small pores (of narrow distribution). The effects of droplet size, polymer content, and nonsolvent quality provide comprehensive insight into porous particle and capsule formation by phase inversion, with a range of practical applications
Nonuniform collective dissolution of bubbles in regular pore networks
Understanding the evolution of solute concentration gradients underpins the prediction of porous media processes limited by mass transfer. Here, we present the development of a mathematical model that describes the dissolution of spherical bubbles in two-dimensional regular pore networks. The model is solved numerically for lattices with up to 169 bubbles by evaluating the role of pore network connectivity, vacant lattice sites and the initial bubble size distribution. In dense lattices, diffusive shielding prolongs the average dissolution time of the lattice, and the strength of the phenomenon depends on the network connectivity. The extension of the final dissolution time relative to the unbounded (bulk) case follows the power-law function, Bk/ℓ, where the constant ℓ is the inter-bubble spacing, B is the number of bubbles, and the exponent k depends on the network connectivity. The solute concentration field is both the consequence and a factor affecting bubble dissolution or growth. The geometry of the pore network perturbs the inward propagation of the dissolution front and can generate vacant sites within the bubble lattice. This effect is enhanced by increasing the lattice size and decreasing the network connectivity, yielding strongly nonuniform solute concentration fields. Sparse bubble lattices experience decreased collective effects, but they feature a more complex evolution, because the solute concentration field is nonuniform from the outset
Dynamic organization of ligand-grafted nanoparticles during adsorption and surface compression at fluid-fluid interfaces
Monolayers of ligand-grafted nanoparticles at fluid interfaces exhibit a complex response to deformation due to an interplay of particle rearrangements within the monolayer, and molecular rearrangements of the ligand brush on the surface of the particles. We use grazing-incidence small-angle X-ray scattering (GISAXS) combined with pendant drop tensiometry to probe in situ the dynamic organization of ligand-grafted nanoparticles upon adsorption at a fluid–fluid interface, and during monolayer compression. Through the simultaneous measurements of interparticle distance, obtained from GISAXS, and of surface pressure, obtained from pendant drop tensiometry, we link the interfacial stress to the monolayer microstructure. The results indicate that, during adsorption, the nanoparticles form rafts that grow while the interparticle distance remains constant. For small-amplitude, slow compression of the monolayer, the evolution of the interparticle distance bears a signature of ligand rearrangements leading to a local decrease in thickness of the ligand brush. For large-amplitude compression, the surface pressure is found to be strongly dependent on the rate of compression. Two-dimensional Brownian dynamics simulations show that the rate-dependent features are not due to jamming of the monolayer, and suggest that they may be due to out-of-plane reorganization of the particles (for instance expulsion or buckling). The corresponding GISAXS patterns are also consistent with out-of-plane reorganization of the nanoparticles
Stability of bubbles in wax-based oleofoams: decoupling the effects of bulk oleogel rheology and interfacial rheology
Oleofoams are dispersions of gas bubbles in a continuous oil phase and can be stabilized by crystals of fatty acids or waxes adsorbing at the oil-air interface. Because excess crystals in the continuous phase form an oleogel, an effect of the bulk rheology of the continuous phase is also expected. Here, we evaluate the contributions of bulk and interfacial rheology below and above the melting point of a wax forming an oleogel in sunflower oil. We study the dissolution behaviour of single bubbles using microscopy on a temperature-controlled stage. We compare the behaviour of a bubble embedded in an oleofoam, which owes its stability to both bulk and interfacial rheology, to that of a bubble extracted from the oleofoam and resuspended in oil, for which the interfacial dilatational rheology alone provides stability. We find that below the melting point of the wax, bubbles in the oleofoam are stable whereas bubbles that are only coated with wax crystals dissolve. Both systems dissolve when heated above the melting point of the wax. These findings are rationalized through independent bulk rheological measurements of the oleogel at different temperatures, as well as measurements of the dilatational rheological properties of a wax-coated oil-air interface
Determinação da composição nutricional e sais minerais de frutos de juçara (Euterpe Edulis) coletados na região de Curitiba, PR.
bitstream/item/145214/1/CT-374-Cristiane-Helm.pd
- …