Ultra-porous titanium oxide scaffold with high compressive strength

Highly porous and well interconnected titanium dioxide (TiO2) scaffolds with compressive strength above 2.5 MPa were fabricated without compromising the desired pore architectural characteristics, such as high porosity, appropriate pore size, surface-to-volume ratio, and interconnectivity. Processing parameters and pore architectural characteristics were investigated in order to identify the key processing steps and morphological properties that contributed to the enhanced strength of the scaffolds. Cleaning of the TiO2 raw powder removed phosphates but introduced sodium into the powder, which was suggested to decrease the slurry stability. Strong correlation was found between compressive strength and both replication times and solid content in the ceramic slurry. Increase in the solid content resulted in more favourable sponge loading, which was achieved due to the more suitable rheological properties of the ceramic slurry. Repeated replication process induced only negligible changes in the pore architectural parameters indicating a reduced flaw size in the scaffold struts. The fabricated TiO2 scaffolds show great promise as load-bearing bone scaffolds for applications where moderate mechanical support is required

Characterization of Granulations of Calcium and Apatite in Serum as Pleomorphic Mineralo-Protein Complexes and as Precursors of Putative Nanobacteria

Calcium and apatite granulations are demonstrated here to form in both human and fetal bovine serum in response to the simple addition of either calcium or phosphate, or a combination of both. These granulations are shown to represent precipitating complexes of protein and hydroxyapatite (HAP) that display marked pleomorphism, appearing as round, laminated particles, spindles, and films. These same complexes can be found in normal untreated serum, albeit at much lower amounts, and appear to result from the progressive binding of serum proteins with apatite until reaching saturation, upon which the mineralo-protein complexes precipitate. Chemically and morphologically, these complexes are virtually identical to the so-called nanobacteria (NB) implicated in numerous diseases and considered unusual for their small size, pleomorphism, and the presence of HAP. Like NB, serum granulations can seed particles upon transfer to serum-free medium, and their main protein constituents include albumin, complement components 3 and 4A, fetuin-A, and apolipoproteins A1 and B100, as well as other calcium and apatite binding proteins found in the serum. However, these serum mineralo-protein complexes are formed from the direct chemical binding of inorganic and organic phases, bypassing the need for any biological processes, including the long cultivation in cell culture conditions deemed necessary for the demonstration of NB. Thus, these serum granulations may result from physiologically inherent processes that become amplified with calcium phosphate loading or when subjected to culturing in medium. They may be viewed as simple mineralo-protein complexes formed from the deployment of calcification-inhibitory pathways used by the body to cope with excess calcium phosphate so as to prevent unwarranted calcification. Rather than representing novel pathophysiological mechanisms or exotic lifeforms, these results indicate that the entities described earlier as NB most likely originate from calcium and apatite binding factors in the serum, presumably calcification inhibitors, that upon saturation, form seeds for HAP deposition and growth. These calcium granulations are similar to those found in organisms throughout nature and may represent the products of more general calcium regulation pathways involved in the control of calcium storage, retrieval, tissue deposition, and disposal

In Vivo Ectopic Implantation Model to Assess Human Mesenchymal Progenitor Cell Potential

Clinical interest on human mesenchymal progenitor cells (hMPC) relies on their potential applicability in cell-based therapies. An in vitro characterization is usually performed in order to define MPC potency. However, in vitro predictions not always correlate with in vivo results and thus there is no consensus in how to really assess cell potency. Our goal was to provide an in vivo testing method to define cell behavior before therapeutic usage, especially for bone tissue engineering applications. In this context, we wondered whether bone marrow stromal cells (hBMSC) would proceed in an osteogenic microenvironment. Based on previous approaches, we developed a fibrin/ceramic/BMP-2/hBMSCs compound. We implanted the compound during only 2 weeks in NOD-SCID mice, either orthotopically to assess its osteoinductive property or subcutaneously to analyze its adequacy as a cell potency testing method. Using fluorescent cell labeling and immunohistochemistry techniques, we could ascertain cell differentiation to bone, bone marrow, cartilage, adipocyte and fibrous tissue. We observed differences in cell potential among different batches of hBMSCs, which did not strictly correlate with in vitro analyses. Our data indicate that the method we have developed is reliable, rapid and reproducible to define cell potency, and may be useful for testing cells destined to bone tissue engineering purposes. Additionally, results obtained with hMPCs from other sources indicate that our method is suitable for testing any potentially implantable mesenchymal cell. Finally, we propose that this model could successfully be employed for bone marrow niche and bone tumor studies. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s12015-013-9464-1) contains supplementary material, which is available to authorized users

Resistência anti-helmíntica em nematoides gastrintestinais de pequenos ruminantes: avanços e limitações para seu diagnóstico

A seleção e a crescente disseminação de nematoides resistentes aos anti-helmínticos mais comumente utilizados, benzimidazóis (BZs), imidazotiazóis e lactonas macrocíclicas (LMs), constituem um sério entrave na produção de pequenos ruminantes em todo o mundo. O uso de métodos eficientes e sensíveis para a detecção e o monitoramento da resistência anti-helmíntica no campo torna-se urgente, especialmente para os grupos de BZs e LMs, devido aos constantes relatos de resistência. A obtenção de um diagnóstico preciso e precoce da resistência é extremamente importante para auxiliar a tomada de decisão em programas de controle parasitário, com o objetivo de preservar a vida útil dos produtos e limitar o desenvolvimento da resistência nas populações de nematoides. Os testes in vivo e, mais recentemente, os testes in vitro têm sido desenvolvidos para a detecção de nematoides resistentes aos principais grupos de anti-helmínticos. No entanto, a disponibilidade de testes in vitro validados e o seu uso prático ainda são muito limitados. Embora o teste de redução na contagem de ovos nas fezes (TRCOF, in vivo - indireto) seja o principal método de escolha para a detecção de resistência no campo, vem recebendo críticas quanto à validade dos resultados, e passa por significativas modificações. Além disso, o desenvolvimento de técnicas moleculares a partir de alterações genômicas gerou avanços consideráveis nessa área de investigação, com o uso de mutações nos códons 167, 198 e 200 do gene da β-tubulina como principais SNPs (polimorfismos de nucleotídeo único; do inglês Single Nucleotide Polymorphisms) associados à resistência aos BZs. A presente revisão tem o objetivo de discutir os métodos de diagnóstico disponíveis para a detecção de resistência anti-helmíntica em nematoides de pequenos ruminantes, destacando progressos e obstáculos para seu uso na rotina laboratorial e no campo

Submicron-scale surface architecture of tricalcium phosphate directs osteogenesis in vitro and in vivo

A current challenge of synthetic bone graft substitute design is to induce bone formation at a similar rate to its biological resorption, matching bone’s intrinsic osteoinductivity and capacity for remodelling. We hypothesise that both osteoinduction and resorption can be achieved by altering surface microstructure of beta-tricalcium phosphate (TCP). To test this, two TCP ceramics are engineered with equivalent chemistry and macrostructure but with either submicron- or micron-scale surface architecture. In vitro, submicron-scale surface architecture differentiates larger, more active osteoclasts – a cell type shown to be important for both TCP resorption and osteogenesis – and enhances their secretion of osteogenic factors to induce osteoblast differentiation of human mesenchymal stem cells. In an intramuscular model, submicrostructured TCP forms 20 % bone in the free space, is resorbed by 24 %, and is densely populated by multinucleated osteoclast-like cells after 12 weeks; however, TCP with micron-scale surface architecture forms no bone, is essentially not resorbed, and contains scarce osteoclast-like cells. Thus, a novel submicron-structured TCP induces substantial bone formation and is resorbed at an equivalent rate, potentially through the control of osteoclast-like cells

Submicron-scale surface architecture of tricalcium phosphate directs osteogenesis in vitro and in vivo

A current challenge of synthetic bone graft substitute design is to induce bone formation at a similar rate to its biological resorption, matching bone's intrinsic osteoinductivity and capacity for remodelling. We hypothesise that both osteoinduction and resorption can be achieved by altering surface microstructure of beta-tricalcium phosphate (TCP). To test this, two TCP ceramics are engineered with equivalent chemistry and macrostructure but with either submicron- or micron-scale surface architecture. In vitro, submicron-scale surface architecture differentiates larger, more active osteoclasts--a cell type shown to be important for both TCP resorption and osteogenesis--and enhances their secretion of osteogenic factors to induce osteoblast differentiation of human mesenchymal stem cells. In an intramuscular model, submicrostructured TCP forms 20 % bone in the free space, is resorbed by 24 %, and is densely populated by multinucleated osteoclast-like cells after 12 weeks; however, TCP with micron-scale surface architecture forms no bone, is essentially not resorbed, and contains scarce osteoclast-like cells. Thus, a novel submicron-structured TCP induces substantial bone formation and is resorbed at an equivalent rate, potentially through the control of osteoclast-like cells

Submicron-scale surface architecture of tricalcium phosphate directs osteogenesis in vitro and in vivo

A current challenge of synthetic bone graft substitute design is to induce bone formation at a similar rate to its biological resorption, matching bone’s intrinsic osteoinductivity and capacity for remodelling. We hypothesise that both osteoinduction and resorption can be achieved by altering surface microstructure of beta-tricalcium phosphate (TCP). To test this, two TCP ceramics are engineered with equivalent chemistry and macrostructure but with either submicron- or micron-scale surface architecture. In vitro, submicron-scale surface architecture differentiates larger, more active osteoclasts – a cell type shown to be important for both TCP resorption and osteogenesis – and enhances their secretion of osteogenic factors to induce osteoblast differentiation of human mesenchymal stem cells. In an intramuscular model, submicrostructured TCP forms 20 % bone in the free space, is resorbed by 24 %, and is densely populated by multinucleated osteoclast-like cells after 12 weeks; however, TCP with micron-scale surface architecture forms no bone, is essentially not resorbed, and contains scarce osteoclast-like cells. Thus, a novel submicron-structured TCP induces substantial bone formation and is resorbed at an equivalent rate, potentially through the control of osteoclast-like cells

Osteoclast resorption of beta-tricalcium phosphate controlled by surface architecture

A resorbable bone graft substitute should mimic native bone in its capacity to support bone formation and be remodeled by osteoclasts (OCl) or other multinucleated cells such as foreign body giant cells (FBGC). We hypothesize that by changing the scale of surface architecture of beta-tricalcium phosphate (TCP), cellular resorption can be influenced. CD14+ monocyte precursors were isolated from human peripheral blood (n = 4 independent donors) and differentiated into OCl or FBGC on the surface of TCP discs comprising either submicron- or micron-scale surface topographical features (TCPs and TCPb, respectively). On submicrostructured TCPs, OCl survived, fused, differentiated, and extensively resorbed the substrate; however, on microstructured TCPb, OCl survival, TRAP activation, and fusion were attenuated. Importantly, no resorption was observed on microstructured TCPb. By confocal microscopy, OCl formed on TCPs contained numerous actin rings allowing for resorption, but not on TCPb. In comparison, FBGC could not resorb either TCP material, suggesting that osteoclast-specific machinery is necessary to resorb TCP. By tuning surface architecture, it appears possible to control osteoclast resorption of calcium phosphate. This approach presents a useful strategy in the design of resorbable bone graft substitute