Challenges, trends and approaches of future reliability engineering in high precision manufacturing processes

The progress within the development of manufacturing processes leads to complex failure modes and reliability problems within the product life cycle. This fact is valid in the case of mass production of consumer goods, e.g. automobiles, as well as small batch series of industrial goods, e.g. machine tools. Especially micro product platforms with a high amount of derivate and variants are challenging regarding to the planning of high precision manufacturing processes to ensure product reliability. This paper discusses challenges, trends and approaches of future reliability engineering in planning and realisation of high precision manufacturing processes. It considers e.g. mathematical models for uncertainty quantification, additive manufacturing, hydro micro forming, 3D printing and multivariate process validation models. The paper contains contributions of universities, institutes and original equipment manufacturers of industrial nations: Germany, United Kingdom, Japan, Turkey, Poland and U.S.A

The Acute Phase Protein Ceruloplasmin as a Non-Invasive Marker of Pseudopregnancy, Pregnancy, and Pregnancy Loss in the Giant Panda

After ovulation, non-pregnant female giant pandas experience pseudopregnancy. During pseudopregnancy, non-pregnant females exhibit physiological and behavioral changes similar to pregnancy. Monitoring hormonal patterns that are usually different in pregnant mammals are not effective at determining pregnancy status in many animals that undergo pseudopregnancy, including the giant panda. Therefore, a physiological test to distinguish between pregnancy and pseudopregnancy in pandas has eluded scientists for decades. We examined other potential markers of pregnancy and found that activity of the acute phase protein ceruloplasmin increases in urine of giant pandas in response to pregnancy. Results indicate that in term pregnancies, levels of active urinary ceruloplasmin were elevated the first week of pregnancy and remain elevated until 20–24 days prior to parturition, while no increase was observed during the luteal phase in known pseudopregnancies. Active ceruloplasmin also increased during ultrasound-confirmed lost pregnancies; however, the pattern was different compared to term pregnancies, particularly during the late luteal phase. In four out of the five additional reproductive cycles included in the current study where females were bred but no birth occurred, active ceruloplasmin in urine increased during the luteal phase. Similar to the known lost pregnancies, the temporal pattern of change in urinary ceruloplasmin during the luteal phase deviated from the term pregnancies suggesting that these cycles may have also been lost pregnancies. Among giant pandas in captivity, it has been presumed that there is a high rate of pregnancy loss and our results are the first to provide evidence supporting this notion

First case of Anaplasma platys infection in a dog from Croatia

<p>Abstract</p> <p>Background</p> <p>It is known that <it>Anaplasma (A.) platys</it>, the causative agent of infectious canine cyclic thrombocytopenia, is endemic in countries of the Mediterranean basin. However, few reports are available from the Balkans. This case report describes a dog, which was imported from Croatia to Germany in May 2010. One month later the dog was presented to a local veterinarian in Germany due to intermittent/recurrent diarrhoea. Diagnostic tests were performed to identify infections caused by <it>Anaplasma </it>spp., <it>Ehrlichia </it>spp., <it>Hepatozoon canis, Babesia </it>spp., <it>Leishmania </it>spp., <it>Borrelia burgdorferi </it>and/or <it>Dirofilaria immitis</it>.</p> <p>Findings</p> <p>Haematological examination of a blood smear revealed basophilic inclusions in thrombocytes, which were confirmed as <it>A. platys </it>with a species-specific real-time PCR. Additionally, an infection with <it>Babesia (B.) vogeli </it>was also detected (PCR and serology). No specific antibodies against <it>Anaplasma </it>antigen were detectable. Although the dog showed no specific clinical signs, thrombocytopenia, anaemia and elevated C-reactive protein (CRP) were observed. Sequencing of a 1,348-bp partial ribosomal RNA gene revealed highest homology to <it>A. platys </it>sequences from Thailand, Japan and France.</p> <p>Conclusions</p> <p><it>A. platys </it>was detected for first time in a dog imported from Croatia. As the dog was also co-infected by <it>B. vogeli</it>, unique serological and haematological findings were recorded. Thrombocytopenia, anaemia and elevated values of C-reactive protein were the laboratory test abnormalities observed in this case. <it>A. platys </it>infections should be considered in dogs coming from Croatia and adjacent regions.</p

Annealing effect on structural and optical properties of chemical bath deposited MnS thin film

9th International Physics Conference of the Balkan Physical Union, BPU 2015 --24 August 2015 through 27 August 2015 -- --MnS thin film was prepared by the chemical bath deposition (CBD) method on commercial microscope glass substrate deposited at 30 °C. The as-deposited film was given thermal annealing treatment in air atmosphere at various temperatures (150, 300 and 450 °C) for 1 h. The MnS thin film was characterized by using X-ray diffraction (XRD), UV-vis spectrophotometer and Hall effect measurement system. The effect of annealing temperature on the structural, electrical and optical properties such as optical constants of refractive index (n) and energy band gap (Eg) of the film was determined. XRD measurements reveal that the film is crystallized in the wurtzite phase and changed to tetragonal Mn3O4 phase after being annealed at 300 °C. The energy band gap of film decreased from 3.69 eV to 3.21 eV based on the annealing temperature. © 2016 AIP Publishing LLC

Influence of post-deposition annealing on the structural and optical properties of gamma-MnS thin film

WOS: 000430996600010gamma-MnS thin film was deposited at 40 degrees C temperature on glass substrate by Chemical Bath Deposition (CBD) method that has superior advantageous in terms of fast and cheap production. MnS thin film was annealed in nitrogen atmosphere at temperatures 100, 200, 300, 400, 500 C for an hour. The effect of annealing temperature on structural and optical properties have been investigated. X-ray diffraction (XRD) analysis revealed that gamma-MnS thin film had the phase change and oxidized at 400,500 C annealing temperature. The grain size of the annealed film was calculated between 241 and 280 angstrom as a function of annealing temperature. It was observed that optical transmission values decreased at wavelength of 400-700 nm (visible region) after annealing at temperatures 400 and 500 degrees C. Increasing annealing temperature induces reduction in energy band gap values from 3.89 eV down to 3.46 eV. Refractive index (n) values were calculated by envelope method: Refractive index values at visible region increased from 2.03 to 2.54 with increasing annealing temperature. (C) 2018 Elsevier GmbH. All rights reserved.University of CukurovaCukurova University [FBA-2017-7829]This work was supported by the University of Cukurova [Project Number FBA-2017-7829]