Influence of loudspeaker directivity on the measurement uncertainty

One of the most significant aspects of a building’s acoustic behavior is the airborne sound insulation of the room façades, since this determines the protection of its inhabitants against environmental noise. For this reason, authorities in most countries have established in their acoustic regulations for buildings the minimum value of sound insulation that must be respected for façades. In order to verify compliance with legal requirements it is usual to perform acoustic measurements in the finished buildings and then compare the measurement results with the established limits. Since there is always a certain measurement uncertainty, this uncertainty must be calculated and taken into account in order to ensure compliance with specifications. The most commonly used method for measuring sound insulation on façades is the so-called Global Loudspeaker Method, specified in ISO 140-5:1998. This method uses a loudspeaker placed outside the building as a sound source. The loudspeaker directivity has a significant influence on the measurement results, and these results may change noticeably by choosing different loudspeakers, even though they all fulfill the directivity requirements of ISO 140-5. This work analyzes the influence of the loudspeaker directivity on the results of façade sound insulation measurement, and determines its contribution to measurement uncertainty. The theoretical analysis is experimentally validated by means of an intermediate precision test according to ISO 5725-3:1994, which compares the values of sound insulation obtained for a façade using various loudspeakers with different directivitie

Influence of loudspeaker directivity on the measurement uncertainty of the acoustic testing of facades.

One of the most significant aspects of a building?s acoustic behavior is the airborne sound insulation of the room façades, since this determines the protection of its inhabitants against environmental noise. For this reason, authorities in most countries have established in their acoustic regulations for buildings the minimum value of sound insulation that must be respected for façades. In order to verify compliance with legal requirements it is usual to perform acoustic measurements in the finished buildings and then compare the measurement results with the established limits. Since there is always a certain measurement uncertainty, this uncertainty must be calculated and taken into account in order to ensure compliance with specifications. The most commonly used method for measuring sound insulation on façades is the so-called Global Loudspeaker Method, specified in ISO 140-5:1998. This method uses a loudspeaker placed outside the building as a sound source. The loudspeaker directivity has a significant influence on the measurement results, and these results may change noticeably by choosing different loudspeakers, even though they all fulfill the directivity requirements of ISO 140-5. This work analyzes the influence of the loudspeaker directivity on the results of façade sound insulation measurement, and determines its contribution to measurement uncertainty. The theoretical analysis is experimentally validated by means of an intermediate precision test according to ISO 5725-3:1994, which compares the values of sound insulation obtained for a façade using various loudspeakers with different directivities. Keywords: Uncertainty, Façade, Insulatio

Metal-Semiconductor AsSb-Al0.6Ga0.4As0.97Sb0.03 Metamaterial

AlGaAsSb and AlGaAs films as thick as 1 μm with Al content as high as 60% were successfully grown by low-temperature (200 °C) MBE. To overcome the well-known problem of growth disruption due to a high aluminum content and a low growth temperature, we applied intermittent growth with the temperature elevation to smooth out the emerging roughness of the growth front. Post-growth annealing of the obtained material allowed us to form a developed system of As or AsSb nanoinclusions, which occupy 0.3–0.6% of the material volume. While the As nanoinclusions are optically inactive, the AsSb nanoinclusions provide a strong optical absorption near the band edge of the semiconductor matrix due to the Fröhlich plasmon resonance. Owing to the wider bandgap of the grown Al0.6Ga0.4As0.97Sb0.03 compound, we have expanded the spectral range available for studying the Fröhlich plasmon resonance. The grown metamaterial represents an optically active medium of which the formation process is completely compatible with the epitaxial growth technology of semiconductors

Influence of the Ni Catalyst on the Properties of the Si-C Composite Material for LIB Anodes

The subject of this study was Si-C composites for lithium-ion battery (LIB) anodes obtained by carbonization of nanodispersed silicon with carbon monofluoride. To determine the possibility of increasing the degree of graphitization of nanodispersed carbon forming shells around the silicon particles at lower temperatures, nickel in the form of an alcoholic solution of Ni(NO3)2 was introduced as a catalyst into the pellets of the resulting composite. The XRD, Raman scattering and EDS methods were used to investigate changes both in the phase and elemental composition of materials resulting from the annealing of the Ni-containing Si-C composite over the temperature range of 500–1100 °C. It was found for the first time that nickel silicides that emerged during the annealing became catalysts and, at the same time, intermediate products, of cubic silicon carbide (β-SiC) synthesis, which reduced its temperature formation from ~1100 °C to ~800 °C. The same compounds had a catalytic effect on the carbon atom association, leading to an increase in the degree of its graphitization. The influence of changing the composition of the investigated material on the electrochemical characteristics of the obtained negative LIB electrodes was traced

Nitride Surface Passivation of GaAs Nanowires: Impact on Surface State Density

Surface nitridation by hydrazine–sulfide solution, which is known to produce surface passivation of GaAs crystals, was applied to GaAs nanowires (NWs). We studied the effect of nitridation on conductivity and microphotoluminescence (μ-PL) of individual GaAs NWs using conductive atomic force microscopy (CAFM) and confocal luminescent microscopy (CLM), respectively. Nitridation is found to produce an essential increase in the NW conductivity and the μ-PL intensity as well evidence of surface passivation. Estimations show that the nitride passivation reduces the surface state density by a factor of 6, which is of the same order as that found for GaAs/AlGaAs nanowires. The effects of the nitride passivation are also stable under atmospheric ambient conditions for six months

Supplement 1: Surface-enhanced gallium arsenide photonic resonator with quality factor of 6 × 10⁶

Supplementary Material Originally published in Optica on 20 February 2017 (optica-4-2-218

From graphene oxide towards aminated graphene: facile synthesis, its structure and electronic properties

International audienceAbstract In this paper we present a facile method for the synthesis of aminated graphene derivative through simultaneous reduction and amination of graphene oxide via two-step liquid phase treatment with hydrobromic acid and ammonia solution in mild conditions. The amination degree of the obtained aminated reduced graphene oxide is of about 4 at.%, whereas C/O ratio is up to 8.8 as determined by means of X-ray photoelectron spectroscopy. The chemical reactivity of the introduced amine groups is further verified by successful test covalent bonding of the obtained aminated graphene with 3-Chlorobenzoyl chloride. The morphological features and electronic properties, namely conductivity, valence band structure and work function are studied as well, illustrating the influence of amine groups on graphene structure and physical properties. Particularly, the increase of the electrical conductivity, reduction of the work function value and tendency to form wrinkled and corrugated graphene layers are observed in the aminated graphene derivative compared to the pristine reduced graphene oxide. As obtained aminated graphene could be used for photovoltaic, biosensing and catalysis application as well as a starting material for further chemical modifications