Upgrade of SULTAN/EDIPO for HTS Cable Test

AbstractCRPP hosts two unique conductor test facilities SULTAN (SUpraLeiter TestANlage) and EDIPO (European DIPOle). They allow the test of high current superconductors in high magnetic fields (SULTAN 11 T, EDIPO 12.5 T). In both facilities sample currents up to 100 kA can be supplied by means of a NbTi transformer. Presently the facilities are upgraded for the test of high current high-temperature superconductor (HTS) samples. For HTS conductor testing at temperatures between 20 and 50K, the heat flux between the HTS sample under test and the NbTi transformer needs to be limited to around 10W per conductor leg by means of an HTS adapter connecting them. The second required upgrade is the supply of intermediate temperature helium (20-50 K) to the HTS test conductor. It is mandatory that the helium gas coming from the HTS conductor under test can be returned to the cryoplant as cold gas (T < 20K). To reach this goal a tube-in-tube heat exchanger has been manufactured in which 4.5K helium coming from the cryoplant is in counter flow with the warm gas leaving the HTS test conductor

Computational Fluid Dynamics of Reacting Flows at Surfaces: Methodologies and Applications

This review presents the numerical algorithms and speed-up strategies developed to couple continuum macroscopic simulations and detailed microkinetic models in the context of multiscale approaches to chemical reactions engineering. CFD simulations and hierarchical approaches are discussed both for fixed and fluidized systems. The foundations of the methodologies are reviewed together with specific examples to show the applicability of the methods. These concepts play a pivotal role to enable the first-principles multiscale approach to systems of technological relevance

H(T) Phase Diagram in Nb3Sn: A Different Behavior in Single Crystals, Polycristalline Samples and Multifilamentary Wires

A comparative study of magnetic behavior in a DC magnetic field up to 19 Tesla has been undertaken on different Nb3Sn samples, i.e. single crystals, polycrystal samples and multifilamentary wires. From the 1st and 3rd harmonics of the AC magnetic susceptibility a peak effect was experimentally observed in the single crystal and in the polycrystal, whereas this phenomenon is absent in the measured wires. The corresponding H vs T phase diagram reveals a different behavior between wires on one hand and polycrystalline and single crystal samples on the other. In particular, from the 3rd harmonics it has been observed that vortex thermally activated flux creep phenomena are relevant in the wires, whereas the static critical state models are more appropriate to describe single crystals.Comment: 9 pages, 9 figures, to be published on Advances in Cryogenic Engineering, Vol. 51-52 (CEC-ICMC05, Keystone, Colorado, 28 August-3 September 2005

Transport Properties and Exponential n-values of Fe/MgB2 Tapes With Various MgB2 Particle Sizes

Fe/MgB2 tapes have been prepared starting with pre-reacted binary MgB2 powders. As shown by resistive and inductive measurements, the reduction of particle size to a few microns by ball milling has little influence on Bc2, while the superconducting properties of the individual MgB2 grains are essentially unchanged. Reducing the particle size causes an enhancement of Birr from 14 to 16 T, while Jc has considerably increased at high fields, its slope Jc(B) being reduced. At 4.2K, values of 5.3*10^4 and 1.2*10^3 A/cm^2 were measured at 3.5 and 10 T, respectively, suggesting a dominant role of the conditions at the grain interfaces. A systematic variation of these conditions at the interfaces is undertaken in order to determine the limit of transport properties for Fe/MgB2 tapes. The addition of 5% Mg to MgB2 powder was found to affect neither Jc nor Bc2. For the tapes with the highest Jc values, very high exponential n factors were measured: n = 148, 89 and 17 at 3.5, 5 and 10T, respectively and measurements of critical current versus applied strain have been performed. The mechanism leading to high transport critical current densities of filamentary Fe/MgB2 tapes based on MgB2 particles is discussed.Comment: Presented at ICMC 2003, 25-28 May 200

Optimisation of ITER Nb3Sn CICCs for coupling loss, transverse electromagnetic load and axial thermal contraction

The ITER cable-in-conduit conductors (CICCs) are built up from sub-cable bundles, wound in different stages, which are twisted to counter coupling loss caused by time-changing external magnet fields. The selection of the twist pitch lengths has major implications for the performance of the cable in the case of strain sensitive superconductors, i.e. Nb3Sn, as the electromagnetic and thermal contraction loads are large but also for the heat load from the AC coupling loss. Reduction of the transverse load and warm-up cool-down degradation can be reached by applying longer twist pitches in a particular sequence for the sub-stages, offering a large cable transverse stiffness, adequate axial flexibility and maximum allowed lateral strand support. Analysis of short sample (TF conductor) data reveals that increasing the twist pitch can lead to a gain of the effective axial compressive strain of more than 0.3 % with practically no degradation from bending. For reduction of the coupling loss, specific choices of the cabling twist sequence are needed with the aim to minimize the area of linked strands and bundles that are coupled and form loops with the applied changing magnetic field, instead of simply avoiding longer pitches. In addition we recommend increasing the wrap coverage of the CS conductor from 50 % to at least 70 %. The models predict significant improvement against strain sensitivity and substantial decrease of the AC coupling loss in Nb3Sn CICCs, but also for NbTi CICCs minimization of the coupling loss can be achieved. Although the success of long pitches to transverse load degradation was already demonstrated, the prediction of the combination with low coupling loss needs to be validated by a short sample test.Comment: to be published in Supercond Sci Techno

Proven intra and interobserver reliability in the echographic assessments of body fat changes related to HIV associated Adipose Redistribution Syndrome (HARS)

OBJECTIVE: To prove intra- and inter-observer's reliability of ultrasound (US) in the assessment of lipoatrophic findings related to the HIV associated Adipose Redistribution Syndrome (HARS). PATIENTS AND METHODS: In two separated sessions, 2 consecutive measurements of subcutaneous fat thickness (SFT) were performed by each observer at the deepest point of Bichat pad, the dorsal face of arm and the mid thigh for the assessment of facial, brachial and crural lipoatrophy, respectively. We enrolled 20 HIV patients, rotating an experienced and untrained sonologist. The assessments were performed avoiding any stand off pads in the skin and excluding artefacts due to the too abundant quantity of gel to obtaining, with minimal transducer pressure, the best resolution of the reference points. RESULTS: Means of facial, brachial and crural SFT showed no significant differences between the workers. Coefficients of variability (SD/mean x100) were similar for facial (ranges: 4.7-5.2% vs 4.9-5.6%, respectively), brachial (ranges: 5.8-8.4% vs 9.7-11.2%) and crural SFTs (ranges: 5.9-6% vs 6.2-8.7%). There was greater consistency in the measurements performed by the experienced vs the untrained worker. Inter-observer agreement, assessed through kappa statistic (k) analysis, confirmed increased measurement's agreement in the facial (k ranged from 0.40 to 0.60), brachial (k: 0.23-0.63) and crural SFT assessments (k: 0.58-0.70) from the 1(st) to 2(nd) session. CONCLUSIONS: US shows low intra observer variability and good inter observer reliability in the assessment of body fat changes related to the HARS. The different degree of consistency by the workers and the improvement of interobserver agreement, suggest to stating a well defined period of training to obtain better US reliabilit