Application of optical coherence tomography enhances reproducibility of arthroscopic evaluation of equine joints

Peer reviewe

Dosimetric effect of respiratory motion on planned dose in whole-breast volumetric modulated arc therapy using moderate and ultra-hypofractionation

Background and purpose: The interplay efect of respiratory motion on the planned dose in free-breathing rightsided whole-breast irradiation (WBI) were studied by simulating hypofractionated VMAT treatment courses. Materials and methods: Ten patients with phase-triggered 4D-CT images were included in the study. VMAT plans targeting the right breast were created retrospectively with moderately hypofractionated (40.05 Gy in 15 fractions of 2.67 Gy) and ultra-hypofractionated (26 Gy 5 fractions of 5.2 Gy) schemes. 3D-CRT plans were generated as a reference. All plans were divided into respiratory phase-specifc plans and calculated in the corresponding phase images. Fraction-specifc dose was formed by deforming and summing the phase-specifc doses in the planning image for each fraction. The fraction-specifc dose distributions were deformed and superimposed onto the planning image, forming the course-specifc respiratory motion perturbed dose distribution. Planned and respiratory motion perturbed doses were compared and changes due to respiratory motion and choice of fractionation were evaluated. Results: The respiratory motion perturbed PTV coverage (V95%) decreased by 1.7% and the homogeneity index increased by 0.02 for VMAT techniques, compared to the planned values. Highest decrease in CTV coverage was 0.7%. The largest dose diferences were located in the areas of steep dose gradients parallel to respiratory motion. The largest diference in DVH parameters between fractionation schemes was 0.4% of the prescribed dose. Clinically relevant changes to the doses of organs at risk were not observed. One patient was excluded from the analysis due to large respiratory amplitude. Conclusion: Respiratory motion of less than 5 mm in magnitude did not result in clinically signifcant changes in the planned free-breathing WBI dose. The 5 mm margins were sufcient to account for the respiratory motion in terms of CTV dose homogeneity and coverage for VMAT techniques. Steep dose gradients near the PTV edges might decrease the CTV coverage. No clinical signifcance was found due to the choice of fractionation.peerReviewe

Effects of ultrasound frequency, temporal sampling frequency, and spatial sampling step on the quantitative ultrasound parameters of articular cartilage

Quantitative ultrasound imaging may provide a technique for diagnosing initial signs of osteoarthritis (OA), such as surface fibrillation of articular cartilage. Because subchondral sclerosis and osteophyte formation occur in OA as well, ultrasonic analysis of subchondral bone could yield useful diagnostic information. In this study, we investigated whether low-frequency (5 MHz) ultrasound, typically used in bone diagnostics, would be feasible for evaluating the integrity of the surface of the cartilage. The reflection parameters in the time and frequency domains, the ultrasound roughness index, and the wavelet-based parameters were evaluated using ultrasound transducers operating at 5, 10, and 50 MHz frequencies. The effects of variable size of spatial sampling steps and of temporal sampling frequencies were also investigated. Custom-made phantoms and cartilage samples with various surface characteristics were analyzed. The reflection parameters detected the surface degradation with all ultrasound frequencies. The roughness of the surface could only be evaluated reliably with the 50 MHz-focused transducer. In conclusion, simultaneous analysis of the reflection parameters of the cartilage and the subchondral bone is feasible at low (5 MHz) ultrasound frequencies. However, reliable evaluation of the microtopography of the cartilage requires use of a higher ultrasound frequency

Ultrasound backscattering is anisotropic in bovine articular cartilage

Collagen, proteoglycans and chondrocytes can contribute to ultrasound scattering in articular cartilage. However, anisotropy of ultrasound scattering in cartilage is not fully characterized.We investigate this using a clinical intravascular ultrasound device with ultrasound frequencies of 9 and 40 MHz. Osteochondral samples were obtained from intact bovine patellas, and cartilage was imaged in two perpendicular directions: through articular and lateral surfaces. At both frequencies, ultrasound backscattering was higher (p < 0.05) when measured through the lateral surface of cartilage. In addition, the composition and structure of articular cartilage were investigated with multiple reference methods involving light microscopy, digital densitometry, polarized light microscopy and Fourier infrared imaging. Reference methods indicated that acoustic anisotropy of ultrasound scattering arises mainly from non-uniform distribution of chondrocytes and anisotropic orientation of collagen fibers. To conclude, ultrasound backscattering in articular cartilage was found to be anisotropic and dependent on the frequency in use

Ultrasound evaluation of mechanical injury of bovine knee articular cartilage under arthroscopic control

A local cartilage injury can trigger development of posttraumatic osteoarthritis (OA). Surgical methods have been developed for repairing cartilage injuries. Objective and sensitive methods are needed for planning an optimal surgery as well as for monitoring the surgical outcome. In this laboratory study, the feasibility of an arthroscopic ultrasound technique for diagnosing cartilage injuries was investigated. In bovine knees (n = 7) articular cartilage in the central patella and femoral sulcus was mechanically degraded with a steel brush modified for use under arthroscopic control. Subsequently, mechanically degraded and intact adjacent tissue was imaged with a high frequency (40 MHz) intravascular ultrasound device operated under arthroscopic guidance. After opening the knee joint, mechanical indentation measurements were also conducted with an arthroscopic device at each predefined anatomical site. Finally, cylindrical osteochondral samples were extracted from the measurement sites and prepared for histological analysis. Quantitative parameters, i.e., reflection coefficient (R), integrated reflection coefficient (IRC), apparent integrated backscattering (AIB), and ultrasound roughness index (URI) were calculated from the ultrasound signals. The reproducibilities (sCV %) of the measurements of ultrasound parameters were variable (3.7% to 26.1%). Reflection and roughness parameters were significantly different between mechanically degraded and adjacent intact tissue(p < 0.05). Surface fibrillation of mechanically degraded tissue could be visualized in ultrasound images. Furthermore, R and IRC correlated significantly with the indentation stiffness. The present results are encouraging; however, further technical development of the arthroscopic ultrasound technique is needed for evaluation of the integrity of human articular cartilage in vivo

Diagnosis of knee osteochondral lesions with ultrasound imaging

Evaluation of articular cartilage and subchondral bone is essential in the diagnosis of joint diseases and injuries. Interobserver and intraobserver reproducibilities of arthroscopic grading are only poor to moderate. Thus, for quantitative and objective evaluation of cartilage and subchondral bone, ultrasound arthroscopy (UA) has been introduced to clarify this dilemma. Assessment of the clinical feasibility of high-frequency ultrasonography (US) during 6 knee arthroscopies was conducted, and the surgical technique is presented. US imaging was conducted with a flexible 9-MHz US catheter inserted into the joint through conventional portals. US and arthroscopy videos were synchronously recorded, and US parameters for cartilage and subchondral bone characteristics were measured. Arthroscopy and US imaging were combined to perform cartilage grading. UA produced quantitative data on lesion size, as well as cartilage quality, and showed subchondral bone changes. Visualization of an osteochondritis dissecans lesion not detected by conventional arthroscopy and US-guided retrograde drilling were possible with UA. To conclude, UA proved to be clinically feasible and aided in the diagnosis when assessing knee osteochondral lesions

Ultrasound arthroscopy of hip in treatment of osteochondritis dissecans

An ultrasound arthroscopy (UA) technique is a promising tool for the evaluation of the articular cartilage during arthroscopic examination. However, the applicability of UA for the evaluation of the hip joint is unknown. We describe a UA assessment of a patient with osteochondritis dissecans at the femoral head. An ultrasound catheter designed for intravascular imaging was inserted into the hip joint by use of conventional arthroscopic portals, and the cartilage surfaces of the femoral head and acetabulum were investigated with ultrasound. UA provided essential quantitative information on the integrity of the articular cartilage and the condition of the subchondral plate not assessable with conventional arthroscopy. Furthermore, the UA technique provided the possibility to monitor arthroscopy-assisted retrograde drilling and bone transplantation in the hip joint

Finite difference time domain model of ultrasound propagation in agarose scaffold containing collagen or chondrocytes

Measurement of ultrasound backscattering is a promising diagnostic technique for arthroscopic evaluation of articular cartilage. However, contribution of collagen and chondrocytes on ultrasound backscattering and speed of sound in cartilage is not fully understood and is experimentally difficult to study. Agarose hydrogels have been used in tissue engineering applications of cartilage. Therefore, the aim of this study was to simulate the propagation of high frequency ultrasound (40 MHz) in agarose scaffolds with varying concentrations of chondrocytes (1 to 32 × 10 cells/ml) and collagen (1.56-200 mg/ml) using transversely isotropic two-dimensional finite difference time domain method (FDTD). Backscatter and speed of sound were evaluated from the simulated pulse-echo and through transmission measurements, respectively. Ultrasound backscatter increased with increasing collagen and chondrocyte concentrations. Furthermore, speed of sound increased with increasing collagen concentration. However, this was not observed with increasing chondrocyte concentrations. The present study suggests that the FDTD method may have some applicability in simulations of ultrasound scattering and propagation in constructs containing collagen and chondrocytes. Findings of this study indicate the significant role of collagen and chondrocytes as ultrasound scatterers and can aid in development of modeling approaches for understanding how cartilage architecture affects to the propagation of high frequency ultrasound

Importance of material properties and porosity of bone on mechanical response of articular cartilage in human knee joint - a two-dimensional finite element study

Mechanical behavior of bone is determined by the structure and intrinsic, local material properties of the tissue. However, previously presented knee joint models for evaluation of stresses and strains in joints generally consider bones as rigid bodies or linearly elastic solid materials. The aim of this study was to estimate how different structural and mechanical properties of bone affect the mechanical response of articular cartilage within a knee joint. Based on a cadaver knee joint, a two-dimensional (2D) finite element (FE) model of a knee joint including bone, cartilage, and meniscus geometries was constructed. Six different computational models with varying properties for cortical, trabecular, and subchondral bone were created, while the biphasic fibril-reinforced properties of cartilage and menisci were kept unaltered. The simplest model included rigid bones, while the most complex model included specific mechanical properties for different bone structures and anatomically accurate trabecular structure. Models with different porosities of trabecular bone were also constructed. All models were exposed to axial loading of 1.9 times body weight within 0.2 s (mimicking typical maximum knee joint forces during gait) while free varus-valgus rotation was allowed and all other rotations and translations were fixed. As compared to results obtained with the rigid bone model, stresses, strains, and pore pressures observed in cartilage decreased depending on the implemented properties of trabecular bone. Greatest changes in these parameters (up to -51% in maximum principal stresses) were observed when the lowest modulus for trabecular bone (measured at the structural level) was used. By increasing the trabecular bone porosity, stresses and strains were reduced substantially in the lateral tibial cartilage, while they remained relatively constant in the medial tibial plateau. The present results highlight the importance of long bones, in particular, their mechanical properties and porosity, in altering and redistributing forces transmitted through the knee joint