10 research outputs found
Fabrication and evaluation of a micro(bio)sensor array chip for multiple parallel measurements of important cell biomarkers
© 2014 by the authors; licensee MDPI, Basel, Switzerland. This report describes the design and development of an integrated electrochemical cell culture monitoring system, based on enzyme-biosensors and chemical sensors, for monitoring indicators of mammalian cell metabolic status. MEMS technology was used to fabricate a microwell-format silicon platform including a thermometer, onto which chemical sensors (pH, O2) and screen-printed biosensors (glucose, lactate), were grafted/deposited. Microwells were formed over the fabricated sensors to give 5-well sensor strips which were interfaced with a multipotentiostat via a bespoke connector box interface. The operation of each sensor/biosensor type was examined individually, and examples of operating devices in five microwells in parallel, in either potentiometric (pH sensing) or amperometric (glucose biosensing) mode are shown. The performance characteristics of the sensors/biosensors indicate that the system could readily be applied to cell culture/toxicity studies
The effects of problem-oriented policing on crime and disorder
Problem-oriented Policing (POP) was first introduced by Herman Goldstein in 1979. The
approach was one of a series of responses to a crisis in effectiveness and legitimacy in
policing that emerged in the 1970s and 1980s. Goldstein argued that police were not
being effective in preventing and controlling crime because they had become too focused
on the âmeansâ of policing and had neglected the âgoalsâ of preventing and controlling
crime and other community problems. Goldstein argued that the unit of analysis in
policing must become the âproblemâ rather than calls or crime incidents as was the case
during that period. POP has had tremendous impact on American policing, and is now
one of the most widely implemented policing strategies in the US.
To synthesize the extant problem-oriented policing evaluation literature and assess the
effects of problem-oriented policing on crime and disorder
Eligible studies had to meet three criteria: (1) the SARA model was used for a problemoriented
policing intervention; (2) a comparison group was included; (3) at least one
crime or disorder outcome was reported with sufficient data to generate an effect size.
The unit of analysis could be people or places.
Several strategies were used to perform an exhaustive search for literature fitting the
eligibility criteria. First, a keyword search was performed on an array of online abstract
databases. Second, we reviewed the bibliographies of past reviews of problem-oriented
policing. Third, we performed forward searches for works that have cited seminal
problem-oriented policing studies. Fourth, we performed hand searches of leading
journals in the field. Fifth, we searched the publications of several research and
professional agencies. Sixth, after finishing the above searches we e-mailed the list of
studies meeting our eligibility criteria to leading policing scholars knowledgeable in the
area of problem-oriented policing to ensure we had not missed any relevant studies.
For our ten eligible studies, we provide both a narrative review of effectiveness and a
meta-analysis. For the meta-analysis, we coded all primary outcomes of the eligible
studies and we report the mean effect size (for studies with more than one primary
outcome, we averaged effects to create a mean), the largest effect, and the smallest effect.
Because of the heterogeneity of our studies, we used a random effects model.
Based on our meta-analysis, overall problem-oriented policing has a modest but
statistically significant impact on reducing crime and disorder. Our results are consistent
when examining both experimental and quasi-experimental studies.
Conclusions:
We conclude that problem-oriented policing is effective in reducing crime and disorder,
although the effect is fairly modest. We urge caution in interpreting these results because
of the small number of methodologically rigorous studies on POP and the diversity of
problems and responses used in our eligible studies
Microfabricated glucose biosensor for culture welloperation
A water-based carbon screen-printing ink formulation, containing the redox mediator cobalt phthalocyanine (CoPC) and the enzyme glucose oxidase (GOx), was investigated for its suitability to fabricate glucose microbiosensors in a 96-well microplate format: (1)the biosensor ink was dip-coated onto a platinum (Pt) wire electrode, leading to satisfactory amperometric performance; (2)the ink was deposited onto the surface of a series of Pt microelectrodes (10-500 ÎŒm diameter) fabricated on a silicon substrate using MEMS (microelectromechanical systems) microfabrication techniques: capillary deposition proved to be successful; a Pt microdisc electrode of â„100 ÎŒm was required for optimum biosensor performance; (3)MEMS processing was used to fabricate suitably sized metal (Pt) tracks and pads onto a silicon 96 well format base chip, and the glucose biosensor ink was screen-printed onto these pads to create glucose microbiosensors. When formed into microwells, using a 340 ÎŒl volume of buffer, the microbiosensors produced steady-state amperometric responses which showed linearity up to 5. mM glucose (CV=6% for n=5 biosensors). When coated, using an optimised protocol, with collagen in order to aid cell adhesion, the biosensors continued to show satisfactory performance in culture medium (linear range to 2. mM, dynamic range to 7. mM, CV=5.7% for n=4 biosensors). Finally, the operation of these collagen-coated microbiosensors, in 5-well 96-well format microwells, was tested using a 5-channel multipotentiostat. A relationship between amperometric response due to glucose, and cell number in the microwells, was observed. These results indicate that microphotolithography and screen-printing techniques can be combined successfully to produce microbiosensors capable of monitoring glucose metabolism in 96 well format cell cultures. The potential application areas for these microbiosensors are discussed. © 2012 Elsevier B.V
Molecular Bridging of Silicon Nanogaps
The highly doped electrodes of a vertical silicon nanogap device have been bridged by a 5.85 nm long molecular wire, which was synthesized in situ by grafting 4-ethynylbenzaldehyde via C-Si links to the top and bottom electrodes and thereafter by coupling an amino-terminated fluorene unit to the aldehyde groups of the activated electrode surfaces. The number of bridging molecules is constrained by relying on surface roughness to match the 5.85 nm length with an electrode gap that is nominally 1 nm wider and may be controlled by varying the reaction time: the device current increases from <= 1 pA at 1 V following the initial grafting step to 10-100 nA at 1 V when reacted for 5-15 min with the amino-terminated linker and 10 mu A when reacted for 16-53 h. It is the first time that both ends of a molecular wire have been directly grafted to silicon electrodes, and these molecule-Induced changes are reversible. The bridges detach when the device Is rinsed with dilute add solution, which breaks the imine links of the in situ formed wire and causes the current to revert to the subpicoampere leakage value of the 4-ethynylbenzaldehyde-grafted nanogap structure