Analysis of thin-film structures with nuclear backscattering and x-ray diffraction

Backscattering of MeV ^(4)He ions and Seemann-Bohlin x-ray diffraction techniques have been used to study silicide formation on Si and SiO_2 covered with evaporated metal films. Backscattering techniques provide information on the composition of thin-film structures as a function of depth. The glancing-angle x-ray technique provides identification of phases and structural information. Examples are given of V on Si and on SiO_2 to illustrate the major features of these analysis techniques. We also give a general review of recent studies of silicide formation

Dynamics of Multistage Gear Transmission with Effects of Gearbox Vibrations

A comprehensive approach is presented in analyzing the dynamic behavior of multistage gear transmission systems with the effects of gearbox induced vibrations and mass imbalances of the rotor. The modal method, with undamped frequencies and planar mode shapes, is used to reduce the degrees of freedom of the gear system for time-transient dynamic analysis. Both the lateral and torsional vibration modes of each rotor-bearing-gear stage as well as the interstage vibrational characteristics are coupled together through localized gear mesh tooth interactions. In addition, gearbox vibrations are also coupled to the rotor-bearing-gear system dynamics through bearing support forces between the rotor and the gearbox. Transient and steady state dynamics of lateral and torsional vibrations of the geared system are examined in both time and frequency domains to develop interpretations of the overall modal dynamic characteristics under various operating conditions. A typical three-stage geared system is used as an example. Effects of mass imbalance and gearbox vibrations on the system dynamic behavior are presented in terms of modal excitation functions for both lateral and torsional vibrations. Operational characteristics and conclusions are drawn from the results presented

Quantitative assessment of Earth’s radiation belt modeling

The “Quantitative Assessment of Radiation Belt Modeling” focus group was in place at Geospace Environment Modeling from 2014 to 2018. The overarching goals of this focus group were to bring together the current state‐of‐the‐art models for the acceleration, transport, and loss processes in Earth's radiation belts; develop event‐specific and global inputs of wave, plasma, and magnetic field to drive these models; and combine all these components to achieve a quantitative assessment of radiation belt modeling by validating against contemporary radiation belt measurements. This article briefly reviews the current understanding of radiation belt dynamics and related modeling efforts, summarizes the activities and accomplishments of the focus group, and discusses future directions.Accepted manuscrip

Quantitative assessment of radiation belt modeling

The “Quantitative Assessment of Radiation Belt Modeling” focus group was in place at Geospace Environment Modeling from 2014 to 2018. The overarching goals of this focus group were to bring together the current state‐of‐the‐art models for the acceleration, transport, and loss processes in Earth's radiation belts; develop event‐specific and global inputs of wave, plasma, and magnetic field to drive these models; and combine all these components to achieve a quantitative assessment of radiation belt modeling by validating against contemporary radiation belt measurements. This article briefly reviews the current understanding of radiation belt dynamics and related modeling efforts, summarizes the activities and accomplishments of the focus group, and discusses future directions.Accepted manuscrip

Numerical study of particle interaction in gas-particle and liquid particle flows: part I analysis and valdation

A detailed study into the turbulent behaviour of dilute particulate flow under the influence of two carrier phases namely gas and liquid has been carried out behind a sudden expansion geometry. The major endeavour of the study is to ascertain the response of the particles within the carrier (gas or liquid) phase. The main aim prompting the current study is the density difference between the carrier and the dispersed phases. While the ratio is quite high in terms of the dispersed phase for the gas-particle flows, the ratio is far more less in terms of the liquid-particle flows. Numerical simulations were carried out for both these classes of flows using an Eulerian two-fluid model with RNG based k-e model as the turbulent closure. An additional kinetic energy equation to better represent the combined fluid-particle behaviour is also employed in the current set of simulations. In the first part of this two part series, experimental results of Fessler and Eaton (1995) for Gas-Particle (GP) flow and that of Founti and Klipfel (1998) for Liquid-Particle (LP) flow have been compared and analysed. This forms the basis of the current study which aims to look at the particulate behaviour under the influence of two carrier phases. Further numerical simulations were carried out to test whether the current numerical formulation can used to simulate these varied type of flows and the same were validated against the experimental data of both GP as well LP flow. Qualitative results have been obtained for both these classes of flows with their respective experimental data both at the mean as well as at the turbulence level for carrier as well as the dispersed phase

Observation of indirect ionization of W7+ in an electron-beam ion-trap plasma

In this work, visible and extreme ultraviolet spectra of W7+ are measured using the high-temperature superconducting electron-beam ion trap (EBIT) at the Shanghai EBIT Laboratory under extremely low-energy conditions (lower than the nominal electron-beam energy of 130 eV). The relevant atomic structure is calculated using the flexible atomic code package based on the relativistic configuration interaction method. The GRASP2K code, in the framework of the multiconfiguration Dirac-Hartree-Fock method, is employed as well for calculating the wavelength of the M1 transition in the ground configuration of W7+. A line from the W7+ ions is observed at a little higher electron-beam energy than the ionization potential for W4+, making this line appear to be from W5+. A hypothesis for the charge-state evolution of W7+ is proposed based on our experimental and theoretical results; that is, the occurrence of W7+ ions results from indirect ionization caused by stepwise excitation between some metastable states of lower-charge-state W ions, at the nominal electron-beam energy of 59 eV

Modelling the inhalation of drug particles in a human nasal cavity

A human nasal cavity was reconstructed from CT scans to make a Computational Fluid Dynamics (CFD) model. With this model, fluid flow and inhalation of aerosol analysis can be investigated. The surface of the interior nasal cavity is lined with highly vascularised mucosa which provides a means for direct drug delivery into the blood stream. Typical sprayed particles from a nasal spray device produce a particle size distribution with a mean diameter of 50μm, which leads to early deposition due to inertial impaction. In this study low-density drug particles and submicron particles (including nanoparticles) are used to evaluate their deposition patterns. It was found that the low-density particles lightens the particle inertial properties however the particle inertia is more sensitive to the particle size rather than the density. Moreover the deposition pattern for nano-particles is spread out through the airway. Thus an opportunity may exist to develop low-density and nanoparticles to improve the efficiency of drug delivery to target deposition on the highly vascularised mucosal walls. SciRes Copyright © 2010

Modal analysis of multistage gear systems coupled with gearbox vibrations

An analytical procedure to simulate vibrations in gear transmission systems is presented. This procedure couples the dynamics of the rotor-bearing gear system with the vibration in the gear box structure. The model synthesis method is used in solving the overall dynamics of the system, and a variable time-stepping integration scheme is used in evaluating the global transient vibration of the system. Locally each gear stage is modeled as a multimass rotor-bearing system using a discrete model. The modal characteristics are calculated using the matrix-transfer technique. The gearbox structure is represented by a finite element models, and modal parameters are solved by using NASTRAN. The rotor-gear stages are coupled through nonlinear compliance in the gear mesh while the gearbox structure is coupled through the bearing supports of the rotor system. Transient and steady state vibrations of the coupled system are examined in both time and frequency domains. A typical three-geared system is used as an example for demonstration of the developed procedure

Identification of the dominant diffusing species in silicide formation

Implanted noble gas atoms of Xe have been used as diffusion markers in the growth study of three silicides: Ni2Si, VSi2, and TiSi2. Backscattering of MeV He has been used to determine the displacement of the markers. We found that while Si atoms predominate the diffusion in VSi2 and TiSi2, Ni atoms are the faster moving species in Ni2Si