Rapid Synthesis of Poly(methyl methacrylate) Particles with High Molecular Weight by Soap‐Free Emulsion Polymerization Using Water‐in‐Oil Slug Flow

flow process for the production of poly(methyl methacrylate) (PMMA) particles is proposed by soap‐free emulsion polymerization using a water‐in‐oil (W/O) slug flow in a microreactor. Thin oil films generated around the dispersed aqueous phase of the W/O slug prevent the prepared particles from adhesion to the microchannel wall, enabling the continuous production of PMMA particles without clogging. The effects of the linear flow rate of the slug flow and the addition of ethanol in the dispersed aqueous phase on the polymerization are evaluated. It is found that increasing the linear flow rate of the slug flow or the addition of ethanol in the dispersed aqueous phase results in PMMA particles with high molecular weight (≈1500 kg mol−1) in 20 min reaction time. It is believed that this process would be a promising way to prepare polymer particles with high molecular weight in a short reaction time

Nonfunctioning endocrine tumor of the pancreas：A case report

We report a rare case of a very large nonfunctioning endocrine tumor of the pancreas without malignant histological features. A 63-year-old woman referred for appetite loss and general fatigue was found to have a tumor in the pancreas head. Computed tomography demonstrated a well-defined pancreatic tumor 45mm in diameter with hypervascular staining in the pancreas head. Angiography showed a hypervascular tumor of the pancreas head and a dilatation of the anterior superior and posterior superior pancreaticoduodenal arteries. The preoperative diagnosis was an endocrine tumor of the pancreas, with undeniable malignancy. Pylorus-preserving pancreaticoduodenectomy was performed. The histopathological diagnosis was a benign nonfunctioning endocrine tumor of the pancreas based on immunohistochemical staining for Chromogranin A, Synaptophysin, and NSE, but not for hormones. The tumor revealed a low labeling index (<2.0%) of Ki-67 indicating its benign character. No tumor recurrence has been identified in the 18 months since surgery

Upper abdominal body shape is the risk factor for postoperative pancreatic fistula after splenectomy for advanced gastric cancer: A retrospective study

<p>Abstract</p> <p>Background</p> <p>Postoperative pancreas fistula (POPF) is a major complication after total gastrectomy with splenectomy. We retrospectively studied the effects of upper abdominal shape on the development of POPF after gastrectomy.</p> <p>Methods</p> <p>Fifty patients who underwent total gastrectomy with splenectomy were studied. The maximum vertical distance measured by computed tomography (CT) between the anterior abdominal skin and the back skin (U-APD) and the maximum horizontal distance of a plane at a right angle to U-APD (U-TD) were measured at the umbilicus. The distance between the anterior abdominal skin and the root of the celiac artery (CAD) and the distance of a horizontal plane at a right angle to CAD (CATD) were measured at the root of the celiac artery. The CA depth ratio (CAD/CATD) was calculated.</p> <p>Results</p> <p>POPF occurred in 7 patients (14.0%) and was associated with a higher BMI, longer CAD, and higher CA depth ratio. However, CATD, U-APD, and U-TD did not differ significantly between patients with and those without POPF. Logistic-regression analysis revealed that a high BMI (≥25) and a high CA depth ratio (≥0.370) independently predicted the occurrence of POPF (odds ratio = 19.007, p = 0.002; odds ratio = 13.656, p = 0.038, respectively).</p> <p>Conclusion</p> <p>Surgical procedures such as total gastrectomy with splenectomy should be very carefully executed in obese patients or patients with a deep abdominal cavity to decrease the risk of postoperative pancreatic fistula. BMI and body shape can predict the risk of POPF simply by CT.</p

Endothelial Dysfunction, Increased Arterial Stiffness, and Cardiovascular Risk Prediction in Patients With Coronary Artery Disease: FMD‐J (Flow‐Mediated Dilation Japan) Study A

BackgroundThe usefulness of vascular function tests for management of patients with a history of coronary artery disease is not fully known.Methods and ResultsWe measured flow‐mediated vasodilation (FMD) and brachial–ankle pulse wave velocity (baPWV) in 462 patients with coronary artery disease for assessment of the predictive value of FMD and baPWV for future cardiovascular events in a prospective multicenter observational study. The first primary outcome was coronary events, and the second primary outcome was a composite of coronary events, stroke, heart failure, and sudden death. During a median follow‐up period of 49.2 months, the first primary outcome occurred in 56 patients and the second primary outcome occurred in 66 patients. FMD above the cutoff value of 7.1%, derived from receiver‐operator curve analyses for the first and second primary outcomes, was significantly associated with lower risk of the first (hazard ratio, 0.27; 95% confidence interval, 0.06–0.74; P=0.008) and second (hazard ratio, 0.32; 95% confidence interval, 0.09–0.79; P=0.01) primary outcomes. baPWV above the cutoff value of 1731 cm/s was significantly associated with higher risk of the first (hazard ratio, 1.86; 95% confidence interval, 1.01–3.44; P=0.04) and second (hazard ratio, 2.19; 95% confidence interval, 1.23–3.90; P=0.008) primary outcomes. Among 4 groups stratified according to the combination of cutoff values of FMD and baPWV, stepwise increases in the calculated risk ratio for the first and second primary outcomes were observed.ConclusionsIn patients with coronary artery disease, both FMD and baPWV were significant predictors of cardiovascular events. The combination of FMD and baPWV provided further cardiovascular risk stratification

FMD, PWV, and Cardiovascular Events

Background The usefulness of vascular function tests for management of patients with a history of coronary artery disease is not fully known. Methods and Results We measured flow‐mediated vasodilation (FMD) and brachial–ankle pulse wave velocity (baPWV) in 462 patients with coronary artery disease for assessment of the predictive value of FMD and baPWV for future cardiovascular events in a prospective multicenter observational study. The first primary outcome was coronary events, and the second primary outcome was a composite of coronary events, stroke, heart failure, and sudden death. During a median follow‐up period of 49.2 months, the first primary outcome occurred in 56 patients and the second primary outcome occurred in 66 patients. FMD above the cutoff value of 7.1%, derived from receiver‐operator curve analyses for the first and second primary outcomes, was significantly associated with lower risk of the first (hazard ratio, 0.27; 95% confidence interval, 0.06–0.74; P=0.008) and second (hazard ratio, 0.32; 95% confidence interval, 0.09–0.79; P=0.01) primary outcomes. baPWV above the cutoff value of 1731 cm/s was significantly associated with higher risk of the first (hazard ratio, 1.86; 95% confidence interval, 1.01–3.44; P=0.04) and second (hazard ratio, 2.19; 95% confidence interval, 1.23–3.90; P=0.008) primary outcomes. Among 4 groups stratified according to the combination of cutoff values of FMD and baPWV, stepwise increases in the calculated risk ratio for the first and second primary outcomes were observed. Conclusions In patients with coronary artery disease, both FMD and baPWV were significant predictors of cardiovascular events. The combination of FMD and baPWV provided further cardiovascular risk stratification

Rapid Synthesis of Poly(methyl methacrylate) Particles with High Molecular Weight by Soap‐Free Emulsion Polymerization Using Water‐in‐Oil Slug Flow

flow process for the production of poly(methyl methacrylate) (PMMA) particles is proposed by soap‐free emulsion polymerization using a water‐in‐oil (W/O) slug flow in a microreactor. Thin oil films generated around the dispersed aqueous phase of the W/O slug prevent the prepared particles from adhesion to the microchannel wall, enabling the continuous production of PMMA particles without clogging. The effects of the linear flow rate of the slug flow and the addition of ethanol in the dispersed aqueous phase on the polymerization are evaluated. It is found that increasing the linear flow rate of the slug flow or the addition of ethanol in the dispersed aqueous phase results in PMMA particles with high molecular weight (≈1500 kg mol−1) in 20 min reaction time. It is believed that this process would be a promising way to prepare polymer particles with high molecular weight in a short reaction time