Solid state switch provides high input-to-output isolation

Switch uses a combination of N-channel and P-channel Metal Oxide Semiconductor Field Effect Transistors /MOSFET/ to obtain a normally open switch with no power applied. Series-shunt-series MOSFET switching achieves high input-output isolation

System noise temperature investigation of the DSN S-band polarization diverse systems for the Galileo S-band Contingency Mission

This article describes measurements made at all three Deep Space Network 70-m S-band polarization diverse (SPD) systems to determine and eliminate the cause of the 1-K elevation in follow-up noise temperature in the listen-only mode of the SPD systems at DSS 43 and DSS 63. The system noise temperatures obtained after finding and correcting the cause of the elevated follow-up noise temperature are also reported

Tracking the Orbital and Super-orbital Periods of SMC X-1

The High Mass X-ray Binary (HMXB) SMC X-1 demonstrates an orbital variation of 3.89 days and a super-orbital variation with an average length of 55 days. As we show here, however, the length of the super-orbital cycle varies by almost a factor of two, even across adjacent cycles. To study both the orbital and super-orbital variation we utilize lightcurves from the Rossi X-ray Timing Explorer All Sky Monitor (RXTE-ASM). We employ the orbital ephemeris from Wojdowski et al. (1998) to obtain the average orbital profile, and we show that this profile exhibits complex modulation during non-eclipse phases. Additionally, a very interesting ``bounceback'' in X-ray count rate is seen during mid-orbital eclipse phases, with a softening of the emission during these periods. This bounceback has not been previously identified in pointed observations. We then define a super-orbital ephemeris (the phase of the super-orbital cycle as a function of date) based on the ASM lightcurve and analyze the trend and distribution of super-orbital cycle lengths. SMC X-1 exhibits a bimodal distribution of these lengths, similar to what has been observed in other systems (e.g., Her X-1), but with more dramatic changes in cycle length. There is some hint, but not conclusive evidence, for a dependence of the super-orbital cycle length upon the underlying orbital period, as has been observed previously for Her X-1 and Cyg X-2. Using our super-orbital ephemeris we are also able to create an average super-orbital profile over the 71 observed cycles, for which we witness overall hardening of the spectrum during low count rate times. We combine the orbital and super-orbital ephemerides to study the correlation between the orbital and super-orbital variations in the system.Comment: 10 pages, using emulateapj style. To be published in the Astrophysical Journa

Progress Report for Diffusion Welding of the NGNP Process Application Heat Exchangers

The U.S. Department of Energy selected the high temperature gas-cooled reactor as the basis for the Next Generation Nuclear Plant (NGNP). The NGNP will demonstrate the use of nuclear power for electricity, hydrogen production, and process heat applications. The NGNP Project is currently investigating the use of metallic, diffusion welded, compact heat exchangers to transfer heat from the primary (reactor side) heat transport system to the secondary heat transport system. An intermediate heat exchanger will transfer this heat to downstream applications such as hydrogen production, process heat, and electricity generation. The channeled plates that make up the heat transfer surfaces of the intermediate heat exchanger will have to be assembled into an array by diffusion welding. This report describes the preliminary results of a scoping study that evaluated the diffusion welding process parameters and the resultant mechanical properties of diffusion welded joints using Alloy 800H. The long-term goal of the program is to progress towards demonstration of small heat exchanger unit cells fabricated with diffusion welds. Demonstration through mechanical testing of the unit cells will support American Society of Mechanical Engineers rules and standards development, reduce technical risk, and provide proof of concept for heat exchanger fabrication methods needed to deploy heat exchangers in several potential NGNP configurations.1 Researchers also evaluated the usefulness of modern thermodynamic and diffusion computational tools (Thermo-Calc and Dictra) in optimizing the parameters for diffusion welding of Alloy 800H. The modeling efforts suggested a temperature of 1150 C for 1 hour with an applied pressure of 5 MPa using 15 {micro}m nickel foil as joint filler to reduce chromium oxidation on the welded surfaces. Good agreement between modeled and experimentally determined concentration gradients was achieve

Photometric analysis of a space shuttle water venting

Presented here is a preliminary interpretation of a recent experiment conducted on Space Shuttle Discovery (Mission STS 29) in which a stream of liquid supply water was vented into space at twilight. The data consist of video images of the sunlight-scattering water/ice particle cloud that formed, taken by visible light-sensitive intensified cameras both onboard the spacecraft and at the AMOS ground station near the trajectory's nadir. This experiment was undertaken to study the phenomenology of water columns injected into the low-Earth orbital environment, and to provide information about the lifetime of ice particles that may recontact Space Shuttle orbits later. The findings about the composition of the cloud have relevance to ionospheric plasma depletion experiments and to the dynamics of the interaction of orbiting spacecraft with the environment

Fertilizer inspection, analysis and use, 1945

Cover title

Rations for livestock and poultry.

Caption title.Digitized 2006 AES MoU.Rations for dairy cattle / A.C. Ragsdale -- Rations for beef cattle ; Practical swine rations ; Rations for sheep / E. A. Trowbridge -- Rations for poultry / H.L. Kempster

Localized Corrosion of a Neutron Absorbing Ni-Cr-Mo-Gd Alloy

The National Spent Nuclear Fuel Program, located at the Idaho National Laboratory (INL), has developed a new nickel-chromium-molybdenum-gadolinium structural alloy for storage and long-term disposal of spent nuclear fuel (SNF). The new alloy will be used for SNF storage container inserts for nuclear criticality control. Gadolinium has been chosen as the neutron absorption alloying element due to its high thermal neutron absorption cross section. This alloy must be resistant to localized corrosion when exposed to postulated Yucca Mountain in-package chemistries. The corrosion resistance properties of three experimental heats of this alloy are presented. The alloys performance are be compared to Alloy 22 and borated stainless steel. The results show that initially the new Ni-Cr-Mo-Gd alloy is less resistant to corrosion as compared to another Ni-Cr-Mo-Gd alloy (Alloy 22); but when the secondary phase that contains gadolinium (gadolinide) is dissolved, the alloy surface becomes passive. The focus of this work is to qualify these gadolinium containing materials for ASME code qualification and acceptance in the Yucca Mountain Repository

Progress Report for Diffusion Welding of the NGNP Process Application Heat Exchangers

The U.S. Department of Energy selected the high temperature gas-cooled reactor as the basis for the Next Generation Nuclear Plant (NGNP). The NGNP will demonstrate the use of nuclear power for electricity, hydrogen production, and process heat applications. The NGNP Project is currently investigating the use of metallic, diffusion welded, compact heat exchangers to transfer heat from the primary (reactor side) heat transport system to the secondary heat transport system. An intermediate heat exchanger will transfer this heat to downstream applications such as hydrogen production, process heat, and electricity generation. The channeled plates that make up the heat transfer surfaces of the intermediate heat exchanger will have to be assembled into an array by diffusion welding. This report describes the preliminary results of a scoping study that evaluated the diffusion welding process parameters and the resultant mechanical properties of diffusion welded joints using Alloy 800H. The long-term goal of the program is to progress towards demonstration of small heat exchanger unit cells fabricated with diffusion welds. Demonstration through mechanical testing of the unit cells will support American Society of Mechanical Engineers rules and standards development, reduce technical risk, and provide proof of concept for heat exchanger fabrication methods needed to deploy heat exchangers in several potential NGNP configurations.1 Researchers also evaluated the usefulness of modern thermodynamic and diffusion computational tools (Thermo-Calc and Dictra) in optimizing the parameters for diffusion welding of Alloy 800H. The modeling efforts suggested a temperature of 1150 C for 1 hour with an applied pressure of 5 MPa using 15 {micro}m nickel foil as joint filler to reduce chromium oxidation on the welded surfaces. Good agreement between modeled and experimentally determined concentration gradients was achieve

General and Localized Corrosion of Borated Stainless Steels

The Transportation, Aging and Disposal (TAD) canister-based system is being proposed to transport and store spent nuclear fuel at the Monitored Geologic Repository (MGR) located at Yucca Mountain, Nevada. The preliminary design of this system identifies borated stainless steel as the neutron absorber material that will be used to fabricate fuel basket inserts for nuclear criticality control. This paper discusses corrosion test results for verifying the performance of this material manufactured to the requirements of ASTM A887, Grade A, under the expected repository conditions