1,383 research outputs found
Coming clean: understanding and mitigating optical contamination and laser induced damage in advanced LIGO
The cleanliness of optical surfaces is of great concern as the Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO) project transitions from installation to operation at full power. More particulates than expected were observed on and near the core optics as a result of assembly and installation work, prompting a re-evaluation of longheld contamination control practices. Even low particulate levels can potentially damage the fused silica optics and reduce overall interferometer sensitivity. These risks are mitigated from a combination of the following approaches: quantifying the extent of the contamination, identifying its sources, improving practices to reduce the generation of particulates, introducing a non-contact in-situ cleaning technique for suspended optics in air, qualifying cleanliness levels against induced damage, and developing methods for remotely measuring and cleaning suspended optics under vacuum. While significant progress has been made in understanding and mitigating contamination, and thus, protecting the optics from losses and damage, there is still more work to be done to reach ultimate performance requirements
An investigation of eddy-current damping of multi-stage pendulum suspensions for use in interferometric gravitational wave detectors
In this article we discuss theoretical and experimental investigations of the use of eddy-current damping for multi-stage pendulum suspensions such as those intended for use in Advanced LIGO, the proposed upgrade to LIGO (the US laser interferometric gravitational-wave observatory). The design of these suspensions is based on the triple pendulum suspension design developed for GEO 600, the German/UK interferometric gravitational wave detector, currently being commissioned. In that detector all the low frequency resonant modes of the triple pendulums are damped by control systems using collocated sensing and feedback at the highest mass of each pendulum, so that significant attenuation of noise associated with this so-called local control is achieved at the test masses. To achieve the more stringent noise levels planned for Advanced LIGO, the GEO 600 local control design needs some modification. Here we address one particular approach, namely that of using eddy-current damping as a replacement or supplement to active damping for some or all of the modes of the pendulums. We show that eddy-current damping is indeed a practical alternative to the development of very low noise sensors for active damping of triple pendulums, and may also have application to the heavier quadruple pendulums at a reduced level of damping
Polyelectrolyte Multilayering on a Charged Planar Surface
The adsorption of highly \textit{oppositely} charged flexible
polyelectrolytes (PEs) on a charged planar substrate is investigated by means
of Monte Carlo (MC) simulations. We study in detail the equilibrium structure
of the first few PE layers. The influence of the chain length and of a (extra)
non-electrostatic short range attraction between the polycations and the
negatively charged substrate is considered. We show that the stability as well
as the microstructure of the PE layers are especially sensitive to the strength
of this latter interaction. Qualitative agreement is reached with some recent
experiments.Comment: 28 pages; 11 (main) Figs - Revtex4 - Higher resolution Figs can be
obtained upon request. To appear in Macromolecule
Multicanonical Hybrid Monte Carlo: Boosting Simulations of Compact QED
We demonstrate that substantial progress can be achieved in the study of the
phase structure of 4-dimensional compact QED by a joint use of hybrid Monte
Carlo and multicanonical algorithms, through an efficient parallel
implementation. This is borne out by the observation of considerable speedup of
tunnelling between the metastable states, close to the phase transition, on the
Wilson line. We estimate that the creation of adequate samples (with order 100
flip-flops) becomes a matter of half a year's runtime at 2 Gflops sustained
performance for lattices of size up to 24^4.Comment: 15 pages, 8 figure
Phase Behavior of Bent-Core Molecules
Recently, a new class of smectic liquid crystal phases (SmCP phases)
characterized by the spontaneous formation of macroscopic chiral domains from
achiral bent-core molecules has been discovered. We have carried out Monte
Carlo simulations of a minimal hard spherocylinder dimer model to investigate
the role of excluded volume interations in determining the phase behavior of
bent-core materials and to probe the molecular origins of polar and chiral
symmetry breaking. We present the phase diagram as a function of pressure or
density and dimer opening angle . With decreasing , a transition
from a nonpolar to a polar smectic phase is observed near ,
and the nematic phase becomes thermodynamically unstable for . No chiral smectic or biaxial nematic phases were found.Comment: 4 pages Revtex, 3 eps figures (included
Grundstate Properties of the 3D Ising Spin Glass
We study zero--temperature properties of the 3d Edwards--Anderson Ising spin
glass on finite lattices up to size . Using multicanonical sampling we
generate large numbers of groundstate configurations in thermal equilibrium.
Finite size scaling with a zero--temperature scaling exponent describes the data well. Alternatively, a descriptions in terms of Parisi
mean field behaviour is still possible. The two scenarios give significantly
different predictions on lattices of size .Comment: LATEX 9pages,figures upon request ,SCRI-9
Hydration interactions: aqueous solvent effects in electric double layers
A model for ionic solutions with an attractive short-range pair interaction
between the ions is presented. The short-range interaction is accounted for by
adding a quadratic non-local term to the Poisson-Boltzmann free energy. The
model is used to study solvent effects in a planar electric double layer. The
counter-ion density is found to increase near the charged surface, as compared
with the Poisson-Boltzmann theory, and to decrease at larger distances. The ion
density profile is studied analytically in the case where the ion distribution
near the plate is dominated only by counter-ions. Further away from the plate
the density distribution can be described using a Poisson-Boltzmann theory with
an effective surface charge that is smaller than the actual one.Comment: 11 Figures in 13 files + LaTex file. 20 pages. Accepted to Phys. Rev.
E. Corrected typos and reference
Free energy barrier for melittin reorientation from a membrane-bound state to a transmembrane state
An important step in a phospholipid membrane pore formation by melittin
antimicrobial peptide is a reorientation of the peptide from a surface into a
transmembrane conformation. In this work we perform umbrella sampling
simulations to calculate the potential of mean force (PMF) for the
reorientation of melittin from a surface-bound state to a transmembrane state
and provide a molecular level insight into understanding peptide and lipid
properties that influence the existence of the free energy barrier. The PMFs
were calculated for a peptide to lipid (P/L) ratio of 1/128 and 4/128. We
observe that the free energy barrier is reduced when the P/L ratio increased.
In addition, we study the cooperative effect; specifically we investigate if
the barrier is smaller for a second melittin reorientation, given that another
neighboring melittin was already in the transmembrane state. We observe that
indeed the barrier of the PMF curve is reduced in this case, thus confirming
the presence of a cooperative effect
- …