32 research outputs found
One-Dimensional Convolutional Neural Network for Pipe Jacking EPB TBM Cutter Wear Prediction
An earth pressure balance (EPB) TBM is used in soft ground conditions, and these conditions lead to the fluctuation and instability of machine parameters. Machine parameters influence cutter wear and tunnel excavation. For this reason, to evaluate and predict the cutter wear of an EPB TBM, a 1D CNN model was used to provide machine-parameter-based cutter wear prediction using an EPB TBM operational dataset. The machine parameters were split into 80% training and 20% test datasets. Compared to traditional machine learning applications and two deep neural network models, the proposed model provided reliable results with a reasonable computational time. The correlation coefficient was 89.6% R-2, the mean squared error (MSE) was 57.6, the mean absolute error (MAE) was 1.6, and the computational wall time was 3 min 22 s
Research on vibration-based early diagnostic system for excavator motor bearing using 1-D CNN
In mining, super-large machines such as rope excavators are used to perform the main mining operations. A rope excavator is equipped with motors that drive mechanisms. Motors are easily damaged as a result of harsh mining conditions. Bearings are important parts in a motor; bearing failure accounts for approximately half of all motor failures. Failure reduces work efficiency and increases maintenance costs. In practice, reactive, preventive, and predictive maintenance are used to minimize failures. Predictive maintenance can prevent failures and is more effective than other maintenance. For effective predictive maintenance, a good diagnosis is required to accurately determine motor-bearing health. In this study, vibration-based diagnosis and a one-dimensional convolutional neural network (1-D CNN) were used to evaluate bearing deterioration levels. The system allows for early diagnosis of bearing failures. Normal and failure-bearing vibrations were measured. Spectral and wavelet analyses were performed to determine the normal and failure vibration features. The measured signals were used to generate new data to represent bearing deterioration in increments of 10%. A reliable diagnosis system was proposed. The proposed system could determine bearing health deterioration at eleven levels with considerable accuracy. Moreover, a new data mixing method was applied
Mutual superimposing of SAR and ground-level shooting images mediated by intermediate multi-altitude images
When satellite-based SAR (Synthetic Aperture Radar) images and images acquired from the ground are registered, they offer a wealth of information such as topographic, vegetation or water surface to be extracted from the ground-level shooting images. Simultaneously, high temporal-resolution and high spatial-resolution information obtained by the ground-level shooting images can be superimposed on satellite images. However, due to the differences in imaging modality, spatial resolutions, and observation angle, it was not easy to directly extract the corresponding points between them. This paper proposes an image registration method to estimate the correspondence between SAR images and ground-level shooting images through a set of multi-altitude images taken at different heights
Coupling NCA Dimensionality Reduction with Machine Learning in Multispectral Rock Classification Problems
Though multitudes of industries depend on the mining industry for resources, this industry has taken hits in terms of declining mineral ore grades and its current use of traditional, time-consuming and computationally costly rock and mineral identification methods. Therefore, this paper proposes integrating Hyperspectral Imaging, Neighbourhood Component Analysis (NCA) and Machine Learning (ML) as a combined system that can identify rocks and minerals. Modestly put, hyperspectral imaging gathers electromagnetic signatures of the rocks in hundreds of spectral bands. However, this data suffers from what is termed the \u27dimensionality curse\u27, which led to our employment of NCA as a dimensionality reduction technique. NCA, in turn, highlights the most discriminant feature bands, number of which being dependent on the intended application(s) of this system. Our envisioned application is rock and mineral classification via unmanned aerial vehicle (UAV) drone technology. In this study, we performed a 204-hyperspectral to 5-band multispectral reduction, because current production drones are limited to five multispectral bands sensors. Based on these bands, we applied ML to identify and classify rocks, thereby proving our hypothesis, reducing computational costs, attaining an ML classification accuracy of 71%, and demonstrating the potential mining industry optimisations attainable through this integrated system
Model Scaling in Smartphone GNSS-Aided Photogrammetry for Fragmentation Size Distribution Estimation
Fragmentation size distribution estimation is a critical process in mining operations that employ blasting. In this study, we aim to create a low-cost, efficient system for producing a scaled 3D model without the use of ground truth data, such as GCPs (Ground Control Points), for the purpose of improving fragmentation size distribution measurement using GNSS (Global Navigation Satellite System)-aided photogrammetry. However, the inherent error of GNSS data inhibits a straight-forward application in Structure-from-Motion (SfM). To overcome this, the study proposes that, by increasing the number of photos used in the SfM process, the scale error brought about by the GNSS error will proportionally decrease. Experiments indicated that constraining camera positions to locations, relative or otherwise, improved the accuracy of the generated 3D model. In further experiments, the results showed that the scale error decreased when more images from the same dataset were used. The proposed method is practical and easy to transport as it only requires a smartphone and, optionally, a separate camera. In conclusion, with some modifications to the workflow, technique, and equipment, a muckpile can be accurately recreated in scale in the digital world with the use of positional data
Use of a DNN-Based Image Translator with Edge Enhancement Technique to Estimate Correspondence between SAR and Optical Images
In this paper, the local correspondence between synthetic aperture radar (SAR) images and optical images is proposed using an image feature-based keypoint-matching algorithm. To achieve accurate matching, common image features were obtained at the corresponding locations. Since the appearance of SAR and optical images is different, it was difficult to find similar features to account for geometric corrections. In this work, an image translator, which was built with a DNN (deep neural network) and trained by conditional generative adversarial networks (cGANs) with edge enhancement, was employed to find the corresponding locations between SAR and optical images. When using conventional cGANs, many blurs appear in the translated images and they degrade keypoint-matching accuracy. Therefore, a novel method applying an edge enhancement filter in the cGANs structure was proposed to find the corresponding points between SAR and optical images to accurately register images from different sensors. The results suggested that the proposed method could accurately estimate the corresponding points between SAR and optical images
Spectral Angle Mapping and AI Methods Applied in Automatic Identification of Placer Deposit Magnetite Using Multispectral Camera Mounted on UAV
The use of drones in mining environments is one way in which data pertaining to the state of a site in various industries can be remotely collected. This paper proposes a combined system that employs a 6-bands multispectral image capturing camera mounted on an Unmanned Aerial Vehicle (UAV) drone, Spectral Angle Mapping (SAM), as well as Artificial Intelligence (AI). Depth possessing multispectral data were captured at different flight elevations. This was in an attempt to find the best elevation where remote identification of magnetite iron sands via the UAV drone specialized in collecting spectral information at a minimum accuracy of +/- 16 nm was possible. Data were analyzed via SAM to deduce the cosine similarity thresholds at each elevation. Using these thresholds, AI algorithms specialized in classifying imagery data were trained and tested to find the best performing model at classifying magnetite iron sand. Considering the post flight logs, the spatial area coverage of 338 m(2), a global classification accuracy of 99.7%, as well the per-class precision of 99.4%, the 20 m flight elevation outputs presented the best performance ratios overall. Thus, the positive outputs of this study suggest viability in a variety of mining and mineral engineering practices
Application of Bayesian Neural Network (BNN) for the Prediction of Blast-Induced Ground Vibration
Rock blasting is one of the most common and cost-effective excavation techniques. However, rock blasting has various negative environmental effects, such as air overpressure, fly rock, and ground vibration. Ground vibration is the most hazardous of these inevitable impacts since it has a negative impact not only on the environment of the surrounding area but also on the human population and the rock itself. The PPV is the most critical base parameter practice for understanding, evaluating, and predicting ground vibration in terms of vibration velocity. This study aims to predict the blast-induced ground vibration of the Mikurahana quarry, using Bayesian neural network (BNN) and four machine learning techniques, namely, gradient boosting, k-neighbors, decision tree, and random forest. The proposed models were developed using eight input parameters, one output, and one hundred blasting datasets. The assessment of the suitability of one model in comparison to the others was conducted by using different performance evaluation metrics, such as R, RMSE, and MSE. Hence, this study compared the performances of the BNN model with four machine learning regression analyses, and found that the result from the BNN was superior, with a lower error: R = 0.94, RMSE = 0.17, and MSE = 0.03. Finally, after the evaluation of the models, SHAP was performed to describe the importance of the models' features and to avoid the black box issue