Oxygenated and Nitrated Polycyclic Aromatic Hydrocarbons in Ambient Air-Levels, Phase Partitioning, Mass Size Distributions, and Inhalation Bioaccessibility

Among the nitrated and oxygenated polycyclic aromatic hydrocarbons (NPAHs and OPAHs) are some of the most hazardous substances to public health, mainly because of their carcinogenicity and oxidative potential. Despite these concerns, the concentrations and fate of NPAHs and OPAHs in the atmospheric environment are largely unknown. Ambient air concentrations of 18 NPAHs, 5 quinones, and 5 other OPAHs were determined at two urban and one regional background sites in central Europe. At one of the urban sites, the total (gas and particulate) concentrations of Sigma(10)OPAHs were 10.0 +/- 9.2 ng/m(3) in winter and 3.5 +/- 1.6 ng/m(3) in summer. The gradient to the regional background site exceeded 1 order of magnitude. Sigma(18)NPAH concentrations were typically 1 order of magnitude lower than OPAHs. Among OPAHs, 9-fluorenone and (9,10)-anthraquinone were the most abundant species, accompanied by benzanthrone in winter. (9,10)-Anthraquinone represented two-thirds of quinones. We found that a large fraction of the target substance particulate mass was carried by submicrometer particles. The derived inhalation bioaccessibility in the PM10 size fraction is found to be approximate to 5% of the total ambient concentration of OPAHs and up to approximate to 2% for NPAHs. For 9-fluorenone and (9,10)-anthraquinone, up to 86 and 18%, respectively, were found at the rural site. Our results indicate that water solubility could function as a limiting factor for bioaccessibility of inhaled particulate NPAHs and OPAHs, without considerable effect of surfactant lipids and proteins in the lung lining fluid

Impact of biogenic SOA loading on the molecular composition of wintertime PM2.5 in urban Tianjin: an insight from Fourier transform ion cyclotron resonance mass spectrometry

Biomass burning is one of the key sources of urban aerosols in the North China Plain, especially in winter when the impact of secondary organic aerosols (SOA) formed from biogenic volatile organic compounds (BVOCs) is generally considered to be minor. However, little is known about the influence of biogenic SOA loading on the molecular composition of wintertime organic aerosols. Here, we investigated the water-soluble organic compounds in fine particles (PM2.5) from urban Tianjin by ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Our results show that most of the CHO and CHON compounds were derived from biomass burning; they contain O-poor and highly unsaturated compounds with aromatic rings, which are sensitive to photochemical reactions, and some of which probably contribute to light-absorbing chromophores. Under moderate to high SOA loading conditions, the nocturnal chemistry is more efficient than photooxidation to generate secondary CHO and CHON compounds with high oxygen content. Under low SOA-loading, secondary CHO and CHON compounds with low oxygen content are mainly formed by photochemistry. Secondary CHO compounds are mainly derived from oxidation of monoterpenes. But nocturnal chemistry may be more productive to sesquiterpene-derived CHON compounds. In contrast, the number- and intensity-weight of S-containing groups (CHOS and CHONS) increased significantly with the increase of biogenic SOA-loading, which agrees with the fact that a majority of the S-containing groups are identified as organosulfates and nitrooxy-organosulfates that are derived from the oxidation of BVOCs. Terpenes may be potential major contributors to the chemical diversity of organosulfates and nitrooxy-organosulfates under photo-oxidation. While the nocturnal chemistry is more beneficial to the formation of organosulfates and nitrooxy-organosulfates under low SOA-loading. The SOA-loading is an important factor associating with the oxidation degree, nitrate group content and chemodiversity of nitrooxy-organosulfates. Furthermore, our study suggests that the hydrolysis of nitrooxy-organosulfates is a possible pathway for the formation of organosulfates.</p

Aqueous-phase reactive species formed by fine particulate matter from remote forests and polluted urban air

In the aqueous phase, fine particulate matter can form reactive species (RS) that influence the aging, properties, and health effects of atmospheric aerosols. In this study, we explore the RS yields of aerosol samples from a remote forest (Hyytiala, Finland) and polluted urban locations (Mainz, Germany; Beijing, China), and we relate the RS yields to different chemical constituents and reaction mechanisms. Ultra-high-resolution mass spectrometry was used to characterize organic aerosol composition, electron paramagnetic resonance (EPR) spectroscopy with a spin-trapping technique was applied to determine the concentrations of (OH)-O-center dot, O-2(center dot-), and carbon-or oxygen-centered organic radicals, and a fluorometric assay was used to quantify H2O2. The aqueous H2O2-forming potential per mass unit of ambient PM2.5 (particle diameter < 2.5 mu m) was roughly the same for all investigated samples, whereas the mass-specific yields of radicals were lower for sampling sites with higher concentrations of PM2.5. The abundances of water-soluble transition metals and aromatics in ambient PM2.5 were positively correlated with the relative fraction of (OH)-O-center dot and negatively correlated with the relative fraction of carbon-centered radicals. In contrast, highly oxygenated organic molecules (HOM) were positively correlated with the relative fraction of carbon-centered radicals and negatively correlated with the relative fraction of (OH)-O-center dot. Moreover, we found that the relative fractions of different types of radicals formed by ambient PM2.5 were comparable to surrogate mixtures comprising transition metal ions, organic hydroperoxide, H2O2, and humic or fulvic acids. The interplay of transition metal ions (e.g., iron and copper ions), highly oxidized organic molecules (e.g., hydroperoxides), and complexing or scavenging agents (e.g., humic or fulvic acids) leads to nonlinear concentration dependencies in aqueous-phase RS production. A strong dependence on chemical composition was also observed for the aqueous-phase radical yields of laboratory-generated secondary organic aerosols (SOA) from precursor mixtures of naphthalene and beta-pinene. Our findings show how the composition of PM2.5 can influence the amount and nature of aqueous-phase RS, which may explain differences in the chemical reactivity and health effects of particulate matter in clean and polluted air.Peer reviewe

Fatigue Life Prediction of Half-Shaft Using the Strain-Life Method

Fatigue life prediction is an important part of the reliability and durability analysis of automobile components. Based on Wang and Brown’s framework, multiaxial random fatigue damage was adopted to predict the fatigue life of half-shaft. The stress analysis of half-shaft was resolved analytically to determine the local stress tensor in the potential area of fracture. The maximum shear strain fatigue damage parameter and the normal stress fatigue damage parameter were evaluated to predict the fatigue life of half-shaft. The results show that the prediction method is reliable and meets the service life and safety requirements

The maximum carbonyl ratio (MCR) as a new index for the structural classification of secondary organic aerosol components

Rationale Organic aerosols (OA) account for a large fraction of atmospheric fine particulate matter and thus are affecting climate and public health. Elucidation of the chemical composition of OA is the key for addressing the role of ambient fine particles at the atmosphere-biosphere interface and mass spectrometry is the main method to achieve this goal. Methods High-resolution mass spectrometry (HRMS) is on its way to becoming one of the most prominent analytical techniques, also for the analysis of atmospheric aerosols. The combination of high mass resolution and accurate mass determination allows the elemental compositions of numerous compounds to be easily elucidated. Here a new parameter for the improved classification of OA is introduced - the maximum carbonyl ratio (MCR) - which is directly derived from the molecular composition and is particularly suitable for the identification and characterization of secondary organic aerosols (SOA). Results The concept is exemplified by the analysis of ambient OA samples from two measurement sites (Hyytiala, Finland; Beijing, China) and of laboratory-generated SOA based on ultrahigh-performance liquid chromatography (UHPLC) coupled to Orbitrap MS. To interpret the results, MCR-Van Krevelen (VK) diagrams are generated for the different OA samples and the individual compounds are categorized into specific areas in the diagrams. The results show that the MCR index is a valuable parameter for representing atmospheric SOA components in composition and structure-dependent visualization tools such as VK diagrams. Conclusions The MCR index is suggested as a tool for a better characterization of the sources and the processing of atmospheric OA components based on HRMS data. Since the MCR contains information on the concentration of highly electrophilic organic compounds in particulate matter (PM) as well as on the concentration of organic (hydro)peroxides, the MCR could be a promising metric for identifying health-related particulate matter parameters by HRMS

Re-Os dating of molybdenite from the Kafang skarn copper (tin) deposit in the Gejiu tin polymetallic ore district and its geological significance

The Gejiu tin polymetallic ore district is a famous tin polymetallic ore producing area in Yunnan Province. The Kafang skarn copper (tin) deposit is one of important mineral deposits of the Gejiu region. Re-Os dating of five molybdenite separated from the Kafang skarn ore bodies gives an isochron age of 83.4 ± 2.1Ma and model age ranges from 82.95 ± 1.16 to 83.54 ± 1.31 Ma. This age is in good agreement with Laoka granite zircon LA-ICP-MS U-Pb age(85 ± 0.85Ma). These ages suggest that the mineralization in the Kafang skarn deposit was genetically assoicatted to the Laoka granite. The Re contents of molybdenite indicate that ore-forming materials are derived from mantle and crust. Based on the geochronological data of Dulong Sn-Zn deposit, Bainiuchang Ag super-large deposit, Dachang tin polymetallic ore field and Wangshe Cu-W deposit and analysis of tectonic evolution of Southeast of Yunnan Province, we propose that these deposits occurred at the same geodynamic framework as a result of large scale mineralization in South China