Symmetric and asymmetric shocked gas jets for laser-plasma experiments

International audienceShocks in supersonic flows offer both high density and sharp density gradients that are used, for instance, for gradient injection in laser-plasma accelerators. We report on a parametric study of oblique shocks created by inserting a straight axisymmetric section at the end of a supersonic “de Laval” nozzle. The effect of different parameters, such as the throat diameter and straight section length on the shock position and density, is studied through computational fluid dynamics (CFD) simulations. Experimental characterizations of a shocked nozzle are compared to CFD simulations and found to be in good agreement. We then introduce a newly designed asymmetric shocked gas jet, where the straight section is only present on one lateral side of the nozzle, thus providing a gas profile well adapted for density transition injection. In this case, full-3D fluid simulations and experimental measurements are compared and show excellent agreement

Demonstration of stable long-term operation of a kilohertz laser-plasma accelerator

International audienceWe report on the stable and continuous operation of a kilohertz laser-plasma accelerator. Electron bunches with 2.6 pC charge and 2.5 MeV peak energy were generated via injection and trapping in a downward plasma density ramp. This density transition was produced in a specially designed asymmetrically shocked gas jet. The reproducibility of the electron source was also assessed over a period of a week and found to be satisfactory with similar values of the beam charge and energy. Particle in cell simulations confirm the role of the shock and the density transition in the electron injection mechanism. These results show that the reproducibility and stability of the laser-plasma accelerator are greatly enhanced on the long-term scale when using a robust scheme for density gradient injection

Optimization and stabilization of a kilohertz laser-plasma accelerator

Article No. 033105Laser-plasma acceleration at kilohertz repetition rates has recently been shown to work in two different regimes with pulse lengths of either 30 fs or 3.5 fs. We now report on a systematic study in which a large range of pulse durations and plasma densities were investigated through continuous tuning of the laser spectral bandwidth. Indeed, two laser-plasma accelerator (LPA) processes can be distinguished, where beams of the highest quality, with a charge of 5.4 pC and a spectrum peaked at 2-2.5MeV, are obtained with short pulses propagating at moderate plasma densities. Through particle-in-cell (PIC) simulations, the two different acceleration processes are thoroughly explained. Finally, we proceed to show the results of a 5-h continuous and stable run of our LPA accelerator accumulating more than 18 x 10 6 consecutive shots, with a charge of 2.6 pC and a peaked 2.5MeV spectrum. A parametric study of the influence of the laser driver energy through PIC simulations underlines that this unprecedented stability was obtained thanks to micro-scale density gradient injection. Together, these results represent an important step toward stable laser-plasma accelerated electron beams at kilohertz repetition ratesFizikos katedraFizinių ir technologijos mokslų centrasFizinių ir technologijos mokslų centras, VilniusVytauto Didžiojo universiteta

Optimization and stabilization of a kilohertz laser-plasma accelerator

Laser–plasma acceleration at kilohertz repetition rates has recently been shown to work in two different regimes with pulse lengths of either 30 fs or 3.5 fs. We now report on a systematic study in which a large range of pulse durations and plasma densities were investigated through continuous tuning of the laser spectral bandwidth. Indeed, two laser–plasma accelerator (LPA) processes can be distinguished, where beams of the highest quality, with a charge of 5.4 pC and a spectrum peaked at 2–2.5 MeV, are obtained with short pulses propagating at moderate plasma densities. Through particle-in-cell (PIC) simulations, the two different acceleration processes are thoroughly explained. Finally, we proceed to show the results of a 5-h continuous and stable run of our LPA accelerator accumulating more than 18 ???? 106 consecutive shots, with a charge of 2.6 pC and a peaked 2.5 MeV spectrum. A parametric study of the influence of the laser driver energy through PIC simula- tions underlines that this unprecedented stability was obtained thanks to micro-scale density gradient injection. Together, these results repre- sent an important step toward stable laser–plasma accelerated electron beams at kilohertz repetition rates

Proton and helium ions acceleration in near-critical density gas targets by short-pulse Ti:Sa PW-class laser

International audienceThe ability to quickly refresh gas-jet targets without cycling the vacuum chamber makes them a promising candidate for laser-accelerated ion experiments at high repetition rate. Here we present results from the first high repetition rate ion acceleration experiment on the VEGA-3 PW-class laser at CLPU. A near-critical density gas-jet target was produced by forcing a 1000 bar H $_2$ and He gas mix through bespoke supersonic shock nozzles. Proton energies up to 2 MeV were measured in the laser forward direction and 2.2 MeV transversally. He $^{2+}$ ions up to 5.8 MeV were also measured in the transverse direction. To help maintain a consistent gas density profile over many shots, nozzles were designed to produce a high-density shock at distances larger than 1 mm from the nozzle exit. We outline a procedure for optimizing the laser–gas interaction by translating the nozzle along the laser axis and using different nozzle materials. Several tens of laser interactions were performed with the same nozzle which demonstrates the potential usefulness of gas-jet targets as high repetition rate particle source.</jats:p