Repeatability of tensile properties in high pressure die-castings of an Al-Mg-Si-Mn alloy

© 2015 The Korean Institute of Metals and Materials and Springer Science+Business Media Dordrecht High pressure die-castings of an Al-Mg-Si-Mn alloy have been assessed in terms of the repeatability of the mechanical properties including yield strength, ultimate tensile strength and elongation by the normal standard deviations method and by the Weibull statistical model with three parameters. It was found that the round samples had the maximum Weibull modulus, indicating the best repeatability. The machined samples exhibited the second best of Weibull modulus. Among the square samples, the 2 mm and 5 mm thick samples had the lowest and the highest Weibull modulus respectively, indicating that the repeatability for the castings was influenced by the wall thickness. The microstructural uniformity and porosity levels are critical factors in determining the repeatability of the high pressure die-castings. A less segregation in the microstructure could uniform the stress distribution in the die-castings and a less porosity in the casting could reduce the sources for brittle fracture. These improved the repeatability in casting production.The authors acknowledge the Engineering and Physical Sciences Research Council (EPSRC), Technology Strategy Board (TSB) and Jaguar Land Rover (JLR) in United Kingdom for financial support

A novel AVP gene mutation in a Turkish family with neurohypophyseal diabetes insipidus

Purpose Familial neurohypophyseal diabetes insipidus (FNDI) is a rare, autosomal dominant, inherited disorder which is characterized by severe polydipsia and polyuria generally presenting in early childhood. In the present study, we aimed to analyze the AVP gene in a Turkish family with FNDI

Computer implementation of Heuvers' circle method for thermal optimisation in castings

A method based on geometric reasoning techniques is presented to predict hot spots and use of geometric parameters of a casting to obtain effective interface boundary conditions. The proposed method combines Chvorinov's rule and Heuvers' circle method with the medial axis transformation technique to develop an elegant optimisation technique for the optimal feeding design of castings. The results are validated using a FE based solidification analysis. It has been shown that the method has the ability to constrain heat transfer coefficient values to yield more realistic predictions for foundry practices. The proposed method has a considerable potential to reduce the number of FE simulations that are otherwise needed to achieve an optimal thermal design

an Acute Aortic Ischemia-Reperfusion Model: An Experimental Study

Objective. The objective of this study was to examine the effects of iloprost and N-acetylcysteine (NAC) on ischemia-reperfusion (IR) injuries to the gastrocnemius muscle, following the occlusion-reperfusion period in the abdominal aorta of rats. Materials and Methods. Forty male Sprague-Dawley rats were randomly divided into four equal groups. Group 1: control group. Group 2 (IR): aorta was occluded. The clamp was removed after 1 hour of ischemia. Blood samples and muscle tissue specimens were collected following a 2-hour reperfusion period. Group 3 (IR + iloprost): during a 1-hour ischemia period, iloprost infusion was initiated from the jugular catheter. During a 2-hour reperfusion period, the iloprost infusion continued. Group 4 (IR + NAC): similar to the iloprost group. Findings. The mean total oxidant status, CK, and LDH levels were highest in Group 2 and lowest in Group 1. The levels of these parameters in Group 3 and Group 4 were lower compared to Group 2 and higher compared to Group 1 (P < 0.05). The histopathological examination showed that Group 3 and Group 4, compared to Group 2, had preserved appearance with respect to hemorrhage, necrosis, loss of nuclei, infiltration, and similar parameters. Conclusion. Iloprost and NAC are effective against ischemia-reperfusion injury and decrease ischemia-related tissue injury

Familial acromegaly: A familial report and review of the literature

Familial acromegaly without features of multiple endocrine neoplasie type 1 (MEN 1) is an exceptional clinical entity. We report in this article three cases of acromegaly due to pituitary macroadenomas without any other endocrinopathy in a family. A 31-year-old woman (subject A) and her 34-year-old sister (subject B) with elevated basal rolactin (PRL) levels, elevated growth hormone (GH) levels during the oral glucose tolerance test (OGTT) and a pituitary adenoma in Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) were diagnosed as acromegaly. Subject A was treated only with radiotherapy and Lysuride. Subject B underwent transsphenoidal microsurgical extirpation 15 years ago. 11 years later her 24-year-old son (subject C) also presented with typical signs of acromegaly, elevated basal PRL level and elevated GH levels during OGTT. A pituitary macroadenoma was identified by MRI and he also underwent transsphenoidal adenomectomy. Pathology reports confirmed the diagnosis of GH-secreting pituitary adenoma in subject B and C. Immunocytochemistry revealed that tumours of subject B (> 20% of tumour cells) and C (> 50% of tumour cells) were positive for GH. Tumours of subject B (> 10% of tumour cells) and C (> 50% of tumour cells) also exhibited immunoreactivity for PRL. On investigation of histocompatibility antigens, it was observed that the subject A, B, and C shared the same haplotypes [HLA A24(9), HLA B13(6), HLA 1335, HLA DQ7(3), HLA DR13(6)] and so it is very possible that investigation of HLA antigens in patients with pituitary turnout, contributes to better identification of its familial nature and frequency. Here we describe an acromegaly family and the distributions of HLA antigens