Water quality of Texas bays (nutrients, trace elements and toxic compounds)

This manuscript is designed to compare the nutrient balances and trace element significance in Texas Bays and Estuaries. The task of assigning water quality criteria in all estuarine waters rests with the federal Environmental Protection Agency. However, the Texas Bays and Estuaries represent a unique range of environments of the U.S. Coast that stand alone and therefore must be assigned standards appropriate to the environment. Therefore we have compared several Texas Bays relative to nutrients and trace elements through an analysis of data from our files, a life history data bank from literature survey, a study of the Corpus Christi area, personal communication with a wide range of individuals and information from the Texas Water Quality Board, Texas Water Development Board, the U.S. Geological Survey and the State Health Department.May 30, 1974Taken in part from a report on Development of Biological Criteria, Establishment of Guidelines for Texas Coast Management IAC-(74-75)-0685 NSF RANN-61-34870xMarine Scienc

Interregional and International Competition in the Dairy Industry

International Relations/Trade, Livestock Production/Industries, Marketing,

A Dye-Tracer Technique for Experimentally Obtaining Impingement Characteristics of Arbitrary Bodies and a Method for Determining Droplet Size Distribution

A dye-tracer technique has been developed whereby the quantity of dyed water collected on a blotter-wrapped body exposed to an air stream containing a dyed-water spray cloud can be colorimetrically determined in order to obtain local collection efficiencies, total collection efficiency, and rearward extent of impingement on the body. In addition, a method has been developed whereby the impingement characteristics obtained experimentally for a body can be related to theoretical impingement data for the same body in order to determine the droplet size distribution of the impinging cloud. Several cylinders, a ribbon, and an aspirating device to measure cloud liquid-water content were used in the studies presented herein for the purpose of evaluating the dye-tracer technique. Although the experimental techniques used in the dye-tracer technique require careful control, the methods presented herein should be applicable for any wind tunnel provided the humidity of the air stream can be maintained near saturation

Anomalous nutrient-chlorophyll interrelationships in the offshore eastern tropical Pacific Ocean

In the nutrient-rich offshore areas of the eastern tropical Pacific Ocean, chlorophyll levels were 4-10 times lower than might be expected if all the inorganic nitrogen had been assimilated. Three hypotheses are examined to explain this anomaly: 1) nitrate may be upwelled faster than it is assimilated; 2) the algae may be grazed to lower levels by herbivores; and 3) minor nutrients other than nitrate, phosphate, or silicic acid may be limiting...

Experimental Droplet Impingement on Several Two-Dimensional Airfoils with Thickness Ratios of 6 to 16 Percent

The rate and area of cloud droplet impingement on several two-dimensional swept and unswept airfoils were obtained experimentally in the NACA Lewis icing tunnel with a dye-tracer technique. Airfoil thickness ratios of 6 to 16 percent; angles of attack from 0 deg to 12 deg, and chord sizes from 13 to 96 inches were included in the study. The data were obtained at 152 knots and are extended to other conditions by dimensionless impingement parameters. In general, the data show that the total and local collection efficiencies and impingement limits are primary functions of the modified inertia parameter (in which airspeed, droplet size, and body size are the most significant variables) and the airfoil thickness ratio. Local collection efficiencies and impingement limits also depend on angle of attack. Secondary factors affecting impingement characteristics are airfoil shape, camber, and sweep angle. The impingement characteristics obtained experimentally for the airfoils were within +/-10 percent on the average of the characteristics calculated from theoretical trajectories. Over the range of conditions studied, the experimental data demonstrate that a specific method can be used to predict the impingement characteristics of swept airfoils with large aspect ratios from the data for unswept airfoils of the same series

Reformation of Written Instruments in Missouri

We all make mistakes. The remedy of reformation has developed to facilitate the correction of errors made in committing agreements to writing. The availability of the remedy is the subject of this article. The legal doctrines will be treated generally with the primary focus on the Missouri decisions. This comment begins with a general discussion of the remedy, and then analyzes the theories for relief, the instruments and defects which may be reformed, the parties to the action, and four defenses-the Statute of Frauds,- the petitioner\u27s negligence, the statute of limitations and laches. At the outset it is important to define some basic terms. The phrase complete agreement is used herein to describe the underlying agreement which is the true, actual or real agreement of the parties. The adjective complete implies that the agreement has all of the elements necessary for it to be enforceable, for a court cannot supply a term which is essential to an enforceable contract. The use of this phrase will provide consistency in this comment, although the courts often describe the complete agreement with any or all of the adjectives indicated above. The instrumenting which the parties have attempted to write down the terms of the complete agreement will generally be referred to as -the written instrument. The party seeking reformation will often be referred to as the petitioner. \u2

Bilinear modeling and nonlinear estimation

New methods are illustrated for online nonlinear estimation applied to the lateral deflection of an elastic beam on board measurements of angular rates and angular accelerations. The development of the filter equations, together with practical issues of their numerical solution as developed from global linearization by nonlinear output injection are contrasted with the usual method of the extended Kalman filter (EKF). It is shown how nonlinear estimation due to gyroscopic coupling can be implemented as an adaptive covariance filter using off-the-shelf Kalman filter algorithms. The effect of the global linearization by nonlinear output injection is to introduce a change of coordinates in which only the process noise covariance is to be updated in online implementation. This is in contrast to the computational approach which arises in EKF methods arising by local linearization with respect to the current conditional mean. Processing refinements for nonlinear estimation based on optimal, nonlinear interpolation between observations are also highlighted. In these methods the extrapolation of the process dynamics between measurement updates is obtained by replacing a transition matrix with an operator spline that is optimized off-line from responses to selected test inputs