Characterizing droplet combustion of pure and multi-component liquid fuels in a microgravity environment

The importance of understanding the effects of fuel composition, length scales, and other parameters on the combustion of liquid fuels has motivated the examination of simple flames which have easily characterized flow fields and hence, the potential of being modeled accurately. One such flame for liquid fuel combustion is the spherically symmetric droplet flame which can be achieved in an environment with sufficiently low gravity (i.e., low buoyancy). To examine fundamental characteristics of spherically symmetric droplet combustion, a drop tower facility has been employed to provide a microgravity environment to study droplet combustion. This paper gives a brief review of results obtained over the past three years under NASA sponsorship (grant NAG3-987)

Modeling and Testing of the Viscoelastic Properties of a Graphite Nanoplatelet/Epoxy Composite

In order to facilitate the interpretation of experimental data, a micromechanical modeling procedure is developed to predict the viscoelastic properties of a graphite nanoplatelet/epoxy composite as a function of volume fraction and nanoplatelet diameter. The predicted storage and loss moduli for the composite are compared to measured values from the same material using three test methods; Dynamical Mechanical Analysis, nanoindentation, and quasi-static tensile tests. In most cases, the model and experiments indicate that for increasing volume fractions of nanoplatelets, both the storage and loss moduli increase. Also, the results indicate that for nanoplatelet sizes above 15 microns, nanoindentation is capable of measuring properties of individual constituents of a composite system. Comparison of the predicted values to the measured data helps illustrate the relative similarities and differences between the bulk and local measurement techniques

The Character Development Project Final Report

This report consists of three elements. The project outline offers an overview of the intervention and how it was implemented. Sections 3 to 6 include the Principal Investigators’ remarks (Professor Trevor Cooling), and the findings and recommendations of the researcher who designed the questionnaires and worked on data analysis (Dr Sabina Hulbert), and the researchers who undertook school visits and have worked on deriving qualitative case study data from the visits as well as school portfolios (Miss Caroline Thomas and Dr Peter Gregory). Finally, we include a summary of the evaluation report

Using presence-absence data to establish reserve selection procedures that are robust to temporal species turnover

Previous studies suggest that a network of nature reserves with maximum efficiency (obtained by selecting the minimum area such that each species is represented once) is likely to be insufficient to maintain species in the network over time. Here, we test the performance of three selection strategies which require presence-absence data, two of them previously proposed (multiple representations and selecting an increasing percentage of each species' range) and a novel one based on selecting the site where each species has exhibited a higher permanence rate in the past. Multiple representations appear to be a safer strategy than selecting a percentage of range because the former gives priority to rarer species while the latter favours the most widespread. The most effective strategy was the one based on the permanence rate, indicating that the robustness of reserve networks can be improved by adopting reserve selection procedures that integrate information about the relative value of sites. This strategy was also very efficient, suggesting that the investment made in the monitoring schemes may be compensated for by a lower cost in reserve acquisition

A new frontier in atherosclerotic coronary imaging

Comment on 18F-fluoride positron emission tomography for identification of ruptured and high-risk coronary atherosclerotic plaques: a prospective clinical trial.[Lancet. 2014