MACRO-ZOOPLANKTON ABUNDANCE IN RELATION TO METAL ACCUMULATION AND WATER QUALITY IN TRUC BACH LAKE

Urban lake pollution is one of the serious issues due to suffering of waste discharged from householders. However, there is a gap of knowledge about the diversity of zooplankton species and how metals accumulate in zooplankton in urban ecosystems. We addressed this by determining the rule of blooming macro-zooplankton in Truc Bach lake and levels of two essential metals: copper (Cu), and zinc (Zn) and of three non-essential metals: arsenic (As), and lead (Pb) in water samples were determined. The results showed that Cladocerans and copepods are macro-zooplankton dominant species in Truc Bach Lake. Water temperature significantly affects the variety of copepod blooming. Arsenic concentration in water collected from the lake exceeded the safety level of current Vietnamese regulation. As concentration in macro-zooplankton positively correlated with metal concentrations in the water (p 0.05) while the concentration of Cu, Zn, and Pb in water has no significant correlation with the metal in zooplankton’s body. The relative abundance of adult copepods in Truc Bach lake had a negative correlation with As concentration in water (p = 0.01). The higher As concentration in water, the lower relative abundance of copepods was found in the sample

CDIO-based teaching at universities: A case study for students majoring in electrical and electronic engineering technology, Vietnam

In the 1980s of the twentieth century, universities in developed countries began to realize the growing gap between the capabilities of new graduate engineers and the actual requirements of engineering branches. The strong progress of technology requires engineers to have the intellectual abilities and necessary job-specific skills to master that progress. This paper focuses on Conceive, Design, Implement and Operate (CDIO) approach-based teaching for students majoring in electrical and electronic engineering technology at engineering universities in Vietnam to demonstrate the feasibility of the teaching model. The experimental method of synthesizing qualitative and quantitative results for 90 students in control and experimental classes was used. The experimental and control classes both had 45 students. SPSS software version 22 was used to gather data and evaluate the learning results of the two experimental and control groups. According to the findings of the T-test analysis of the independent variables for the two groups, the experimental class performed better in academics and had students in the experimental group who were more satisfied with their post-test scores. This result contributes to confirm that the use of the CDIO-based teaching model in Vietnam is effective for students majoring in electrical and electronic engineering technology

Synthesis and Optical Characterization of Dye Doped in Ormosil Nanospheres for Bioapplications

Dye-doped ORMOSIL (organically modified silicate) nanoparticles (NPs) have significant advantages over single-dye labeling in signal amplification, photostability and surface modification for various biological applications. The dyes: Rhodamine 6G (R6G) and Rhodamine B (RB) were successfully incorporated into ORMOSIL nanoparticles fabricated by micellar nanochemistry from Trimethoxysilane CH$_3$Si(OCH$_3$)$_3$ precursor. The optical characterization of dye-doped ORMOSIL NPs was studied in comparison with it’s of free dye in solution. The results shown that the photostability of ORMOSIL dye doped nanospheres is much improved in comparison with it’s of dye in solution. Other studies of the photophysical properties such as anisotropy, fluorescence lifetime and energy transfer were also done

The Impact of CSR on Brand Identification, Word of Mouth and Consumer’s Repurchase Intention in the Retailer Industry

This study explored and measured the influence of corporation social responsibility (CSR) on consumers' re-purchase intentions through the mediators of brand identification and word of mouth (WOM). The quantitative method was applied in the research, and there were 287 valid respondents who had purchased something from the retailer store brands. The collected data was checked for reliability, convergence, and discriminant validity among the constructs before testing the hypothesis and the theoretical research model. In particular, the Cronbach alpha reliability, exploring factor analysis (EFA), confirmatory factor analysis (CFA), and structural equation model (SEM) were used to analyze the research data under the support of SPSS and AMOS software. The results indicate that CSR has significant effects on brand identification, WOM, and consumers' re-purchase intentions. Brand identification has a positive impact on consumers' repurchase intentions, whereas WOM has not. The findings have significant contributions to the marketing theory and provide management implications for managers, especially in retail store brands. Doi: 10.28991/ESJ-2023-07-06-021 Full Text: PD

The Relationship between Public Debt, Budget Deficit, and Sustainable Economic Development in Developing Countries: The Role of Corruption Control

This study investigates the effects of public debt and budget deficits on the sustainable economic development of developing countries, taking into account the role of control of corruption. The two-step GMM method was applied for unbalanced panel data of 59 developing countries from 2004 to 2015. The study found that public debt and the budget deficit had negative effects on sustainable development, while the effect of control of corruption was positive. Moreover, using interaction terms between control of corruption and public debt and budget deficit, respectively, empirical results showed that controlling corruption limited these adverse effects. Thus, if the objective is to achieve sustainable economic development, developing countries should not see raising public debt or maintaining budget deficits as a strategy for economic development. The study contributes empirical evidence to the theory of debt overhang, crowded effects, and institutional theory in the context of developing countries. The implications are also discussed in this paper

Decoding the capability of Lactobacillus plantarum W1 isolated from soybean whey in producing an exopolysaccharide

This study aims at producing exopolysaccharides (EPS) from a lactic acid bacterial strain. The soybean whey-isolated Lactobacillus plantarum W1 (EPS-W1), which belongs to genus Lactobacillus, is identified using the phenylalanyl-tRNA sequencing method. Of all the examined strains, R-49778 (as numbered by BCCM/LMG Bacteria Collection, Ghent University, Belgium) showed the highest capability of producing exopoly-saccharides. Structural characterization revealed a novel exopolysaccharide consisting of repeating units of -> 6)-D-Glcp-(1 ->; -> 3)-D-Manp-(1 ->; -> 3)-6-Glcp-(1 -> and a branch of -> 6)-D-Manp-(1 ->; -> 2)-D-Glcp-(1 ->. This discovery opens up avenues for the production of EPS for food industries, functional foods, and biomedical applications

Novel exopolysaccharide produced from fermented bamboo shoot-isolated Lactobacillus fermentum

This study aimed at providing a route towards the production of a novel exopolysaccharide (EPS) from fermented bamboo shoot-isolated Lactobacillus fermentum. A lactic acid bacteria strain, with high EPS production ability, was isolated from fermented bamboo shoots. This strain, R-49757, was identified in the BCCM/LMG Bacteria Collection, Ghent University, Belgium by the phenylalanyl-tRNA synthetase gene sequencing method, and it was named Lb. fermentum MC3. The molecular mass of the EPS measured via gel permeation chromatography was found to be 9.85 × 104 Da. Moreover, the monosaccharide composition in the EPS was analyzed by gas chromatography–mass spectrometry. Consequently, the EPS was discovered to be a heteropolysaccharide with the appearance of two main sugars—D-glucose and D-mannose—in the backbone. The results of one-dimensional (1D) and two-dimensional (2D) nuclear magnetic resonance spectroscopy analyses prove the repeating unit of this polysaccharide to be [→6)-β-D-Glcp-(1→3)-β-D-Manp-(1→6)-β-D-Glcp-(1→]n, which appears to be a new EPS. The obtained results open up an avenue for the production of novel EPSs for biomedical applications

Synthesis of cuprous oxide nanocubes combined with chitosan nanoparticles and its application to p-nitrophenol degradation

For the first time, cuprous oxide nanocubes (Cu2O NCBs) were successfully combined with chitosan nanoparticles (CS NPs) to generate Cu2O NCBs/CS NPs composites material with highly optical property and photocatalytic activity using a simple and eco-friendly synthetic approach at room temperature for 30 min. The synthesized Cu2O NCBs NPs/CS NPs were determined characterizations by Ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X – ray Diffraction (XRD),  Transmission Electron Microscope (TEM) and Energy-dispersive X-ray spectroscopy (EDX). Results show that the Cu2O NCBs/CS NPs composites have an average particle size of ~3-5 nm; in which, Cu2O has the form of nanocubes (Cu2O NCBs) with size ~3-4 nm and chitosan nanoparticles with spherical shape (CS NPs) with size ~4-5 nm. In addition, the percent (%) composition of elements present in Cu2O NCBs/CS NPs composites material have been obtained respective: Cu (23.99%), O (38.18%), and C (33.61%). Moreover, Cu2O NCBs/CS NPs composites material was also investigated for photocatalytic activity applied in p-nitrophenol degradation. The obtained results showed that the catalytic capability of Cu2O NCBs/CS NPs for p-nitrophenol reduction reached the highest efficiency >55% in the treatment time of 25 min, and this efficiency was higher than that result of using ZnO@chitosan nanoparticles (ZnO@CS NPs) catalyst under the same conditions for comparison

A Research on the Quality of Public Transportation Services by Bus in Vietnam

This study was conducted to assess the status of the quality of public passenger transport services by bus in Hanoi. Data were collected from regular passengers using buses as a means of transportation in the city, including passengers standing at stations, waiting shelters and on vehicles to make trips and students of some universities who use buses as a means of transportation. We employ descriptive statistics and hierarchical analysis to learn about the topic of research. The results indicate that the quality of public transport services by buses in Hanoi, which was judged by passengers quite well. In particular, the safety level, convenience, security and hygiene is up to 70%, which was higher than the highest quality level. Quality of fast level and reliability are low. Keywords: quality of services, public passenger transport, buses, Vietnam. DOI: 10.7176/RJFA/10-13-04 Publication date:July 31st 201