Foam fractionation :an effective technology for harvesting microalgae biomass

PhD ThesisHarvesting and dewatering can account for up to 30% of the overall cost of production of usable microalgae biomass for the biotechnology and bioenergy sectors. Harvesting is particularly challenging due to the small amount of algal biomass produced relative to water volume. This process exacts high energy and cost demands and therefore limits further expansion in the microalgae biomass industry. Foam fractionation has potential to deliver a low cost, low energy harvesting solution. Microalgae cells adsorb to the surface of a stream of fine air bubbles, which then rise up a closed column, discharging the concentrated product at the top. Foam fractionation significantly reduces construction, maintenance, and energy costs compared to other harvesting technologies. In this research, a fractional factorial design of experiments followed by a central composite design were used to determine the optimal levels of major variables influencing the harvest of the freshwater microalga Chlorella sp. The effects of bubble size within the liquid pool and foam phase of the harvesting unit were determined, a high concentration factor of 427 as achieved using fluidic oscillation for microbubble generation. The influence of microalgal growth phase on harvest efficiency was investigated to gain insight into the optimal time to harvest during cell cultivation. The effect of surfactant, used to induce foaming, on lipid recovery was examined through methods including total lipid recovery, gas chromatography, energy dispersive x-ray spectrometry and solid phase extraction. The results indicate that the surfactant had the additional benefit of significantly increasing the overall lipid recovery. These encouraging results suggest foam fractionation offers considerable potential as an efficient, low cost, and scalable microalgae biomass harvesting technology

Co-Creation Facilitates Translational Research on Upper Limb Prosthetics

People who either use an upper limb prosthesis and/or have used services provided by a prosthetic rehabilitation centre, hereafter called users, are yet to benefit from the fast-paced growth in academic knowledge within the field of upper limb prosthetics. Crucially over the past decade, research has acknowledged the limitations of conducting laboratory-based studies for clinical translation. This has led to an increase, albeit rather small, in trials that gather real-world user data. Multi-stakeholder collaboration is critical within such trials, especially between researchers, users, and clinicians, as well as policy makers, charity representatives, and industry specialists. This paper presents a co-creation model that enables researchers to collaborate with multiple stakeholders, including users, throughout the duration of a study. This approach can lead to a transition in defining the roles of stakeholders, such as users, from participants to co-researchers. This presents a scenario whereby the boundaries between research and participation become blurred and ethical considerations may become complex. However, the time and resources that are required to conduct co-creation within academia can lead to greater impact and benefit the people that the research aims to serve

Utilising light-emitting diodes of specific narrow wavelengths for the optimization and co-production of multiple high-value compounds in Porphyridium purpureum

The effect of specific narrow light-emitting diode (LED) wavelengths (red, green, blue) and a combination of LED wavelengths (red, green and blue - RGB) on biomass composition produced by Porphyridium purpureum is studied. Phycobiliprotein, fatty acids, exopolysaccharides, pigment content, and the main macromolecules composition were analysed to determine the effect of wavelength on multiple compounds of commercial interest. The results demonstrate that green light plays a significant role in the growth of rhodophyta, due to phycobiliproteins being able to harvest green wavelengths where chlorophyll pigments absorb poorly. However, under multi-chromatic LED wavelengths, P. purpureum biomass accumulated the highest yield of valuable products such as eicosapentaenoic acid (~2.9 %DW), zeaxanthin (~586 μg g− 1 DW), β-carotene (397 μg g− 1 DW), exopolysaccharides (2.05 g/L-1), and phycobiliproteins (~ 4.8 % DW). This increased accumulation is likely to be the combination of both photo-adaption and photo-protection, under the combined specific wavelengths employed

Co-Creation Facilitates Translational Research on Upper Limb Prosthetics

People who either use an upper limb prosthesis and/or have used services provided by a prosthetic rehabilitation centre, hereafter called users, are yet to benefit from the fast-paced growth in academic knowledge within the field of upper limb prosthetics. Crucially over the past decade, research has acknowledged the limitations of conducting laboratory-based studies for clinical translation. This has led to an increase, albeit rather small, in trials that gather real-world user data. Multi-stakeholder collaboration is critical within such trials, especially between researchers, users, and clinicians, as well as policy makers, charity representatives, and industry specialists. This paper presents a co-creation model that enables researchers to collaborate with multiple stakeholders, including users, throughout the duration of a study. This approach can lead to a transition in defining the roles of stakeholders, such as users, from participants to co-researchers. This presents a scenario whereby the boundaries between research and participation become blurred and ethical considerations may become complex. However, the time and resources that are required to conduct co-creation within academia can lead to greater impact and benefit the people that the research aims to serve

Co-Creation Facilitates Translational Research on Upper Limb Prosthetics

People who either use an upper limb prosthesis and/or have used services provided by a prosthetic rehabilitation centre, hereafter called users, are yet to benefit from the fast-paced growth in academic knowledge within the field of upper limb prosthetics. Crucially over the past decade, research has acknowledged the limitations of conducting laboratory-based studies for clinical translation. This has led to an increase, albeit rather small, in trials that gather real-world user data. Multi-stakeholder collaboration is critical within such trials, especially between researchers, users, and clinicians, as well as policy makers, charity representatives, and industry specialists. This paper presents a co-creation model that enables researchers to collaborate with multiple stakeholders, including users, throughout the duration of a study. This approach can lead to a transition in defining the roles of stakeholders, such as users, from participants to co-researchers. This presents a scenario whereby the boundaries between research and participation become blurred and ethical considerations may become complex. However, the time and resources that are required to conduct co-creation within academia can lead to greater impact and benefit the people that the research aims to serve