Effect of plant density and foliar fertilizer spray on growth and yield of netted melon (Cucumis melo L.) ‘Inthanon RZ’

The cultivation of netted melon is becoming popular in vegetable farms in Vietnam. The netted melon cultivar ‘Inthanon RZ’ was evaluated for its growth ability, yield, fruit quality, and economic efficiency when treated with densities of 38,000 and 33,000 plants/ha and four foliar fertilizer sprays: Biotic foliar AMINO ACID 1000, NPK NUTRI-GOLD 29-10-10 + 3 MgO + TE, NPK HAI-CHYODA 14-17-12 + 12 S, and NPK DAU TRAU 30-10-5 + TE. The experiment was conducted in a plastic house at the Biotechnology Institute of Hue University from January to April 2019. The experiment area was 72 m2. The results indicate that plants have a similar growth time under the cultivation conditions. The plants grown with the density of 38,000 plants/ha exhibit a higher leaf area index. The actual yield ranges from 34.00 tons/ha (AMINO ACID 1000; 33,000 plants/ha) to 46.22 tons/ha (NPK HAI-CHYODA 14-17-12 + 12 S; 38,000 plants/ha). Applying NPK HAI-CHYODA 14-17-12 + 12S or NPK DAU TRAU results in the Brix grade higher than 12.0 for both plant densities. Powdery mildew is the most frequently observed in the treatments with NPK DAU TRAU. The yield and profit obtained from trading the melon are highest for the density of 38,000 plants/ha with fertilizer NPK HAI-CHYODA 14-17-12 + 12S

Influence of nitrogen level and plant density on growth parameters and economic efficiency of sunflower cultured in Thua Thien Hue province

Sunflower (Helianthus annuus) cultivation is gaining popularity among Vietnamese farmers. Two separate experiments were conducted from January to April 2018 in a randomized complete block design with three replicates. Four levels of each factor were included in the experiments: 0, 20, 40, and 60 kg/ha for nitrogen and 11, 13, 16, and 20 plants/m2 for the density. The nitrogen fertilizer (up to 60 kg/ha) substantially affects the leaf area, diameters of stem plant, receptacle and flower head, and cut flower vase life. Low plant density works well on plant height, leaf number, width and length at the flowering stage, with the largest head diameter (17.2 cm) at the 13 plants/m2 density. Based on the results of both growth ability and economic efficiency, we suggested applying N at 60 kg/ha and planting at 16 plants/m2 density for growing F1 cut sunflowers in Thua Thien Hue province

CORRELATIONS BETWEEN FRUIT’S YIELD WITH HORTICULTURAL TRAITS AND INHERITANCE OF MORPHOLOGICAL TRAITS OF SPONGE GOURD (LUFFA CYLINDRICA)

Abstract: Enhancing the production yield fornew generations of each horticultural crop needseffective selecting programs to find outexcellent traits forming thisfruit yield. Therefore,this study aims to investigate the correlations between the fruit yield withhorticultural traits, mainly with yield’s components and inheritance of some morphological traitsofsponge gourd (Luffa cylindrica). An F2 population was generated from a cross between sponge gourds GBVN006904 (male) and GBVN005333 (female) at University of Agriculture and Forestry, Hue University,Vietnam. The positive correlations are observed between the fruit yield per plant andthe fruit diameter, fruit weight, and number of fruits per plant (0.901**). The male first flower appearance time showsa significant positive correlation with female first flower appearance one. The peduncle length correlates positively with the fruit length. The fruit length is enhanced when fruit weight increases. The total soluble solids and fruit diameter show a slightly negative correlation. Chi-square analysis for the leaf shape, depth of lobing, leaf color, and leaf pubescence shows a good fit to a ratio of 9:6:1, thus being controlled by duplicate genes interaction. The fruit color (dark-green:light-green) fits well to a ratio of 15:1, giving its control to duplicate genes with dark-green color being dominant, whereas the fruit shape assorts independently according toa ratio of 9:3:3:1. The fruit stripe color exhibits monogenic incomplete dominance, and the curvature of the fruit is a monogenic recessive trait. Fruit yield components, such as the number of fruit per plant, the fruit weight, and the fruit diameter,strongly affect the fruit yield of sponge gourd. The inheritance of morphological traits indicates that most of the traits are controlled by complete dominance at both gene pairs excepted for fruit strip color and curvature of fruit.Keywords: correlation, inheritance, morphological traits, sponge gourd, yield component

Invited review. Bond dissociation enthalpies in benzene derivatives and effect of substituents: an overview of density functional theory (B3LYP) based computational approach

In this review, we have mainly focused on the recent computational studies on the bond dissociation enthalpies (BDE) of the X‒H bonds of the para and meta substituted benzene derivatives (3Y-C6H4X‒H and 4Y-C6H4X‒H with X = O, S, Se, NH, PH, CH2, SiH2 and Y = H, F, Cl, CH3, OCH3, NH2, CF3, CN, NO2). In addition, the remote substituent effects on the BDE(X‒H), the radical stability and parent one have also been discussed in terms of the calculated ground state effect, radical effect and total effect. Model chemistry of ROB3LYP/6-311++G(d,p)//B3LYP/6-311G(d,p) can reproduce the BDE values with the accuracy of 1.0‒2.0 kcal/mol. The good linear correlations between Hammett constants and BDE values were discovered for both para and meta substitutions in phenols, thiophenols, benzeneselenols, anilines and phenylposphines with the R-squared lager than 0.94. In contrast, it does not occur in case of toluenes and phenylsilanes.Keywords. Benzene derivatives, density functional theory, bond dissociation enthalpies, substituent effects, radical effect, ground state effect, total effect, Hammett constants

Interest rate pass-through estimates from error correction models ECM

This paper examines the degree of pass-through and adjustment speed of retail interest rates in response to changes in monetary policy rates in commercial banks of Viet Nam during the period 07/2004 to 06/2014. The results show that the degree of pass-through of retail interest rates is incomplete but high (0.7-0.93). The adjustment speed of money market rates & retail interest rates is relatively slow. It takes from 3 to 6 months for money market rates & retail interest rates to be adjusted to long-term equilibrium, except 1 month VNIBOR. 1 month VNIBOR is sensitive to changes of discount rate & refinancing rate in short-term, contrary to 3 month VNIBOR . The degree of pass-through from market rates to retail interest rates is fairly high in the long-term but low in the short-term. The degree of pass-through is different between various retail interest rates. Specifically, the degree of pass-through of deposit rates is higher than that of lending rates both in the short-term & long-term

Influence of biofertilizer produced using drumstick (Moringa oleifera L.) unused parts on the growth performance of two leafy vegetables

The non-edible parts of Moringa oleifera, such as stems, branches or leaf petioles, have often been discarded while the leaves are consumed as a vegetable or are used to produce organic fertilizer. This study aimed to determine the optimal conditions for producing Moringa organic fertilizer (MOF) from previously unused parts and to compare these fertilizers with cow manure and bio-organic fertilizer. Seventy kilograms of the unused Moringa parts were blended with fifty kilograms of manure, 0.2 kilogram of Trichoderma-based product and two kilograms of superphosphate. The mixture was incubated at different intervals, including 5, 7 or 9 weeks. Next, the effects of MOF on the growth, yield, ascorbic acid content and Brix of lettuce and mustard spinach were also determined and compared with other organic fertilizers (cow manure and bio-organic fertilizer). Results of the study revealed that 25 tons per ha of MOF were significantly superior to those treated with cow manure and bio-organic fertilizer in the case of vegetable yields. Further, 7 weeks of MOF incubation was found suitable to produce an optimal yield during the various incubation period. These results suggested that the Moringa non-edible parts can make organic fertilizer and enhance growth, yield, and leafy vegetable production

Factors affecting the creativity of high school students

Creativity is a vital personality quality of each individual. Each person has their potential for creativity, and it can be nurtured and developed in an appropriate and safe environment. The purpose of the study was to find out which factors from schools and students themselves affect creativity as well as the association between creativity and age, gender and giftedness of students, which then a basis to adjust and establish appropriate methods from schools, families, and students themselves to develop elements and their creativity. The study was conducted on 108 high school students in three grades from giftedness and non-giftedness schools. The data was collected through a survey method using a self-constructed questionnaire and drawing creativity test TCT-DP to determine students' creativity levels and personal information. The study's finding, which uses mathematical methods and one-way analysis of variance, reveals that factors affecting elements and creativity level are objective factors including education environment from school; behavior of teachers, and subjective factors including interests, perspectives, and thoughts of students. It was also found that there were no significant differences in the components of creativity and creativity among students in different grades, gender, and groups of giftedness schools

LEARNING IDIOMS FOR ENGLISH MAJORS: VIETNAMESE STUDENTS’ PERCEPTIONS OF DIFFICULTIES AND LEARNING STRATEGIES

Learning idioms play an influential role in language generally and in English notably. Comprehending idioms assists language learners in integrating culture, enhancing skills, and ameliorating English levels. Numerous studies have analyzed the function of idioms in second language acquisition (Cieślicka, 2015). This study investigates the difficulties and strategies used in learning idioms by English-majored students at a regional public university (PU) in the south of Vietnam. This paper furnishes data showing learners’ perceptions of facing complications and learning methods. The samples consisted of 150 undergraduate EFL students from English-medium instruction programs. The data was analyzed by utilizing descriptive and inferential statistics. The findings reveal that students struggle to understand idiomatic terms without specific, understandable contexts. Furthermore, the results indicate that the most frequently employed strategies are guessing the meaning of idioms, learning idioms through keywords, and learning from a range of sources, particularly via media. The findings also mentioned that low-proficiency and high-proficiency students encounter identical challenges, with no significant differences. The study's results revealed that the majority of students have difficulty acquiring, recognizing, and interpreting idioms. The findings indicated that guessing the implication of idioms is the most used strategy.  Article visualizations

Sex discrimination based on morphological traits in Mystus mysticetus Roberts, 1992

This study supplemented the way of sex determination of fish based on the regression relationship of some morphological indicators of Mystus mysticetus. A total of 425 fish specimens were collected by trawl nets at Cai Rang - Can Tho and Long Phu - Soc Trang from January to July 2022. After collection, the fish were transferred to the laboratory to determine their total length (TL), standard length (SL), eye diameter (ED), eye distance (DE), body height (BD), head length (HL), and mouth width (MD) before anatomy for sex determination based on gonads. The regression analysis results of TL-SL, TL-ED, TL-DE, TL-BD, TL-HL, and TL-MD showed that SL, DE, and MD could be used to determine the sex of this fish species because SL and DE were dominant in growth in males, and MD was prevalent in females. In addition, SL could be used to determine the sampling time and HL to determine the distribution environment