Prediction of the acoustic impedance of duct liners

Recent research which contributes to the prediction of the acoustic impedance of duct liners is reviewed. This review includes the linear and nonlinear properties of sheet and bulk type materials and methods for the measurement of these properties. It also includes the effect of grazing flow on the acoustic properties of materials. Methods for predicting the properties of single or multilayered, point reacting or extended reaction, and flat or curved liners are discussed. Based on this review, methods for predicting the properties of the duct liners which are typically used in aircraft engines are recommended. Some areas of needed research are discussed briefly

Economic predictions for heat mining : a review and analysis of hot dry rock (HDR) geothermal energy technology

The main objectives of this study were first, to review and analyze several economic assessments of Hot Dry Rock (HDR) geothermal energy systems, and second, to reformulate an economic model for HDR with revised cost components.A general evaluation of the technical feasibility of HDR technology components was also conducted in view of their importance in establishing drilling and reservoir performance parameters required for any economic assessment (see Sections 2-5). In our review, only economic projections for base load electricity produced from HDR systems were considered. Bases of 1989 dollars ($) were selected to normalize costs.Following the evaluation of drilling and reservoir performance, power plant choices and cost estimates are discussed in Section 6. In Section 7, the six economic studies cited earlier are reviewed and compared in terms of their key resource, reservoir and plant performance, and cost assumptions. Based on these comparisons, we have estimated parameters for three composite cases. Important parameters include: (1) resource quality--average geothermal gradient (oC/km) and well depth, (2) reservoir performance--effective productivity, flow impedance, and lifetime (thermal drawdown rate), (3) cost components--drilling, reservoir formation, and power plant costs and (4) economic factors--discount and interest rates, taxes, etc. In Section 8, composite case conditions were used to reassess economic projections for HDRproduced electricity. In Section 9, a generalized economic model for HDR-produced electricity is presented to show the effects of resource grade, reservoir performance parameters, and other important factors on projected costs. A sensitivity and uncertainty analysis using this model is given in Section 10. Section 11 treats a modification of the economic model for predicting costs for direct, non-electric applications. HDR economic projections for the U.S. are broken down by region in Section 12. In Section 13, we provide recommendations for continued research and development to reduce technical and economic uncertainties relevant to the commercialization of HDR

Cofinement, entropy, and single-particle dynamics of equilibrium hard-sphere mixtures

We use discontinuous molecular dynamics and grand-canonical transition-matrix Monte Carlo simulations to explore how confinement between parallel hard walls modifies the relationships between packing fraction, self-diffusivity, partial molar excess entropy, and total excess entropy for binary hard-sphere mixtures. To accomplish this, we introduce an efficient algorithm to calculate partial molar excess entropies from the transition-matrix Monte Carlo simulation data. We find that the species-dependent self-diffusivities of confined fluids are very similar to those of the bulk mixture if compared at the same, appropriately defined, packing fraction up to intermediate values, but then deviate negatively from the bulk behavior at higher packing fractions. On the other hand, the relationships between self-diffusivity and partial molar excess entropy (or total excess entropy) observed in the bulk fluid are preserved under confinement even at relatively high packing fractions and for different mixture compositions. This suggests that the partial molar excess entropy, calculable from classical density functional theories of inhomogeneous fluids, can be used to predict some of the nontrivial dynamical behaviors of fluid mixtures in confined environments.Comment: submitted to JC

Acoustic Investigation of Jet Mixing Noise in Dual Stream Nozzles

In an earlier study, a prediction model for jet noise in dual stream jets was proposed that is founded on velocity scaling laws in single stream jets and similarity features of the mean velocity and turbulent kinetic energy in dual stream flows. The model forms a composite spectrum from four component single-stream jets each believed to represent noise-generation from a distinct region in the actual flow. While the methodology worked effectively at conditions considered earlier, recent examination of acoustic data at some unconventional conditions indicate that further improvements are necessary in order to expand the range of applicability of the model. The present work demonstrates how these predictions compare with experimental data gathered by NASA and industry for the purpose of examining the aerodynamic and acoustic performance of such nozzles for a wide range of core and fan stream conditions. Of particular interest are jets with inverted velocity and temperature profiles and the appearance of a second spectral peak at small aft angles to the jet under such conditions. It is shown that a four-component spectrum succeeds in modeling the second peak when the aft angle refraction effects are properly incorporated into the model. A tradeoff of noise emission takes place between two turbulent regions identified as transition and fully mixed regions as the fan stream velocity exceeds that of the core stream. The effect of nozzle discharge coefficients will also be discussed

The role of nutrient loading and eutrophication in estuarine ecology.

Eutrophication is a process that can be defined as an increase in the rate of supply of organic matter (OM) to an ecosystem. We provide a general overview of the major features driving estuarine eutrophication and outline some of the consequences of that process. The main chemical constituent of OM is carbon (C), and therefore rates of eutrophication are expressed in units of C per area per unit time. OM occurs in both particulate and dissolved forms. Allochthonous OM originates outside the estuary, whereas autochthonous OM is generated within the system, mostly by primary producers or by benthic regeneration of OM. The supply rates of limiting nutrients regulate phytoplankton productivity that contributes to inputs of autochthonous OM. The trophic status of an estuary is often based on eutrophication rates and can be categorized as oligotrophic (<100 g C m(-2) y(-1), mesotrophic (100-300 g C m(-2) y(-1), eutrophic (300-500 g C m(-2) y(-1), or hypertrophic (>500 g C m(-2) y(-1). Ecosystem responses to eutrophication depend on both export rates (flushing, microbially mediated losses through respiration, and denitrification) and recycling/regeneration rates within the estuary. The mitigation of the effects of eutrophication involves the regulation of inorganic nutrient (primarily N and P) inputs into receiving waters. Appropriately scaled and parameterized nutrient and hydrologic controls are the only realistic options for controlling phytoplankton blooms, algal toxicity, and other symptoms of eutrophication in estuarine ecosystems

Classification and identification of Pfiesteria and Pfiesteria-like species.

Dinoflagellates can be classified both botanically and zoologically; however, they are typically put in the botanical division Pyrrhophyta. As a group they appear most related to the protistan ciliates and apicomplexans at the ultrastructure level. Within the Pyrrhophyta are both unarmored and armored forms of the dominant, motile flagellated stage. Unarmored dinoflagellates do not have thecal or wall plates arranged in specific series, whereas armored species have plates that vary in thickness but are specific in number and arrangement. In armored dinoflagellates, the plate pattern and tabulation is a diagnostic character at the family, subfamily, and even genus levels. In most cases, the molecular characterization of dinoflagellates confirms the taxonomy on the basis of external morphology; this has been demonstrated for several groups. Together, both genetic and morphological criteria are becoming increasingly important for the characterization, separation, and identification of dinoflagellates species. Pfiesteria and Pfiesteria-like species are thinly armored forms with motile dinospore stages characterized by their distinct plate formulae. Pfiesteria piscicida is the best-known member of the genus; however, there is at least one other species. Other genetically and morphologically related genera, now grouped under the common names of "Lucy," "Shepherd's crook," and cryptoperidiniopsoid, are being studied and described in separate works. All these other heterotrophic dinoflagellate groups, many of which are thought to be benign, co-occur in estuarine waters where Pfiesteria has been found

Validation of a 5-item Tool to Measure Patient Assessment of Clinician Compassion in the Emergency Department.

BACKGROUND: To test if the 5-item compassion measure (a tool previously validated in the outpatient setting to measure patient assessment of clinician compassion) is a valid and reliable tool to quantify a distinct construct (i.e. clinical compassion) among patients evaluated in the emergency department (ED). METHODS: Cross-sectional study conducted in three academic emergency departments in the U.S. between November 2018 and April 2019. We enrolled adult patients who were evaluated in the EDs of the participating institutions and administered the 5-item compassion measure after completion of care in the ED. Validity testing was performed using confirmatory factor analysis. Cronbach\u27s alpha was used to test reliability. Convergent validity with patient assessment of overall satisfaction questions was tested using Spearman correlation coefficients and we tested if the 5-item compassion measure assessed a construct distinct from overall patient satisfaction using confirmatory factor analysis. RESULTS: We analyzed 866 patient responses. Confirmatory factor analysis found all five items loaded well on a single construct and our model was found to have good fit. Reliability was excellent (Cronbach\u27s alpha = 0.93) among the entire cohort. These results remained consistent on sub-analyses stratified by individual institutions. The 5-item compassion measure had moderate correlation with overall patient satisfaction (r = 0.66) and patient recommendation of the ED to friends and family (r = 0.57), but reflected a patient experience domain (i.e. compassionate care) distinctly different from patient satisfaction. CONCLUSIONS: The 5-item compassion measure is a valid and reliable tool to measure patient assessment of clinical compassion in the ED

Identification of larval sea basses (Centropristis spp.) using ribosomal DNA-specific molecular assays

This paper is not subject to U.S. copyright. The definitive version was published in Fishery Bulletin 106 (2008): 183-193.The identification of sea bass (Centropristis) larvae to species is difficult because of similar morphological characters, spawning times, and overlapping species ranges. Black sea bass (Centropristis striata) is an important fishery species and is currently considered to be overfished south of Cape Hatteras, North Carolina. We describe methods for identifying three species of sea bass larvae using polymerase chain reaction (PCR) and restriction fragment length polymorphism (RFLP) assays based on species-specific amplification of rDNA internal transcribed spacer reg ions. The assays were tested against DNA of ten other cooccurring reef fish species to ensure the assay’s specificity. Centropristis larvae were collected on three cruises during cross-shelf transects and were used to validate the assays. Seventysix Centropristis larvae were assayed and 69 (91%) were identified successfully. DNA was not amplified from 5% of the larvae and identification was inconclusive for 3% of the larvae. These assays can be used to identify sea bass eggs and larvae and will help to assess spawning locations, spawning times, and larval dispersal.Collection of larvae at sea was supported by funding from the National Science Foundation through OCE 9876565 to C. Jones, S. Thorrold, A. Valle-Levinson, and J. Hare. Additional funding for this project was provided by Office of National Marine Sanctuaries and by Grays Reef National Marine Sanctuary

Diffuse charge and Faradaic reactions in porous electrodes

Porous electrodes instead of flat electrodes are widely used in electrochemical systems to boost storage capacities for ions and electrons, to improve the transport of mass and charge, and to enhance reaction rates. Existing porous electrode theories make a number of simplifying assumptions: (i) The charge-transfer rate is assumed to depend only on the local electrostatic potential difference between the electrode matrix and the pore solution, without considering the structure of the double layer (DL) formed in between; (ii) the charge-transfer rate is generally equated with the salt-transfer rate not only at the nanoscale of the matrix-pore interface, but also at the macroscopic scale of transport through the electrode pores. In this paper, we extend porous electrode theory by including the generalized Frumkin-Butler-Volmer model of Faradaic reaction kinetics, which postulates charge transfer across the molecular Stern layer located in between the electron-conducting matrix phase and the plane of closest approach for the ions in the diffuse part of the DL. This is an elegant and purely local description of the charge-transfer rate, which self-consistently determines the surface charge and does not require consideration of reference electrodes or comparison with a global equilibrium. For the description of the DLs, we consider the two natural limits: (i) the classical Gouy-Chapman-Stern model for thin DLs compared to the macroscopic pore dimensions, e.g., for high-porosity metallic foams (macropores >50 nm) and (ii) a modified Donnan model for strongly overlapping DLs, e.g., for porous activated carbon particles (micropores <2 nm). Our theory is valid for electrolytes where both ions are mobile, and it accounts for voltage and concentration differences not only on the macroscopic scale of the full electrode, but also on the local scale of the DL. The model is simple enough to allow us to derive analytical approximations for the steady-state and early transients. We also present numerical solutions to validate the analysis and to illustrate the evolution of ion densities, pore potential, surface charge, and reaction rates in response to an applied voltage